现有合成氨厂建设8万吨/年硫酸钾及4万吨/年纯碱装置的可行性

本文试图论述现有合成氨厂改变产品结构,采取以生产化肥为主,联产化工产品。通过对钾芒硝法工艺及联碱工艺技术路线的选择,技术经济分析,以期提高化肥厂的经济效益。     

吸附回收氯乙烯精馏尾气中高浓度氯乙烯新工艺

用活性炭纤维作吸附剂，吸附并回收氯乙烯精馏尾气中的氯乙烯。与传统的工艺相比，具有流程短、吸附回收效率高、运行稳定、自动化程度高、安全性能好、投资和运行费用低等优点。在天津大沽化工有限责任公司的实际运行表明，氯乙烯的回收率稳定在90％以上，收到了很好的经济效益和环境效益。     

优质饮用水直接进户试验研究

针对目前上海市自来水水质存在的不足,试验了三种水质深度处理工艺。试验证明,该三种工艺对浊度、色度、耗氧量、余氯、氨等指标均有明显的去除效果。在其它水质指标方面,符合建设部2002年“水质目标”及欧盟水质标准的要求,最后确定了一种工艺用于小区供水。     

重金属废水处理最新进展

详细论述了近年来一些处理重金属废水的新方法，并对各种方法进行了综合评述。这些新方法主要有：廉价吸附剂吸附、胶束增强超滤、络合—超滤耦合过程和电化学法。此外，将络合—超滤和电化学法集成起来处理重金属废水，可实现废水回用和重金属回收，因而具有广阔的应用前景。     

回收废旧PVC的新技术

综述几种回收废旧PVC(聚氯乙烯)的工艺，包括溶剂法、机械法、化学法及焚烧法，其中的2种溶剂法都是欧洲新近开发的。溶剂法回收PVC的价格远低于新PVC。     

工业管道测厚技术在化工厂的应用

本文较为详细地介绍了工业管道的规范化管理及其在化工厂的应用。指出管道定期定点测厚和计算机管理是工业管道规范化管理的重要内容。通过实施这一管理措施可以提高企业的经济效益和社会效益。     

精密注塑件的生产稳定性探讨

针对精密注塑件的生产,介绍了设计,成型精密注塑件的基本要求,探讨了原材料,注塑机,电压,环境温湿度及模具积垢等因素对生产精密注塑件稳定性的影响,研究了评估工艺参数敏感性的试验方法和获得稳定工艺的手段;说明了统计过程控制（SPC）的基本原理,以及如何利用控制图和工序能力指数CP,CPK来评估,预测工序能力,确保工序确定性。     

两种基于个体偏好集结的多属性群决策共识方法

针对多属性群决策中的共识问题, 提出两种使群体达成共识的方法. 假设群体决策的结果以从个体偏好通过集结得到的群体偏好为基础, 在使用算术加权集结算子和几何加权集结算子的条件下, 分别设计相应的共识达成算法, 并对算法的收敛性进行分析. 与已有方法相比, 所提出算法能够体现决策个体的差异和决策个体对群体的影响. 通过某市政图书馆空调系统安装方案的选择表明了所提出方法的合理性和可行性.

     

Viability study of different reverse osmosis membranes for application in the tertiary treatment of wastes from the tanning industry

The tanning industry uses large quantities of water and produces a correspondingly large amount of wastewater with high levels of salts and organic materials. Before these wastewaters can be eliminated, they must be submitted to a suitable depuration treatment. However, conventional treatments such as those used for urban wastewater are not able to reduce the salt content sufficiently and new methods need to be studied in the light of new technologies. In this aspect, membrane technology is increasingly used as a separation technique in chemical and environmental engineering, including desalination, selective separation and wastewater treatment. In this paper, we describe a comparative study of six different reverse osmosis membranes, which were tested for their ability to reduce the salt content in the tertiary treatment after the elimination of chromium salts and organic matter of an effluent from a pilot plant for treating industrial wastewater from the tanning industry to reach the legal levels established for their safe disposal. The membranes were checked using a 3×10⁻³ m² flat cell, where the concentrated streams were recirculated to the feed reservoir.     

Electrochemical formation of AlN in molten LiCl-KCl-Li3N systems

Electrochemical formation of aluminum nitride was investigated in molten LiCl-KCl-Li₃N systems at 723 K. When Al was anodically polarized at 1.0 V (versus Li⁺/Li), oxidation of nitride ions proceeded to form adsorbed nitrogen atoms, which reacted with the surface to form AlN film. The obtained nitrided film had a thickness of sub-micron order. The obtained nitrided layer consisted of two regions; the outer layer involving AlN and aluminum oxynitride and the inner layer involving metallic Al and AlN. When Al electrode was anodically polarized at 2.0 V, anodic dissolution of Al electrode occurred to give aluminum ions, which reacted with nitride ions in the melt to produce AlN particles (1-5 μm of diameter) of wurtzite structure.