改性丙-叔共聚乳液在天然石漆生产中的应用

以丙烯酸酯-叔碳酸乙烯酯共聚乳液为基料生产的天然石漆，具有形象逼真、不褪色、耐水耐碱性好、抗紫外线辐射性强等特点。     

稀土复合热稳定剂对聚氯乙烯性能影响研究

主要以有机锡热稳定剂为对比物，研究了稀土热稳定剂对聚氯乙烯(PVC)的热稳定性及其他性能的影响。稀土热稳定剂对PVC的力学性能、加工性能都有不同程度的提高，稀土热稳定剂的热稳定性能符合PVC的加工条件要求，并研究了抗冲改性剂ACR(丙烯酸酯共聚物)对体系的影响。     

聚硅氧烷-丙烯酸酯共聚物互改性产物的表面特性

通过测定参照液体在固体表面的接触角，计算固体的表面能及固体／液体接触体系的粘附功，考查了聚硅氧烷-丙烯酸酯共聚物互改性产物的表面特性及其对粘接性能影响。     

Thickness and composition dependence of the glass transition temperature in thin random copolymer films

Glass transition temperatures (T_g) of thin poly(styrene-co-methyl methacrylate) and poly(2-vinyl pyridine-co-styrene) films coated on a native oxide surface of Si wafer (100) were measured by ellipsometry. The thickness dependence of T_g can be properly fitted by previously suggested equation developed for homopolymers, based upon a continuous multi-layer model, although one component in thin random copolymer films demonstrates a slightly favorable interaction between a substrate and thin film, and another demonstrates a strongly favorable interaction. Surface and interface have a strong influence on T_g of thin film coated on substrate: the surface has the effect of reducing T_g, whereas the interface increases the T_g according to the degree of interaction between a substrate and thin film. This degree of interaction can be quantified as an interaction parameter (k), and is dependent on the composition of random copolymers. For the estimation of k values of thin random copolymer films, we proposed a parallel type additive function (1/k_ran=w₁/k₁+w₂/k₂) where w is a weight fraction of component.     

Surface modification of tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) by plasmas for copper metallization

Tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) sheet surfaces were modified with argon, helium, oxygen, and hydrogen plasmas. How the four plasmas modified the PFA sheet surfaces was investigated. All plasmas modified the PFA surfaces and at the same time initiated degradation of the PFA polymer chains. The balance between modification and degradation was strongly influenced by the magnitude of the discharge current in the plasmas. Efficiency of the plasmas in modification was hydrogen plasma > oxygen plasma > argon plasma > helium plasma. The modification involved defluorination of CF₂ carbons into CHF and CH₂ carbons and oxidation into O? CH₂, O? CHF, and O? CF₂ groups. The surface‐modification technique (a combination of hydrogen plasma treatment and silane coupling treatment) proposed in this study was applied for copper metallization of the PFA surface. The utility of the technique was confirmed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1087–1097, 2002     

HIPS/EVA/CB体系的相容性

研究了炭黑(CB)对高抗冲聚苯乙烯(HIPS)/乙烯-乙酸乙烯酯共聚物(EVA)共混体系相容性的影响,并预测了共混体系的相形态转变点。填充CB后,当EVA用量大于50 phr时,碳氧双键伸缩振动峰的位置由1 737.9cm~(-1)偏移到1 706.5 cm~(-1)附近,且在1 240.0 cm~(-1)附近的碳氧单键峰减弱,近乎消失。采用半经验公式对共混体系进行理论预测,HIPS/EVA/CB共混体系理论上发生相形态转变时,HIPS的临界质量分数为50%～60%,经傅里叶变换红外光谱和扫描电子显微镜照片分析,共混体系发生相形态转变时,HIPS的质量分数约为42%。     

乙烯-辛烯共聚物/再生丁基橡胶热塑性弹性体的制备及其性能

采用动态硫化法制备了乙烯-辛烯共聚物(POE)/再生丁基橡胶(RIIR)热塑性弹性体(TPE),考察了共混比、硫黄、软化剂白油和炭黑N330对TPE力学性能的影响,研究了TPE的动态力学性能和流变性能。结果表明,当POE/RIIR(质量比)为2/1、硫黄为0.5份、软化剂白油为20份、炭黑为30份时,TPE的综合力学性能较佳;POE和RIIR具有较好的相容性;当体系中加入白油时,TPE的动态复数黏度(η*)降低,炭黑的加入使TPE的η*迅速增大。     

透明成核剂作用下的聚丙烯共聚物的等温结晶形态

利用偏光显微镜观察了聚丙烯共聚物（CPP）在透明成核剂TM-3作用下的等温结晶形态。结果表明：随结晶时间延长，CPP的球晶尺寸变大，形态也趋于完善；结晶温度并非越高越有利，CPP样品在140℃的结晶形态最好；球晶尺寸随TM-3含量提高而有所减小，但含有TM-3的CPP样品能够形成比CPP本体更大、更完善的球晶。TM-3在CPP结晶过程中提供了少量而有效的晶核，使丙烯链段能够附着在上面进行生长。     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

High resolution solid state 13C n.m.r. of butadiene grafted polypropylene

¹H dipolar decoupled ¹³C n.m.r. experiments with the aid of the magic angle spinning technique have been used to determine the graft content and the isomer content of the polybutadiene grafts in a graft copolymer with isotactic polypropylene.