ArF准分子激光立方氮化硼薄膜的制备

采用ＡｒＦ准分子脉冲激光沉积方法（ＰＬＤ），以六方氮化硼（ｈ－ＢＮ）作靶在Ｓｉ（１００）衬底上制备氮化硼薄膜。ＸＲＤ及ＦＴＩＲ透射谱测量表明生成的氮化硼薄膜是含有少量六方氮化硼结构的立方氮化硼（Ｃ－ＢＮ）．ＡＥＳ测量表明不同条件下生成的薄膜中Ｎ与Ｂ的相对含量是不同的，最大比例近乎为１：１，薄膜的维氏显微硬度ＨＶ最大值为１５８０ｋｇ／ｍｍ２。     

Tb0.3Dy0.7(Fe1-xAlx)1.95合金的结构、磁致伸缩性能和自旋重取向研究

本文系统研究了室温下Tb0.3Dy0.7(Fe1-xAlx)1.95(x=0,0.05,0.1,0.15,0.2,0.25,0.3,0.35)合金中金属Al替代Fe对晶体结构、磁致伸缩、内禀磁致伸缩、各向异性和自旋重取向的影响.结果发现,x＜0.4时,Tb0.3Dy0.7(Fe1-xAlx)1.95完全保持MgCl2立方Laves相结构,晶格常数a随Al含量x的增加而增大.磁致伸缩测量发现,随着替代量x的增多磁致伸缩减小,x＞0.15时超磁致伸缩效应消失;x＜0.15时磁致伸缩在低场下(H≤40kA/m)有小幅增加,高场下迅速减小,而且易趋于饱和,说明添加少量Al有助于减小磁晶各向异性.内禀磁致伸缩λ111随[111]替代量x的增加大幅度降低.穆斯堡尔效应表明,Tb0.3Dy0.7(Fe1-xAlx)1.95合金的易磁化方向随成份和温度在{110}面逐渐偏离了立方晶体的主对称轴,即自旋重取向.室温下,当x=0.15时,Tb0.3Dy0.7(Fe1-xAlx)1.95合金中出现了少量非磁性相;x＞0.15时,合金完全呈顺磁性.     

Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method

The crystal plasticity was implemented in the finite element method（FEM） software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function（ODF）. The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain--stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries.     

超硬材料合成方法、结构性能、应用及发展现状

为了对超硬材料有更深入的了解,对以金刚石和立方氮化硼为主的超硬材料的合成方法、发展历程、结构与性能及应用领域进行了综述。金刚石的合成方法主要有静压触媒高压高温法、化学气相沉积法、动压爆炸法或爆轰法。经过几十年的发展,我国超硬材料制造技术和装备已经处于国际先进水平。超硬材料除了硬度高之外,还有许多优良的物理力学和化学性能,广泛应用于磨具、刀具、锯切、钻进等超硬材料工具和新型功能材料。     

Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

立方形纳米碳酸钙的工业制备

介绍了工业制备高品质立方形纳米碳酸钙普遍适用的工艺路线及化学原理，提出了新的碳化反应模型、速率方程和晶体形貌控制理论，并讨论了生产过程中影响碳酸钙粒径的各种因素。     

三次样条构造的伪逆解法

为了提高三次样条构造的可行性, 基于矩阵的伪逆方法, 提出一种不依赖额外约束条件的三次样条构造的伪逆解法。该解法通过求解出三次样条二阶导数的最小范数解, 从而较好地构造出三次样条函数。理论分析及数值实验结果表明该三次样条构造的伪逆解法具有简单、有效等特点。综合分析各种构造解法的性质, 对各种三次样条构造解法进行归类比较, 为在实际工程计算应用中选择合适的三次样条构造解法提供了指导方向。     

基于粒子群三次样条优化的图像边缘描述算法

针对手工选点生成的三次样条曲线无法准确地描述图像边缘的问题,以粒子群三次参数样条曲线优化算法为基础对现有的图像边缘算法进行了改进。在图像边缘上取若干点作为样条曲线的型值点,利用粒子群算法对这些型值点进行优化,使得到的样条曲线对图像边缘有很好的贴合。实验表明,该算法不仅能够快速拟合样条曲线,而且优化后的样条曲线形态能较好地贴合图像边缘轮廓。     

凸轮磨恒线速加工过程曲线优化

为了提高凸轮轴的加工效率和加工精度,开发可用于凸轮轴磨削修整系统的动态优化模块。根据凸轮轴恒线速磨削原理,在Matlab中完成了数学模型的建模,采用三次样条曲线拟合插值法对加工过程曲线进行了优化,从而得到了波动更小的速度曲线并减少了恒线速度磨削所引起的联动轴响应问题。实验表明,该方法很好地实现了在二次磨削中对凸轮轴表面轮廓的修整,提高了凸轮轴的表面质量。     

基于三次样条插值的亚像素边缘检测方法

为了实现图像边缘的亚像素定位,针对阶跃形式的边缘类型,提出了一种基于三次样条插值的亚像素边缘检测算法,根据样条插值原理,获得一维边缘的连续灰度分布,通过计算边缘点两侧三次样条函数的二阶导数为零点,实现一维边缘点的亚像素定位;利用一维曲面拟合方法,获得边缘投影方向,根据一维曲面投影方向像素灰度不变理论,利用投影公式将数字窗口中所有三维点投影到相同的投影平面,从而可将二维边缘检测问题转化为一维边缘检测,利用一维边缘检测方法获得边缘点位置,结合投影方向,最终实现二维边缘定位。通过与现有亚像素边缘检测方法的比较,可知算法对噪声具有较好的鲁棒性,同时计算时间相对较快,因此在实际应用中具有较好的适用性。