钢管减阻型内涂层生产工艺及设备

介绍了钢管减阻型内涂层技术的生产工艺和主要设备，给出了内涂层生产线典型的工艺布置，并对主要设备的组成及工作原理进行了介绍。     

注入氮离子的SiC涂层阻氢性能研究

利用离子束混合－离子注入（Ar^ ）和磁控溅射相结合的实验技术在HR－1不锈钢基体上制备了注入N^ 的SiC涂层，并用表面分析手段对所制备涂层的表面形貌，剖面形貌、相结构，表面成分，表面元素的化学态进行了分析，结果表明：制备的涂层结构致密，表面平整、膜层成分均匀；涂层与基体之间形成了一明显的过渡层，增强了涂层和基体之间的结合力，用二次离子质谱（SIMS）对充氘涂层的阻氢性能进行了定性分析，结果表明，涂层元素与氢形成稳定的化学键，抑制了氢的扩散和迁移，使得涂层具有一定的阻氢能力。     

低碳钢热浸Zn-0.15%Ni合金镀层组织及第二相粒子

采用热浸Zn-Ni合金镀锌方法，在含0.03%-0.36%Si的低碳钢上获得Zn-Ni合金镀层，研究了镀浴中Ni含量和钢中Si含量对镀层中δ相和ζ相生长速率的影响，以及Zn-Ni合金镀层η相中的第二相粒子即Zn-Fe-Ni三元化合物Γ2相粒子的形成和长大过程，结果表明，在Zn-0.15%Ni镀浴中，含硅0.03%-0.215%钢镀层的ζ相明显受到抑制，δ相厚度略有增加，Γ2相粒子的形成和长大过程包括ζ相的溶解，Γ2相的形核和成比例吸收铁，镍而长大。     

A study on microstructure and properties of calcium phosphate coatings processed using ion beam assisted deposition on heated substrates

In this study a set of thin Hydroxyapatite (HA) [Ca₁₀(PO₄)₆(OH)₂] coatings was deposited on heated silicon and titanium substrates using Ion Beam Assisted Deposition (IBAD). The effects of substrate temperature and processing parameters on the microstructural properties and composition of the coatings are being studied. Analytical techniques include transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) with an energy dispersive X-ray spectroscopy (EDS), as well as scanning electron microscopy (SEM) with EDX, X-ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). The current results indicate that as substrate temperature increases the Ca/P ratio of the coatings both on titanium and silicon substrates increases. The crystallinity of the coatings and the number of calcium phosphate compounds within the coating including HA also increases. STEM-EDS revealed an atomically diffused intermediate layer at the interface between the coating and substrate. XRD results along with TEM selected area diffraction (SAD) revealed that the coatings are composed of HA, other calcium phosphate, and calcium oxide compounds.     

耐火纤维喷涂技术的优越性及应用

详细介绍了耐火纤维喷涂技术及施工等各方面的优越性。同时说明耐火纤维喷涂技术,在大庆石化公司炼油厂润滑油白土装置扩建改造中加热炉炉衬上的应用及取得的明显节能效果。     

Effect of Thickness on the Structure and Tribological Properties of MoSx Coating

MoSx coatings were prepared by bipolar-pulse DC unbalanced magnetron-sputtering system with the variation of coating thickness at different Ar pressures.The composition and surface morphology were determined by using energy dispersive X-ray and scanning electron microscopy;the structural characterization was analyzed by X-ray diffraction.The friction and wear properties were investigated by fretting tests in air with less than 10% and 50% relative humidity.At 0.40 Pa pressure,(002) basal plane orientation was formed throughout the coatings.At 0.88 Pa and 1.60 Pa pressures,(002) basal plane orientation was only noticed in the first stage of coating growth(around 0.20 μm in thickness), and then edge orientations with their basal planes perpendicular to the surface would be evolved in the coatings.Humidity has a minor influence on the coatings that have(002) basal plane orientation,whereas the tribological properties of MoSx coatings with edge orientations are greatly affected by humidity.The mechanisms of coating growth and friction and wear processes are discussed.     

自蔓延高温合成表面涂层技术进展

介绍了自蔓延高温合成技术用于表面涂层的SHS熔铸涂层、SHS气相传输涂层、SHS铸渗涂层、SHS烧结涂层、SHS喷射沉积涂层和自反应涂层技术的原理、应用和发展 ,并指出了存在的问题     

关于彩涂压型钢板构件设计中的选材问题

近年来 ,在彩涂压型钢板构件设计应用中 ,由于不重视、不了解如何合理选材 ,在实际工程的材料订货中也都不提出对材料性能的技术要求 ,致使供货材质、材性不能满足使用要求 ,存在降低彩板构件承载力或减少其使用寿命的隐患 ,应引起设计人员的注意。同时对当前如何按使用条件及材料供应条件合理地选定彩板材料的性能技术要求 ,包括基板钢材的级别及力学性能、板厚及公差控制要求、镀锌层质量与彩涂层类别以及参照的技术标准等 ,提出了一些建议 ,供设计应用参考。最后还对板的强度、厚度以及镀铝锌板的选用问题进行了讨论     

化工防腐蚀涂料应用情况介绍

介绍了氯磺化聚乙烯涂料、改性聚苯乙烯涂料、环氧树脂类涂料、水冷器涂料、抗静电涂料等涂料的性能、用途和在洞庭氮肥厂的使用情况.同时对几种涂料施工方案进行了比较.     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。