酚醛胺(T-31)环氧树脂固化剂之浅谈

介绍了酚醛胺(T-31)系列环氧固化剂及原料的现状和特点,并对酚醛胺(T-31)系列环氧固化剂进行了分代,阐述了第三代酚醛胺(T-31)系列环氧固化剂的系列化、专用化、高档化。预测和展望了2005年的需求和方向。     

Comparative study of the physical aging of the epoxy systems BADGE n = 0/m‐XDA and BADGE n = 0/m‐XDA/PEI

The physical aging of the epoxy network consisting of a diglycidyl ether of bisphenol A, m‐xylylenediamine, and polyetherimide was studied by differential scanning calorimetry. The glass transition temperature and the variation of the specific heat capacities have been calculated using the method, based on the intersection of both enthalpy–temperature lines for glassy and liquid states. The apparent activation energy (E_H) was calculated using a single method that involved separate temperature and excess enthalpy dependency. All calorimetric data were compared with those obtained for the epoxy network without thermoplastic. thermoplastic. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3931–3935, 2006     

Mechanical properties of epoxy networks based on DGEBA and aliphatic amines

The mechanical properties of epoxy networks based on diglycidyl ether of bisphenol A epoxy resin cured with various linear aliphatic amines, such as ethylenediamine, diethylenetriamine, triethylenetetramine, tetraethylenepentamine, and cyclic amines such as 1‐(2‐aminoethyl)piperazine and isophorone diamine, were studied. General characteristics such as T_g, density, and packing density, were determined and related to the structure and funcionality of the curing agent. Dynamic mechanical spectra were used to study both the α and β relaxations. Tensile and the flexural tests were used to determine the Young's and flexural modulus, and fracture strength all in the glassy state. Furthermore, linear elastic fracture mechanics was used to determine K_IC. As a rule, isophorone diamine network presented the higher tensile and flexure modulus while 1‐(2‐aminoethyl)piperazine gave the highest toughness properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

SOLUBILITY OF CO2 AND H2S IN A HINDERED AMINE SOLUTION

The solubility of H₂S and CO₂ in aqueous solutions of the sterically hindered amine, 2-amino-2-methyl-1-propanol (AMP), was determined at 40 and 100°C. Partial pressures of C)₂ ranged from approximately 2 to 6000 kPa and of H₂S from 2 to 2200 kPa. The solubility results were compared with previously reported acid gas solubilities in aqueous monoethanolamine (MEA) solutions.     

改性脂环胺固化剂的合成与性能

固化剂对环氧树脂的性能有着决定性的影响。合成了一种改性脂环胺类环氧树脂固化剂,探讨了合成工艺条件与固化剂性能的关系。合成的固化剂用于配制环氧树脂建筑结构胶,胶粘剂的综合性能良好,能满足GB50367—2006《混凝土结构加固设计规范》对结构胶的要求。     

三乙胺对丙烯酸酯-聚氨酯复合乳液的影响研究

采用原位乳液聚合法，合成聚氨酯-丙烯酸酯(PUA)复合乳液。通过粒径分析、黏度测定、力学测试等手段，研究了三乙胺对乳液性能和相行为变化等的影响。实验结果表明：随着中和度提高，乳液外观改善，贮存稳定性提高，吸水率增大，耐水性降低，拉伸剪切强度增大，而断裂伸长率降低，相转变点后延。     

YAG掺铷——钇铝石榴石激光晶体胶粘剂

YAG掺铷——钇铝石榴石激光晶体胶粘剂以丁腈改性环氧树脂,酚醛变性胺为固化剂,用于掺铷——钇铝石榴石激光晶体与钢套粘接,安装在陕西省人民医院YAG激光医用治疗机,临床应用3年,效果很好。后中国电子科技集团第二十七研究所从1990年开始用YAG激光胶粘剂粘接各类激光产品至今,经高低温试验、振动试验、冲击试验等各项性能测试及15年来工程应用证明,在各类激光产品中从未出现开裂、脱胶现象,性能稳定可靠,其粘接强度、耐冲击、耐振动、耐高低温变化、耐水、耐化学介质、耐光、耐老化性能均好,能满足生产要求,用途广泛,符合激光及各种工程应用。文中详述了酚醛变性胺固化剂的选择及该胶粘剂的性能。     

1-氯甲基磺酰胺类化合物的合成

以吡啶为催化剂,实现了氯甲基磺酰氯和芳香伯胺的磺酰化反应。考察了催化剂、溶剂、物料比、反应温度等条件对反应产率的影响。结果表明,最优反应条件为:n(胺)∶n(磺酰氯)=1∶1.3,吡啶为催化剂,二氯甲烷为溶剂,先0℃再室温下反应,反应时间为4～8h。在最优条件下,以42%～95%的产率合成了9种具有不同取代基的磺酰胺类化合物。利用IR、~1HNMR、~(13)CNMR对目标产物的结构进行了确证。     

可双固化树枝形聚酰胺-胺树脂的合成及其涂膜性能研究

探讨了以乙二胺与丙烯酸甲酯交替反应，制备了1．5，2．5代树枝形聚酰胺一胺树脂（PAMAM），对其用甲基丙烯酸缩水甘油酯（GMA）和γ-氨丙基三乙氧基硅烷进行了改性，使其能够紫外光固化和潮气固化。热分析考查了玻璃化温度和热稳定性，并进行了硬度、光泽、光固化速度、潮气固化速度、附着力、柔韧性等测试。     

聚合型受阻酚抗氧剂的合成及应用

研究了以对甲酚为主要原料合成聚合型受阻酚抗氧剂的工艺。结果表明，树脂缩合反应条件是对甲酚与双环戊二烯为3：1～1．25，ZnCl2催化剂为对甲酚质量分数的2．0％，反应温度为75～80℃，双环戊二烯滴加时间为2h。烷基化反应温度为70～75℃，H2S04催化剂为缩合树脂质量分数的2．0％。制得的聚合型受阻酚抗氧剂产品对聚氨酯泡沫用聚醚2802具有较好的抗氧化性，起燃温度达224℃。