Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

小浪底水库坝前漏斗区泥沙测验分析

小浪底水库坝前漏斗区的形成和发展,直接影响到枢纽建筑物的安全运行。为了保持塔前“门前清,”掌握坝前漏斗区的形成和发展,保证水库进入拦沙后期和正常运用期的正常运用,对坝前漏斗区进行了泥沙测验分析。结果表明:目前漏斗区范围内纵向坡度较缓,尚没有明显的漏斗形成,仅在坝前和塔前200m×1000m范围形成了漏斗雏形。     

供应链环境下的性能评价系统研究

在竞争全球化的趋势下，供应链管理越来越受到企业重视，供应链性能评价系统(supply Chain Performance Mea-surement System,SCPMS)是供应链管理的关键组成部分，然而企业却不愿意或没有能力建立有效的性能评价系统。总结了供应链性能评价的定义、发展过程及难点，在此基础上提供了一套供应链性能评价的方法，为企业快速建立集成供应链性能评价系统提供借鉴。     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

含杂质流体的流量测量

结合工程实例.介绍了几种实用的含杂质流体的流量测量方案,供自动化仪表设计及维堆护人员参考。     

电阻式电压传感器结构设计及误差特性研究

从路的角度分析了电阻式电压传感器的误差特性 ,从场的角度比较了几种结构方案的幅值误差、相角误差及最大场强 ,优化出最佳方案 ,并分析了该方案幅值误差的频率特性     

Constructing a short form of the Smoking Consequences Questionnaire with adolescents and young adults.

The goal of the present studies was to construct and validate a short form of the 50-item Smoking Consequences Questionnaire (SCQ; T. H. Brandon & T. B. Baker, 1991), a measure of smoking outcome expectancies. In Study 1, a 21-item short form (S-SCQ) was derived from a sample of 107 young adults previously treated for substance abuse. In Study 2, the measure was cross-validated on 125 adolescents in treatment for substance abuse. Confirmatory factor analyses revealed good model fit and factorial invariance for the 4 S-SCQ subscales across both samples. Validation analyses on each sample found that subscale scores generally correlated significantly with smoking-related variables. The present studies provide initial evidence for the utility of the S-SCQ when used with young adults and adolescents. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

液体浓度光波导测量方法研究

对测量液体浓度用的各种不同形状的大直径玻璃光波导进行了研究，理论计算了其测量灵敏度与弯曲半径的关系，并建立了近红外的测试系统，对各种弯曲的光波导进行了测量，得到与理论分析相近的结果。     

压力传感器静态检定装置的测量不确定度

本文根据压力传感器（静态）国家计量检定规程，对压力传感器静态检定装置进行误差分析，得出该装置的测量不确定度。最后，通过实例说明实际测量不确定度与理论分析相符合。