可拓市场的类型与实现方式研究

根据可拓市场的概念，探讨了在不同可拓变换下可拓市场的类型及实现可拓市场的方式。这些研究为企业开拓市场提供了有效的形式化方法。     

Assessment of different techniques for quantification of α-Al(FeMn)Si and β-AlFeSi intermetallics in AA 6xxx alloys

During homogenisation of AA 6xxx aluminium alloys, the platelike β-AlFeSi intermetallic phase will transform to a less Si-rich and more spheroidised α-Al(FeMn)Si phase which is more favourable for extrusion. In this study, several quantitative methods, which determine the relative volume fraction of α-Al(FeMn)Si and β-AlFeSi, are compared and an assessment of each method is made. The methods used are optical microscopy, scanning electron microscopy (SEM) in combination with electron dispersive X-ray (EDX) using polished samples, and X-ray diffraction (XRD) on intermetallics, extracted through selective dissolution of the Al matrix. The highest accuracy is obtained by using SEM/EDX analysis and applying two criteria.     

X射线衍射线形Fourier变换

采用计算机辅助实验技术，研究X射线衍射线开在仪器宽化修正过程中Fourier系数变化的规律及其影响，结果表明，只要实测线形接近Gauss 分布，Fourier变换就会导致弯勾效应；Forier变换可引起真实线形的尾部波动及大于实际值的宽化，引入边界条件可予以消除，Kα双线形经过Fourier变换后，Fourier纱数与真实Fourier系数存在着一定的差异。通过真实线形的Fourier变换可以修正。     

长输管道过水面护底的优化设计

长输管道穿越河流时,在河道水流的冲刷下,原来敷设于河床下一定深度的管道有可能暴露漂管,甚至在水流裹携的块状物的撞击作用下,还会发生断管之类的重大事故。为防止河床持续下切造成管道事故,一般对穿越河流的长输管道采取护底措施进行防护。文章根据水力学明渠均匀流理论及相关计算公式,介绍了天然河道的流速计算方法,从水流的裹携能力入手,依据不同地质河床和过水面的抗冲流速,确定相应的过水面护底方案,该计算方法简便,能适应现场设计的需要。     

小型水电站计算机监控系统的设计与设备选择

在对一些小型水电站的考察与调研的基础上，对小型水电站计算机监控系统实施现状和普遍存在的问题进行了分析，并提出了解决的方法。建议小型水电站监控系统的设计要强调简单可靠和实用的原则，采用性价比高的实用新技术。可供有关专业人员参考。     

离心式空压机轴承技术改造

针对离心式空压机各级轴振动值超标的现象进行技术攻关,解决了制约装置安全平稳生产的瓶颈问题。     

长输管道不停输防腐层大修技术

东河塘至轮南输油管道,经过12年的运行,钢管外石油沥青玻璃布防腐层已严重老化甚至剥离。在不停输的情况下,对输油管道防腐层大修,特别像东—轮线输油管道,地处沙漠边缘、戈壁地带,没有成熟的施工经验可以借鉴。文章根据东—轮线输油管道防腐层大修的施工实践,详细介绍了长输管道不停输防腐层大修的施工工艺和质量保证措施。     

强化技改决策促进技术进步和企业发展

以有效的技改投资决策理念指导企业技改投资，加快了企业技术进步，促进了企业跨越式发展，使三钢的产能从1996年年产钢50万t钢规模发展到目前的200万t钢水平，且优化了产业结构，技术经济指标从全国同行业的中下游上升到领先水平，增强了企业实力。但是，在取得显著成绩的同时，周边民营钢铁企业异军突起，面对严峻的挑战，三钢力争两年内依靠技改使产能达到300万t钢规模，并筹谋更远大的发展。     

Effect-Size Indices for Dichotomized Outcomes in Meta-Analysis.

It is very common to find meta-analyses in which some of the studies compare 2 groups on continuous dependent variables and others compare groups on dichotomized variables. Integrating all of them in a meta-analysis requires an effect-size index in the same metric that can be applied to both types of outcomes. In this article, the performance in terms of bias and sampling variance of 7 different effect-size indices for estimating the population standardized mean difference from a 2 × 2 table is examined by Monte Carlo simulation, assuming normal and nonnormal distributions. The results show good performance for 2 indices, one based on the probit transformation and the other based on the logistic distribution. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Use of a neural network to link AFM etch patterns to plasma parameters

Plasmas play a critical role in depositing thin films or etching fine patterns while manufacturing integrated circuits. A new model for plasma diagnosis is presented. This was accomplished by linking atomic force microscopy (AFM) to plasma parameters using a neural network. Experimental AFM data were collected during the etching of silicon oxynitride films in C₂F₆ inductively coupled plasma. Surface roughness of etched patterns was characterized by means of discrete wavelet transformation. This led to the construction of three vertical (type I), diagonal (type II), and horizontal (type III) wavelet coefficient-based models. The performance of diagnosis models was evaluated in terms of the prediction and recognition accuracies. Both accuracies were optimized as a function of the number of hidden neurons. Comparisons revealed that the type I model yielded the largest recognition and the smallest prediction error. This was demonstrated even under stricter monitoring conditions. More improved diagnosis is expected by enhancing AFM resolution.