Diffusion in metallic glasses

Rutherfordα-particles backscattering technique was employed for measurements of diffusion rates in metallic glasses. Effects of relaxation, crystallization and plastic deformation on diffusion rates were also investigated. It has been observed that the diffusion rates of a metallic solute are of the same orders of magnitude in both metal-metal and metal-metalloid glasses. A higher diffusivity is likely if there is a large difference between melting points of the solute and matrix. Relaxation has no effect on diffusion, however, diffusivity increases on crystallization. An increase in diffusivity is also observed on plastic deformation of metallic glass.     

Effects of Substrate Temperatures on the Structure and UV-shielding Properties of TiO_2-CeO_2 Films Deposited on Glass by Radio-frequency Magnetron Sputtering

1Introduction Theultravioletrays(UV)insunlight(-4%)cantransmitintoroomthroughcommonfloatglass,theUVcanmakethematerialsintheroom,eg,paper,furni ture,textilefabricandplastics,becoloredanddeterio rated.ShieldingfromUVirradiationisofinterestinmanyfields.Formu…     

Heterogeneous Plantinum Nucleation and Crystallization of a Heavy-Metal Fluoride Glass

The effect of controlled heterogeneous nucleation by platinum on the crystallization of a ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) glass was studied. Various levels of platinum were incorporated into this glass by a combination of PtCl₂-doping and melting-atmosphere variation. The effect of doping levels and melting conditions on the incorporation of platinum and the subsequent nucleation of crystals was studied by optical microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), and X-ray diffraction. Increased platinum in the glass resulted in an increased number of nucleation sites for the growth of β-ZrF₄-BaF₂ crystals. Analysis of isothermal and ramp-rate DSC measurements indicated that the crystallization of this glass changed from surface controlled to bulk controlled with an increased number of nuclei. This was confirmed by optical microscopy. In addition, Avrami analysis of the isothermal crystallization data gave an accurate approximation of the number of nuclei in the glass.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

磷酸盐玻璃中Er~(3+)离子的光跃迁和激光作用

给出了Li-Al磷酸盐玻璃中Er~(3+)离子发射特性(Ar、σ_ρ、β、τ_γ)的计算结果。报道了Cr~(3+)→Yb~(3+)→Er~(3+)的一种有效能量转移,并获得了室温下3J1.54μm波长的激光输出。     

水工钢闸门聚酯玻璃钢复合防腐处理方法

水环境的恶化，使水工钢闸门腐蚀加重，传统的防腐工艺保护效果下降。聚酯玻璃钢复合防腐层的水工钢闸门防腐工艺具有使用设备少，工艺简单、防腐效果好、成本低等优点，适用于在各种水环境中作各种形式的水工钢闸门防腐，效果良好。该文结合江苏省淮海农场工程施工经验，提出了水工钢闸门聚酯玻璃钢复合防腐层结构设计、施工工艺及质量标难，为今后的推广应用提供了一定的参考依据。     

Acoustic study of nano-crystal embedded PbO-P2O5 glass

Nano-crystal embedded PbO-P₂O₅ glass has been prepared and characterized by XRD and TEM measurements. The ultrasonic velocity and attenuation measured within the temperature range 80–300 K show significant structure and interesting feature with the presence of nano-crystalline region. The glass samples were prepared by melt-quench method and nano-crystals of different sizes were produced by heat treatment of the glasses for different durations of heating. All the processes were carried out at or above glass transition temperature. A theoretical model that takes account of the effects of thermally activated relaxation, anharmonicity as well as microscopic elastic inhomogeneities arising out of fluctuations has been successfully applied to interpret the variation of ultrasonic velocity and attenuation data. An interesting outcome of this application has been to propose a method for the determination of the size of nano-crystals from the ultrasonic attenuation data.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

WF40防腐蚀涂料在原料水罐上的应用

中国石化股份有限公司洛阳分公司炼油厂污水汽提装置的原料水罐(V303)由于接触的污水中含有H2S,NH3,CO2,CN-,酚等多种腐蚀介质因此经常发生腐蚀泄漏事故。经涂刷WF40玻璃鳞片防腐蚀涂料后,已平稳运行两年。2002年检修检查,涂层完好,仍在继续使用。WF40涂料为环氧型玻璃鳞片涂料,其热膨胀系数与钢质基体接近,因此具有耐热冲击性强等优点。待涂罐体经喷砂除锈到Sa2.5级后,涂底漆2道,中间涂层2道、面漆2道,使干膜厚度达到350μm,可有效防止腐蚀性介质的渗透。