反式-1,4-聚异戊二烯的氯化改性

采用水相悬浮法，在常压下对反式-1，4-聚异戊二烯（TPI）进行氯化改性。研究了温度、时间、粒径等对氯化反式-1，4-聚异戊二烯（CTPI）氯含量的影响。得到适宜的反应条件是：采用两阶段升温的方法，控制一定的通氯量，第一阶段，反应温度为35℃，反应时间为2～3h；第二阶段．反应温度为50～55℃，反应时间为1～6h，可获得氯质量分数在50％以内的CTPI，产品为可溶解的白色疏松颗粒。     

Development of high‐definition aqueous polyvinylpyrrolidone photoresists for cathode ray tubes

Aqueous photoresists that are capable of higher resolutions than are currently employed by the cathode ray tube (CRT) industry were developed by combining photoactivators, which activate at shorter UV wavelengths with polyvinylpyrrolidone (PVP). Two photoactivators were synthesized: 4,4′‐diazido‐2,2′‐biphenyl disodium disulfonate (DABP), which has a maximum absorbance at 264 nm, and 4,4′‐diazido‐2,2′‐biphenylethane disodium disulfonate (DABPE), which has a maximum absorbance at 258 nm. The PVP/DABP and PVP/DABPE photoresists successfully imaged a pattern with resolution as small as 4.4 μm with photoactivator concentrations greater than 20% of the PVP concentration. Addition of silane and emulgen greatly improved the performance of the photoresists with more uniform coatings of thicknesses of up to 1.4 μm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1637–1644, 2006     

对伞花烃裂解氧化产物苯甲酸的水相酯化方法研究

对伞花烃裂解氧化产物苯甲酸与硫酸二甲酯的反应可以采用水相酯化法。实验室小试结果显示,苯甲酸的转化率平均为89.97%,苯甲酸甲酯的得率平均为83.16%;车间放大试验结果显示,苯甲酸甲酯的得率为89.00%。水相酯化法与有机相酯化法相比,甲苯的单耗降低38.69%,硫酸二甲酯的单耗下降32.14%,废水量下降35.85%,耗时减少66.67%,设备利用率和生产能力显著提高,氧化催化剂也可以得到回收。     

喷墨印花用液态活性染料稳定性研究

通过对液态染料溶解性、稳定性、耐水解程度等的测试,综合考察了添加剂的种类及用量对高浓度液态活性艳蓝P-3R性能的影响,结果表明:在所考察的四种有机共溶剂中,N-甲基吡咯烷酮(NMP)的效果最好,且其最佳用量为10%;缓冲溶液中Na2HPO4/NaH2PO4的效果较好,最佳用量为3%.     

沉淀法制备碳酸羟基磷灰石的影响因素

通过沉淀法制各了高碳酸根(CO32-)含量的纳米碳酸羟基磷灰石(nanosized carbonated hydroxyapatite,CHA).研究了合成温度、初始原料碳酸氢钠(NaHCO3)和磷酸氢二铵[(NH4)2HPO4]的摩尔比[n(CO32-)/n(PO43-)]和pH值对CO32-替代的影响.用X射线衍射和透射电镜表征CHA粉体的物相组成和形貌.用碳硫元素分析仪和红外光谱研究了CO32-替代的含量和类型.结果表明:随着合成温度的升高或原料中CO32-浓度的减小,CHA晶粒尺寸和长径比增加;合成CHA中的晶相组成和CO32-含量主要由n(CO32-)/n(PO43-)决定;而CO32-的替代类型则主要取决于n(CO32-)/n(PO43-)和pH值.在高pH值或高n(CO32-)/n(PO43-)的合成条件下,能够获得以B型替代为主的CHA.     

水基(乳液)胶粘剂微生物污染及其罐内防腐效果测试

对广东省部分水基(乳液)胶粘剂生产企业微生物污染的来源和种群进行了调查,建立以微生物攻击挑战性试验来快速判定水基(乳液)胶粘剂罐内防腐效果的评价方法,探索该类胶粘剂微生物污染的有效防治技术。     

Self-emulsifiable soybean oil phosphate ester polyols for low-VOC corrosion resistant coatings

A series of soybean oil phosphate ester polyols (SOPEP) was prepared by reaction of fully epoxidized soybean oil with phosphoric acid and simultanoeous hydrolysis in the presence of a polar solvent. The polyols were characterized by determination of acid value, oxirane number, hydroxyl value, molecular weight (GPC), and FTIR spectra. These polyols with varying amounts of acid phosphate groups could be self-emulsified to form aqueous dispersions after neutralization with organic base. These aqueous dispersion showed varying degrees of stability and their appearance ranged from opaque dispersions to translucent to clear solutions. Waterborne coating compositions were prepared using these aqueous dispersions as principal components and their thermally cured film properties were studied. it was found that by careful selection and formulation, SOPEPs can be successfully used for low-VOC waterborne coating formulations. SOPEPs with 3.5% phosphate ester content showed visibly superior corrosion resistance properties.     

两种异噻唑防腐剂抑菌效果的研究

研究了两种异噻唑衍生物防腐剂的防腐最佳pH值，以及防腐剂对微生物的最低抑制浓度（MIC），确定了在洗洁精中，单一防腐剂的最低用量，对两种防腐剂在洗洁精中的混合使用亦进行了研究。     

单组分聚氨酯乳液制备及其结构与性能研究

采用预聚合法,以聚酯二元醇(PEA)、甲苯二异氰酸酯(TDI)、二羟甲基丙酸(DMPA)为基本原料合成了分子链上带有亲水基团(-COOH)的聚氯酯预聚体。以特殊的水化方式制得聚酯型水性聚氨酯乳液。讨论了温度、-NCO-与-OH的物质的量之比(R)、亲水基团含量、合成工艺分别对材料力学性能、耐水性、玻璃化转变温度(Tg)等的影响。研究发现,采用前中和工艺、在高速搅拦下将预聚物加入到水中的水化方式,当R值为1．2,羧基含量为1．6％时,合成的聚酯型水性聚氨酯乳液具有较好的贮存稳定性,且涂膜的耐水性和力学性能良好。     

双水相萃取技术的研究现状与应用

双水相萃取技术是一种高效温和的新分离技术,在生物制药、分析检测、稀有金属分析等方面均有应用,特别是在生化分离工业中,比传统的萃取方法有着更加明显的技术和条件优势.本文综述了双水相技术的基本原理、应用方向、集成技术、热力学模型等,对双水相技术目前所存在的问题以及发展前景做了简要的论述.