CORDIS无机粘结剂的特性与试验

介绍了德国HA公司最新研制的CORDIS无机粘结剂的组成与性能以及应用中的问题。     

铸造用聚氨酯粘合剂组份Ⅰ酚醛树脂合成研究

铸造用的聚氨酯粘合剂组合物，主要由极性和非极性溶剂溶解的酚醛树脂组份I和非极性溶剂稀释的聚异氰酸酯组份Ⅱ组成。组份Ⅰ酚醛树脂结构、性能是决定该类粘合剂性能因素之一。本文对铸造用聚氨酯粘合剂的组份Ⅰ酚醛树脂结构、合成方法、原料材料选择等问题进行了分析讨论，为铸造用聚氨酯粘合剂的组份Ⅰ的制备和苯醚型酚醛树脂的合成提供一些参考。     

粘结剂组成对粘结剂和喂料热性能的影响

研究制备了PW，BO，OP3大系列10种组成的粘结剂及相应10种W-Ni-Fe粉末与粘结剂的混合料。并采用热失重-差热分析(TGA-DTA)分析了粘结剂和喂料的热性能。研究结果表明，粘结剂组成对粘结剂和喂料的热性能如熔点、热分解温度和热分解曲线有很大的影响。通过此变化可以更为准确地确定不同粘结剂组成的喂料中的粘结剂脱除工艺和脱除方式。     

煤与粘结剂的相互作用和型煤抗压强度的关系

煤的润湿性与型煤抗压强度相关。用于表征煤的润湿性方法有煤与淀粉粘结剂的接触角、粘合功、煤的润湿临界表面张力等。研究证明,随着煤化程度的升高,煤与淀粉粘结剂接触角变小,粘合功增加,粉煤的润湿性改善,型煤抗压强度得以提高。另外,煤的润湿临界表面张力越大,煤的润湿性越好,型煤抗压强度也就越高。     

耐高温绝缘涂层的研制

采用有机硅树脂、无机粘结剂和无机填料制备的有机无机复合耐高温绝缘漆，其涂层经600℃，1h的热处理后可具有良好的附着力和绝缘性能。配套后的绝缘涂层，可在250℃下长期使用，并具有良好的耐冷热循环、耐湿热的能力。     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries

The cycling performance of a silicon/carbon composite anode has been significantly enhanced by using acrylic adhesive and modified acrylic adhesive as binder to fabricate the electrodes for lithium ion batteries. The capacity retentions of Si/C composite electrodes bound by acrylic adhesive and modified acrylic adhesive are 79% and 90% after 50 cycles, respectively. These two binders are electrochemically stable in the organic electrolyte in the working window. They also show larger adhesion strength between the coating and the Cu current collector as well as smaller solvent absorption in the electrolyte solvent than polyvinylidene fluoride (PVDF). Furthermore, sodium carboxyl methyl cellulose (CMC) plays an important role on improving the properties of acrylic adhesive, which increases the adhesive strength of acrylic adhesive and improves the activation of the electrodes.     

纸浆黑液制气化型煤黏结剂研究

利用正交设计法研究纸浆黑液经化学改性制气化型煤黏结剂的工艺技术条件,结果表明:1 000mL纸浆黑液(固体质量分数45%)与80mL有机试剂A在80℃下恒温反应2h,然后升温至95℃,加入30mL有机试剂B,恒温反应1h;最后加入50g无机试剂M,充分搅拌0.5h,得到性能优良的纸浆黑液气化型煤黏结剂。用该黏结剂生产型煤,其抗压强度、落下强度、热稳定性分别为96kg/球、96%、95%,并具有良好的防水性能,完全达到了气化型煤的质量要求。     

二聚脂肪酸在聚酰胺型水性油墨连接料合成中的研究进展

二聚脂肪酸具有特异的分子结构和特性,可生成许多衍生物,其中聚酰胺树脂是最重要的一种,且由聚酰胺树脂所制备的油墨具有良好的溶解性、耐腐蚀性、亲水性等优良性能。本文主要介绍了二聚酸基聚酰胺树脂的特性,及其在油墨连接料合成中的应用研究,并展望了其发展前景。     

莫来石纤维多孔陶瓷的制备与性能

对纤维多孔陶瓷的制备及性能进行了研究。在制备纤维多孔陶瓷时,采用酸性磷酸铝A23(P/Al原子比为2 3)作粘结剂,所制备的多孔陶瓷在各方面都具有优良的性能。如导热系数λ(22℃)为0.0529W/m.℃、热膨胀系数α为4.75×10-6/℃、孔隙率为96.22%、容重为0.1142 g/cm3等。在环保、节能领域具有广泛的应用前景和重要的社会及经济意义。