Extraction of Singular Points from Dense Motion Fields: An Analytic Approach

In this paper we propose a new method to extract the vortices, sources, and sinks from the dense motion field preliminary estimated between two images of a fluid video. This problem is essential in meteorology for instance to identify and track depressions or convective clouds in satellite images. The knowledge of such points allows in addition a compact representation of the flow which is very useful in both experimental and theoretical fluid mechanics. The method we propose here is based on an analytic representation of the flow. This approach has the advantage of being robust, simple, fast and requires few parameters.     

Synthesis and Spectral Properties of Mixed-Ligand Complexes of Lanthanide Perchlorate with Bis-(phenylsulfinyl)ethane and Organic Lewis Bases

ＳｙｎｔｈｅｓｉｓａｎｄＳｐｅｃｔｒａｌＰｒｏｐｅｒｔｉｅｓｏｆＭｉｘｅｄＬｉｇａｎｄＣｏｍｐｌｅｘｅｓｏｆＬａｎｔｈａｎｉｄｅＰｅｒｃｈｌｏｒａｔｅｗｉｔｈＢｉｓ（ｐｈｅｎｙｌｓｕｌｆｉｎｙｌ）ｅｔｈａｎｅａｎｄＯｒｇａｎｉｃＬｅｗｉｓＢａｓｅ...     

Bright Blue Light—emitting Diodes Based on a Novel Fluorescent Dye Containing Heterocyclic Groups

Novel molecular material ,1-benzothiazoly-3-pheny1-pyrazoline (BTPP) was found to function as bright blue light emitting dye in organic electroluminescent device, and its optical and electric characteristics were investigated. This heterovyclic compound exhibited good characteristics of blue photoluminescence and electroluminescence,which had the emission peak at 450nm .The single layer light-emitting devices using BTPP as light -emitting material dispersed in poly(N-vinylcarbazole)(PVK) and double layer ones using PBD as hole block layer above the light-emitting layer were fabricated using conventional spin-casting and vaccum vapour deposition methods. The introduction of PBD has enhanced electron injection and luminance efficiency, compared with the single layer LEDs.     

Determination of gust action stress cycle counts for fatigue checking of line-like steel structures

The classical spectral analysis of structural response to a gusty wind is applied to the prediction of fatigue damage as expressed by the rate of accumulation of Miner's quotient, using the rainflow algorithm to establish stress-range cycle counts. A general solution in chart form is given for the effect of the broad-band (quasi-static) part of the response spectrum, together with an algebraic formulation for its combination with the effect of narrow-band (quasi-resonant) response.A procedure for integration of the long-term expectation of Miner's quotient is indicated. It is concluded that quasi-static response alone is unlikely to pose a serious fatigue problem. With generally anticipated levels of dynamic response, fatigue damage is greatly increased, but can be controlled at acceptable levels by care to avoid features especially sensitive to fatigue.     

超高摩尔质量聚乙烯内衬复合管应用前景展望

通过对超高摩尔质量聚乙烯内衬复合管的技术特点及国内外现场试验效果的阐述；证明了超高摩尔质量聚乙烯内衬复合管自身的各种物理特性。对延长旧管使用寿命,减少杆管偏磨,延长油井清蜡周期具有良好的效果。     

烯烃聚合工业用有机过氧化物危险性分析及对策研究

有机过氧化物是烯烃聚合工业中重要的引发剂。针对烯烃聚合工业用有机过氧化物自分解温度低、易发生反应失控引发火灾爆炸等情况,简要叙述了有机过氧化物的结构、分类、化学性质以及反应特性,重点对其储存、使用、管理等过程中的危险性进行了分析。提出过氧化物储存、运输、使用、报废等方面的风险消减与事故预防措施。     

Space-charge-limited currents for organic solar cells optimisation

Basic suppositions and microphysical origin of the occurrence of the space-charge-limited currents (SCLC) are presented in general and for the temperature-modulated space-charge-limited currents (TM-SCLC) in particular. The criteria are given for the spectroscopical method TM-SCLC to be used for localized electron states elucidation in organic semiconducting materials for organic solar cells optimization and modelling. The “visibility “of the localized states by SCLC method, i.e. the power of the SCLC method to distinguish the localized states, is tested by the modelling, varying the temperature, energy position of localized states and their concentration. Generally, it was determined that the SCLC measurements results are more reliable with the increased energy of the states, with their increased concentration and with decreased temperature. The correlation (or its absence) between the measured current and activation energy on applied voltage, expressed by the dependence of preexponential factor of conductivity on activation energy (Meyer–Neldel rule), gives the possibility to determine the energy range where the reconstruction of density of localized states function is reliable.     

Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

Eight mole percent yttria stabilized zirconia powders by organic precursor route

An organic precursor-mixing route has been developed for preparation of 8 mol% yttria stabilized zirconia (8YSZ) ceramics. Polymeric salt of succinic acid with yttrium and zirconium has been prepared separately by treating sodium succinate with yttrium chloride and zirconyl chloride followed by washing with water and drying at 120 °C. Thorough mixing of the two salts in stoichiometric proportions by planetary ball milling followed by calcination at 850 °C resulted in a precursor powder containing nanocrystalline (∼40 nm) monoclinic zirconia, tetragonal YSZ, cubic YSZ and yttria. Compacts prepared after deagglomeration of powder by planetary ball milling produce 8YSZ ceramics having density 99.3% TD on sintering at 1550 °C for 2 h.     

Chemical vapor deposition of aluminum for ulsi applications

Aluminum has been used widely as a conducting material in the fabrication of integrated circuits, and chemical vapor deposition process for Al has been actively investigated for the application in ultra large scale integration. In this review, various precursors, mainly alkyl aluminum and alane compounds, and reaction mechanisms of these precursors in Al CVI) are described. Epitaxial growth and selectivity of the deposition are also discussed. In addition to thermal reactions, plasma and photochemical reactions are also briefly described.