Reynolds number-dependent permeability of wastewater sludge flocs

Most theoretical models assume constant permeability of wastewater sludge floc. This work shows that, at creeping flow limit with small intrafloc Reynolds number, the permeability of floc can not only be affected by floc structure, but also by the external flow condition. The three-dimensional structure of flocs using the fluorescence in situ hybridization (FISH) and the confocal laser scanning microscope (CLSM) was firstly probed. Then, the volumetric grid models for sludge flocs were constructed. We noted that the floc permeability could keep unchanged, increased, or decreased at increased Reynolds number (Re). Flow redistribution among channels of various sizes contributes to the noted Re-dependent permeability of flocs.     

辽河流域平原区浅层地下水水化学特征和水质状况

本文根据多年地下水水质监测资料和近期实测监测资料,系统地对辽河流域平原区浅层地下水的水化学特征进行了分析,并对浅层地下水的水质类别及水质污染状况进行了分析评价.结果表明:平原区地下水化学类型以重碳酸盐型为主,浅层地下水有污染加重和扩大的趋势.     

陕西南部路基病害分布特征及主要控制因素探讨

在统计分析的基础上,归纳总结了陕西南部各类路基病害的分布特征,并从自然因素和人为因素两个方面分析了各类路基病害发生的主要控制因素。     

大豆蛋白纤维的性能及产品开发

主要描述了大豆蛋白纤维的性能，介绍了大豆蛋白纤维的生产以及大豆蛋白纺织新产品的开发。     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Shallow Turbulent Flows by Video Imaging Method

Shallow turbulent flows were produced in a tank of small thickness to study the friction effects on large-scale turbulent motion of small depth. The tank was constructed of two parallel walls. The space between the parallel walls (4.4, 1.57, and 0.59 cm) was small compared with the height (107 cm) and the width (212 cm) of the tank, and was varied during the experiments for different friction effects. Turbulent flows were produced by the injection of water in the form of starting jets into the tank filled with water. The large-scale turbulent flow in the small space between the walls of the tank is confined to essentially two-dimensional motion, and the motion is retarded by the force of friction. Dye was injected with the source fluid as the tracer for the highly unsteady and quasitwo-dimensional turbulent motion. From the initiation of the turbulent motion at the source to the final interaction of the jets with the tank bottom, the entire sequence of events was recorded by a pair of video cameras. The depth-averaged concentration of the dye was analyzed using the recorded video images.     

1 000 t/d湿磨干烧生产线工艺特点和调试

湿法生产线的技术更新改造有异地新建新型干法生产线和原地改成湿磨干法生产线二种。浙江虎山集团(?)3.0 m×88.68 m湿法线的改造,经方案比较和生产原料的状况,采用了湿磨干烧方案。其中,料浆脱水采用了真空吸滤法,浇成系统采用了南京院专有技术。改造投产后,获得了优质、高产、低耗和安全生产的技改效果。     

可与氟树脂基板相匹敌的热可塑性树脂基板材料

概述了可以与氟树脂基板相匹敌的低介质特性的热可塑性树脂基板材料的开发和应用。     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

A kinetic model for the acid-oxygen pressure leaching of Ni–Cu matte

A semi-empirical mathematical model for the acid-oxygen pressure leaching of Ni–Cu matte is presented, based on data from batch leaching experiments. The primary controlling factor in the leaching process is found to be galvanic inhibition of the more highly oxidized copper and nickel sulfide species by less oxidized species, particularly Ni alloy and Ni₃S₂. The leaching rate of many species is greatly reduced by the presence of one or both of these phases, and others will not commence leaching until neither is present. The mathematical model is based on first-order chemical reaction controlled rate expressions, as the reactions occurring are electrochemical in nature. Mass transfer effects are included only empirically. Some possibly diffusion-related phenomena are noted, although the model is not extended to incorporate these effects on a fundamental level. The model is verified and extended by the inclusion of several different factors that were tested experimentally. The effects of variations in O₂ flow rate and partial pressure, initial particle size, reaction pulp density and initial acid concentration were all studied, and included in the model. Variations in O₂ flow rate and partial pressure are found to affect the reaction rates via the dissolved oxygen concentration in the solution phase.