Complementary modelling of fluid separation processes

Optimal functioning of numerous technological processes depends primarily on relevant process design, properly selected column internals and sufficient understanding of the process behaviour. This can be achieved only with the help of accurate and reliable process models capable of considering process rates in a rigorous way, with respect to both transport phenomena and chemistry. In this article, a new modelling concept called complementary modelling is suggested for a large class of fluid separation processes. Since the conditions and criteria for these processes vary considerably, it is impossible to develop a unified modelling approach. Instead, a reasonable and effective combination of different modelling approaches provides solutions to many present and future tasks. The complementary modelling is discussed in detail and illustrated with several case studies.     

A simplified method for modelling the effect of blinds on window thermal performance

An approximate method is presented for predicting the effect of a louvered blind on the centre‐glass thermal performance of a fenestration. The method combines a one‐dimensional heat transfer model with data from a numerical simulation of the window and blind. Sample results for a blind mounted on the indoor surface of a window show the effect of blind slat angle on heat transmission. Both summer and winter conditions are considered. The results show that a louvered blind can improve the U‐value of a standard double‐glazed window by up to 37%. Also, the radiation heat exchange with the room can be dramatically reduced (by up to 60%), which will improve the level of occupant comfort. However, there was found to be a trade‐off between U‐value and occupant comfort; placing the blind closer to the window improves the U‐value, but increases the radiation heat exchange with the room. The predictions from the present simplified method compare well with results from a full two‐dimensional computational fluid dynamics solution of the conjugate blind/window interaction. Copyright © 2005 John Wiley & Sons, Ltd.     

Assumptions and Consequences of Treating Providers in Therapy Studies as Fixed Versus Random Effects: Reply to Crits-Christoph, Tu, and Gallop (2003) and Serlin, Wampold, and Levin (2003).

In their comments on the authors' article (see record 2003-10163-009), R. C. Serlin, B. E. Wampold, and J. R. Levin (see record 2003-10163-011) and P. Crits-Christoph, X. Tu, and R. Gallop (see record 2003-10163-010) took issue with the authors' suggestion to evaluate therapy studies with nested providers with a fixed model approach. In this rejoinder, the authors' comment on Serlin et al's critique by showing that their arguments do not apply, are based on misconceptions about the purpose and nature of statistical inference, or are based on flawed reasoning. The authors also comment on Crits-Christoph et al's critique by showing that the proposed approach is very similar to, but less inclusive than, their own suggestion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Wind turbine response to parameter variation of analytic inflow vortices

As larger wind turbines are placed on taller towers, rotors frequently operate in atmospheric conditions that support organized, coherent turbulent structures. It is hypothesized that these structures have a detrimental impact on the blade fatigue life experienced by the wind turbine. These structures are extremely difficult to identify with sophisticated anemometry such as ultrasonic anemometers. This study was performed to identify the vortex characteristics that contribute to high‐amplitude cyclic blade loads, assuming that these vortices exist under certain atmospheric conditions. This study does not attempt to demonstrate the existence of these coherent turbulent structures. In order to ascertain the idealized worst‐case scenario for vortical inflow structures impinging on a wind turbine rotor, we created a simple, analytic vortex model. The Rankine vortex model assumes that the vortex core undergoes solid body rotation to avoid a singularity at the vortex centre and is surrounded by a two‐dimensional potential flow field. Using the wind turbine as a sensor and the FAST wind turbine dynamics code with limited degrees of freedom, we determined the aerodynamic loads imparted to the wind turbine by the vortex structure. We varied the size, strength, rotational direction, plane of rotation, and location of the vortex over a wide range of operating parameters. We identified the vortex conformation with the most significant effect on the blade root bending moment cyclic amplitude. Vortices with radii on the scale of the rotor diameter or smaller caused blade root bending moment cyclic amplitudes that contribute to high damage density. The rotational orientation, clockwise or counter‐clockwise, produces little difference in the bending moment response. Vortices in the XZ plane produce bending moment amplitudes significantly greater than vortices in the YZ plane. Published in 2005 by John Wiley & Sons, Ltd.     

影响GPS水准高程的因素及高程拟合方法的探讨

在简单介绍高程系统的基础上，对影响GPS高程精度的几何水准联测误差、卫星分布不对称、星历误差、多路径误差等因素逐一进行了分析，并提出了相应的改进措施。同时，还对高程拟合使用的稳健估计方法进行了探讨。     

摩托车起动电机安装设计及工艺保证

介绍摩托车起动电机的安装设计原则和方法，安装误差的形成与计算，以及达到安装设计要求的工艺保证措施，同时还分析了在检测和加工中所存在的一些做法。     

Development of intelligent multisensor surveillance systems with agents

Intelligent multisensor surveillance systems consist of several types of sensors, which are installed on fixed and mobile devices. These components provide a huge quantity of information that has to be contrasted, correlated and integrated in order to recognize and react on special situations. These systems work in highly dynamic environments, with severe security and robustness requirements. All these characteristics imply the need for distributed solutions. In these solutions, scattered components can decide and act with some degree of autonomy (for instance, if they become isolated), or cooperate and coordinate for a complete tracking of special situations. In order to cope with these requirements and to better structure the solution, we have decided to design surveillance system control as a multiagent system. This is done by applying an agent-orientated methodology, which is assessed with concrete scenarios.     

Modelling of Al2O3 Powder Compaction with Hot Pressing in a Rigid Die

Computer modelling of hot pressing is provided. Kinetics are described for compaction during hot pressing in a rigid die, and the change in density distribution, irreversible solid phase strain accumulation, and equivalent stresses are studied by means of the finite element method. Shrinkage during the preparation of complex-shaped articles by hot pressing pure Al₂O₃ powder in a graphite die without a protective atmosphere and the physicomechanical properties of the finished article are studied. Calculated and experimental results agree satisfactorily.     

IMAGIS在数字校园建模中的应用

介绍了IMAGIS的功能和工作流程以及IMAGIS空间数据的获取途径,利用IMAGIS进行数字校园三维建模的实现,并以河南理工大学北校区数字校园建设为例介绍了IMAGIS在三维景观建模中的应用。     

Estimating thermal stress in BIPV modules

The thermal stress on building‐integrated photovoltaic modules (BIPV) in Espoo, Finland, was studied with field‐testing of amorphous silicon modules. Based on these results, the thermal stress at two other European locations (Paris and Lisbon) was estimated. The estimation procedure entailed thermal modelling of heat transfer in the façade with meteorological data as input. The results indicate that the thermal stress on BIPV modules in Lisbon is, in this case, approximately 50% higher that in Espoo and between 80 and 200% higher than in Paris, depending on the activation energy of the degradation process. The difference in stress between a BIPV module and a free‐standing module in Espoo was 50–200%. Copyright © 2006 John Wiley & Sons, Ltd.