宁波溪口抽水蓄能电站下库面板堆石坝观测资料分析

溪口蓄能电站下库面板堆石坝最大坝高44.5m,施工期间布置的原型观测项目有坝体内部沉降和水平位移、周边缝和板间缝位移、面板应变以及坝基孔隙水压力。根据观测仪器自埋设至2000年的观测资料,文中分析了各项观测物理量的变化规律和变化趋势,综合评价了大坝的工作性态。     

有限元法应用于微波和光波器件的问题和发展

本文就有限元法应用于微波和光波器件的原理、问题和最新进展作了综合评述。文中讨论了适用于不同问题的变分公式的意义；着重讨论了避免和消除虚模的方法和处理开放边界的技术；还对代表该领域发展趋势的三个方面，即边棱元法。非线性结构及有限元程序的前后处理问题进行了评论和展望。     

高瓦斯矿井复合顶板炮采工作面瓦斯治理

结合该矿采煤工作面实际情况,阐述了高瓦斯矿井复合顶板炮采工作面的关键技术处理措施,保证了煤炭的安全生产。解决了高瓦斯矿井复合顶板炮采工作面瓦斯治理难的问题。     

卫星编队飞行中的队形设计研究

目前关于卫星编队飞行的研究有显著的增加。多颗从属卫星(从星)在近距离内与主卫星(主星)组成特定的队形以完成相应的任务,是卫星编队飞行的特点及潜在优势。卫星在编队飞行时,其队形定义为以各颗卫星质心为顶点所构成的几何形状,而队形设计则是根据队形的几何形状求出各卫星的轨道根数(其中主星的轨道根数可以根据任务的要求事先确定)。基于相对轨道根数法,根据卫星相对运动方程,提出了“自然队形”的概念及队形设计的一般方法,并给出了具体的例子。     

A numerical model for induction heating processes coupling electromagnetism and thermomechanics

This paper presents a mathematical and numerical model developed for coupling the various physical phenomena (electromagnetic, thermal and mechanical) taking place in axisymmetrical induction heating processes. All three electromagnetic, thermal and mechanical models are time dependent and take full account of the electromagnetic and thermal non‐linear effect especially with magnetic materials. The electromagnetic problem is discretized and solved in the workpiece, air and inductors. The heat transfer equation and the mechanical equilibrium equations are solved in the workpiece only, both using a finite element method. The mechanical model can take into account thermoelastic–plastic behaviour for the part. The model has been successfully applied to several cases of induction heating. Comparisons between numerical and experimental results show an excellent agreement. Copyright © 2003 John Wiley & Sons, Ltd.     

水布垭混凝土面板堆石坝填筑料开采爆破试验

清江水布垭混凝土面板堆石坝坝高237.0 m,是世界上最高的混凝土面板堆石坝.为了满足设计对填筑料提出的严格的级配要求,在大坝填筑前针对ⅢA、ⅢB、ⅢD填筑料进行了大规模的生产性爆破试验,以确定合适的各种料的爆破参数.简要介绍了试验的成果和初步分析结论,探讨了爆破参数的选择、爆破效果的预测等.     

Trace element evaporation during coal gasification based on a thermodynamic equilibrium calculation approach

Thermodynamic equilibrium calculations using the HSC-Chemistry program were performed to determine the distribution and mode of occurrence of potentially toxic and corrosive trace elements in gases from coal gasification processes. The influence of temperature, pressure and gas atmospheres on equilibrium composition was evaluated. In these reducing conditions, the behaviour of the trace elements is complex, but some form of organization can be attempted. Elements were classified into three groups. Group A includes those elements that, according to thermodynamic data at equilibrium, could probably be condensed in coal gasification. Mn is classified in this group. Group B contains those elements that could be totally or partially in gas phase in gas cleaning conditions, and can be divided into two subgroups, depending on whether the cleaning conditions are hot or cold. Co, Be, Sb, As, Cd, Pb, Zn, Ni, V, Cr are elements in this group. Group C contains those elements that could be totally in gas phase in all the possible conditions, including flue gas emissions. Se, Hg and B are the elements that make up this group.     

金属材料中的稀土元素

本文论述了俄罗斯对稀土元素在高强度钢、高温合金、铝合金、镁合金、粉末冶金和磁性材料中的应用及其发展。     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

Synthesis of p‐aminophenol from the hydrogenation of nitrobenzene over metal–solid acid bifunctional catalyst

BACKGROUND: A single‐step conversion of nitrobenzene (NB) to p‐aminophenol (PAP) through catalytic hydrogenation is a widely used synthesis route for PAP. The main shortcoming of this route is the use of sulfuric acid for rearrangement of the phenylhydroxylamine (PHA) intermediate. In this paper, S₂O₈^2?/ZrO₂ (PSZ) solid acid and Pt‐S₂O₈^2?/ZrO₂ (Pt‐PSZ) bifunctional catalysts were prepared for the synthesis of PAP in non‐acid medium. RESULTS: Calcination temperature has a substantial effect on the acidity, structure and activity for PHA rearrangement of PSZ. The highest PAP yield was 33.8% over PSZ calcined at 823 K when the reaction was carried out in water at 423 K. A high PAP yield of 23.9% was achieved by a single‐step reaction of nitrobenzene over Pt‐PSZ bifunctional catalysts. CONCLUSION: PSZ solid acid exhibits high activity for PHA rearrangement. Perfect tetragonal ZrO₂ and much stronger acid sites play important roles in catalytic activity. Inhibiting the hydrogenation activity by reducing the amount of Pt loading on Pt‐PSZ can improve the competition of PHA rearrangement on acid sites with hydrogenation of PHA on metal active sites, resulting in better selectivity to PAP. Copyright © 2008 Society of Chemical Industry