电力变压器局放超声传感器及其应用

作者研制成一种带光纤的电力变压器局放超声PZT传感器.文中分析了它的灵敏度与宽频带特性,介绍了原理、结构设计、实验数据及现场成功实例.理论与实验研究表明:具有这种高灵敏传感器的超声定位系统是确定电力变压器绝缘故障部位的一种方法.     

超声波处理石油污水的实验研究

考察了在不同空化状态下超声波对石油污水化学耗氧量(COD)的降低作用。探讨了时间、功率、pH值及温度对石油污水化学耗氧量降低作用的影响。结果表明，石油污水化学耗氧量的降低率随着时间增大而增大，随着温度、pH值的增加而减小，随着功率的增加，先增加，然后再减小。     

超声检测技术在坝体/基岩结合面测试中的应用

1998年，由加拿大和中国技术人员分别组成的3个小组对加拿大安大略省Otto Holden大坝的坝体混凝土与基岩结合面进行了测试。文中以这次测试研究为背景，系统介绍了测试的目的、使用的检测技术以及取得的成果，着重介绍了超声检测技术在坝体／基岩结合面测试中的应用。     

超声珩磨在发动机缸套光整加工中的应用研究

本文介绍了发动机缸套的新型加工工艺-功率超声珩磨的原理。特点，装置组成。关键技术，工艺效果以及其应用前景。     

Low Temperature Elastic Constants of Polycrystalline MgB2

We have used a resonant ultrasound spectroscopy technique to measure the bulk and shear modulus of fully dense, polycrystalline MgB₂ between 4 and 300 K. Both moduli show good agreement with published first principle calculations. The internal friction shows a broad maximum around 40 K.     

用超声处理在石墨表面形成梯度孔洞

研究了超声处理对石墨表面状况的影响。超声处理初期，增加超声处理时间使石墨显气孔率增加，表面孔洞数量增多，尺寸变大；超声处理5min后，超声处理时间增加，显气孔率和孔洞状态基本不变。用超声处理能在石墨表面内层附近形成比较理想的梯度分布孔洞。     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

半导体元件清洗技术浅谈

随着社会的进步和科学技术的迅猛发展,对洗净技术的要求也越来越高。清洗方式多种多样,但最主要的是突出在喷射清洗和超声波清洗两大方面,应用于全国各行各业,并且也得到了明显进步。     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

粘接结构超声信号的小波分解与特征提取

粘接结构因其独特的物理、机械和声学特性在诸多领域具有非常广泛的应用，对于铝合金-橡胶这样一种金属-非金属粘接结构的超声检测信号，本文利用了小波变换的多分辨率分析(时频分析)的方法，有效地提取出了反映多层材料粘接状况的信号特征，该特征提取方法可用在粘接结构的无损检测中。