低松装密度水雾化铜粉工艺的研究

本文研究了氧化 还原法生产铜粉的新工艺 ,该工艺是通过氧化还原将水雾化铜粉加以表面改性 ,形成海绵状的粉末 ,显著降低水雾化铜粉的松装密度 ,这种铜粉既具有电解铜粉低的松装密度 ,又具有水雾化铜粉高的流动性。讨论了氧化时间、氧化温度对铜粉松装密度的影响。本工艺是一种新型环保、节能、可替代电解法生产铜粉的先进工艺     

改性Raney Cu催化一乙醇胺脱氢合成甘氨酸

一乙醇胺在氢氧化钠的水溶液中〔w(NaOH)=12%～18%〕,用含有铬和锗等贵金属改性的RaneyCu催化剂脱氢合成甘氨酸。反应温度150～180℃,反应压力0 8～1 2MPa,反应时间2～4h。实验结果表明:改性RaneyCu催化剂比普通RaneyCu有更好的活性和使用寿命,使一乙醇胺的平均转化率从92%提高到97%,有效使用寿命(一乙醇胺的转化率≥90%)从5次延长到15次以上。     

Ideally selective diisocyanate building blocks: New perspectives for dendrimers and coating binders

Using zirconium (IV) salts as catalyst, the reaction of a diisocyanate carrying one tertiary and one primary isocyanate group (IMCI, DIMP) with alcohols can be conducted with complete regioselectivity. This unique selectivity enables the use of a diisocyanate building block in unprecedented ways. Incomplete regioselectivity of diisocyanates, as commonly encountered in currently commercial ones like IPDI and TDI, inevitably leads to polydisperse products in reaction with polyols. The ultimate monodisperse polymer architecture, dendrimers, can now be made in a facile, straightforward manner using IMCI as the ideal diisocyanate building block. Coating applications of this unique building block are not restricted to these perfect branching polymers, but also include isocyanate-functional coating resins. Without any increase in polydispersity, a hydroxyl-functional polyester can be end-capped with the IMCI diisocyanate and subsequently serve as a crosslinker in powder coatings.     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

Surface structural change of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode materials at elevated temperatures

LiNi_0.5Mn_1.5O₄ powder was synthesized via sol-gel method and coated with ZnO in order to test the electrochemical cyclability of the material as a cathode for the secondary Li battery in the 5 V range at 55 °C. The ZnO-coated LiNi_0.5Mn_1.5O₄ powder nearly maintained its initial capacity of 137 mA h g⁻¹ after 50 cycles whereas the uncoated powder was able to retain no more than 10% of the initial capacity after 30 cycles. TEM analysis of the cycled cathodes suggests that the formation of the graphitic surface phase, hindering the Li migration, may be responsible for the rapid capacity loss of the uncoated material while no such phase was observed on the surface of the ZnO coated LiNi_0.5Mn_1.5O₄ powder.     

埋地管道三层PE外覆盖层及其检测方法研究

文章介绍了埋地管道三层PE外覆盖层系统的构造参数和性能特点,论述了两种用于埋地钢质管道外覆盖层状况检测的方法,一种是多频管中电流法,另一种是DCVG/CIPS组合检测技术。分别介绍了两种方法的工作原理、操作方法和设备,并结合工程实例进行了说明。这些方法和设备可分别或同时用于管道不开挖检测防腐层破损点的位置以及漏点大小。     

对ADSL接入方式铜缆可用线对率的分析

指出了为发展ADSL而提高市话音频铜线电缆的传输质量和维护水平的必要性,分析了铜线电缆线对有关指标参数低劣的原因和对传输ADSL的影响,并提出了一些改进的意见。     

纳米涂层的研究现状与展望

简述了纳米表面涂层制备工艺的研究现状，分析了气相沉积、热喷涂、电刷镀、化学镀和电沉积等不同工艺在制备纳米表面层中的应用情况。介绍了纳米涂层在超硬耐磨、耐腐蚀、耐高温热稳定性等方面研究的新进展，并对纳米涂层的应用范围和领域作了展望。     

空调器用风冷冷凝器换热能力实验研究

实验测定了几种不同铜管、肋片组合的冷凝器在不同的风量和风机转速下的换热量，发现采用内螺纹铜管和迎风侧平片、背风侧冲缝片的冷凝器具有最优的换热性能。分析了多流路冷凝器中不同流路之间的制冷剂分配不均匀性和再热现象。     

铜在高纯净钢中析出过程的观察

利用透射电子显微镜观察了铜在高纯净钢中的析出过程，发现早期析出阶段有类B2结构的亚稳相出现，分析了铜在高纯净钢中的析出贯序，研究结果对分析铜在高纯净钢中的时效强化机理具有重要意义。