Nucleate Pool Boiling of Pure Liquids and Binary Mixtures：PartI－Analytical Model for Boiling Heat Transfer of Pure Liquids on Smooth Tubes

ＮｕｃｌｅａｔｅＰｏｏｌＢｏｉｌｉｎｇｏｆＰｕｒｅＬｉｑｕｉｄｓａｎｄＢｉｎａｒｙＭｉｘｔｕｒｅｓ：ＰａｒｔＩ－ＡｎａｌｙｔｉｃａｌＭｏｄｅｌｆｏｒＢｏｉｌｉｎｇＨｅａｔＴｒａｎｓｆｅｒｏｆＰｕｒｅＬｉｑｕｉｄｓｏｎＳｍｏｏｔｈＴｕｂｅｓＧｕｏｑｉｎ...     

重Fermi子体系反常比热的理论研究

利用文献中Ｋｏｎｄｏ格子理论模型，研究了重Ｆｅｒｍｉ子体系比热与温度的反常关系。     

用红外热象技术研究有凸台热源倾斜板的散热

本文介绍红外热象技术在工程热物理研究中某些应用的探索。作为实例，通过热象技术，实验研究了具有水平凸台离散热源的倾斜板的散热，在研究它的自然对流换热部份结合利用激光全息干涉技术。此间着重于分析倾斜角对散热的影响。     

热流法计算高温炉内辐射传热

高温炉内的辐射传热是工业生产中常遇到的问题。过去，人们在应用热流法计算辐射传热时遇到了一定的困难，使计算结果与实际有一定的偏差。本文运用文献［１］中给出的新热流数学模型，开发出由新热流方程与能量方程相耦合的计算机程序，其中的比热流参数由线加热热源情况下计算得到。用该程序计算了实验室用马弗炉内的温度场，并且用热电偶实测了炉内的一些温度值，理论计算与实测值符合很好。     

Spray forming: Science and technology

Spray forming involves sequential gas atomization of a melt into a spray of fine droplets and their deposition on a substrate to build up a high-density preform. The rapid solidification inherent in spray deposition generates refined, equiaxed and low segregation microstructures. A number of promising features of this near-net shape manufacturing process are highlighted and compared, wherever possible, with the conventional casting and PM techniques. Some commercial nozzles used to create spray and mechanisms associated with spray generation are described. The consolidation of the droplets and the development of the microstructure in the deposit are primarily governed by the nature of the spray and the thermal state of droplets on the deposition surface. Several microstructural characteristics of the deposit are presented and their origin in spray deposition is discussed.     

用电子自旋共振研究导热油的热稳定性

用电子自旋共振对国内几种典型合成油，基础油及加有添加剂的基础油，分别在不同温度下测定生成自由基的相对浓度，以及一定温度下放置一段时间自由基衰减情况，来考察导热油的热稳定性。     

Thermal design method of bayonet-tube evaporators and condensers

The paper describes an effectiveness-NTU design method of bayonet-tube evaporators and condensers. Including the effect of the wall superheat on the shell-side film coefficient, and using an energy balance on the tube, differential equations for the steady-state fluid temperatures are formulated. Because of the nonlinear nature of the governing equations, the fourth-order Runge-Kutta method is employed to the solution of the finite difference equations. The results are iterated with the combination of integration techniques. An upper bound to the numerical error being ±5% the fluid temperature distribution as well as the exchanger effectiveness are determined, and presented as a function of the Hurd number, the number of heat transfer units and the flow arrangement. For flow entering through the inner tube, the temperature distribution displays the occurrence of a minimum at a point other than the tube-tip of the exchanger. In an extension of the analysis, an effort is made to illustrate the deviation of the results obtained by uniform film coefficient from the present study, and the differences are outlined.     

基底元素表面富集与扩散阻档层

根据An－Ag系统以及An－Cu系统的扩散系数计算，提出了扩散阻挡层模型。利用这个模型对Au－Ag系统进行有关实验，得利了较好的验证。     

Impact of uncertainties on estimations of heat pump cycle performance

Sensitivity analysis is used to show how uncertainties in basic factors, such as heat transfer, pressure drop, compressor efficiency, and thermophysical properties, influence the result of heat pump cycle performance estimations. By comparing the results of this analysis with uncertainty levels of estimations and experimental determinations, it is established to what extent improvements in accuracy are needed. The investigation was carried out for several different applications and, as working fluids, both pure substances and non-azeotropic mixtures were examined. It was found that evaporation heat transfer and compressor efficiency are two areas where improvements are needed. It is also shown that estimates using very accurate, substance-specific, equations of state differ from those using more general types by up to 1 % for COP and 2% for capacity.     

快速凝固高碳铁基合金脉冲激光非平衡热处理

利用脉冲Ｎｄ：ＹＡＧ激光辐照对快速凝固高碳铁基合金进行非平衡相变热处理，发现在高能脉冲激光辐照时，原快速凝固共晶碳化物（Ｆｅ３Ｃ）异常迅速地石墨化，获得了含超细石墨球和既含超细石墨球又含快速凝固共晶Ｆｅ３Ｃ的两种新材料，研究表明，这种快速石墨化及上述两类新型材料的形成主要归因于脉冲激光光速辐照产生强烈周期性起伏温度场的“微退火（ｍｉｃｒｏ－ａｎｎｅａｌｉｎｇ）效应。