三维方腔流的混合有限分析解

本文建立了三维对流扩散方程的混合有限分析八点隐格式，并证明了它的基本数学性质。应用原函数法和交错网格技术给出了三维Ｎ—Ｓ方程的混合有限分析解法，计算了雷诺数Ｒｅ＝２０、５０和１００三种情况下的三维方腔内的流场，结果与已有计算成果一致。     

环形锻件钢坯铸钢模上出模斜度的研究与应用

分析了环形锻件终锻成形前的预锻件,即:铸钢坯在浇注成形时使用模具的型腔结构对其铸钢坯的质量有严重影响的主要因素,如对型腔表面出模斜度值的改进提出了新的技术方案。     

锌电积过程中添加剂对阴极的影响

目前锌电积过程中常用到的添加剂有骨胶、硫脲、十二烷基磺酸钠及一些辅助添加剂等。本文从性质、机理及加入控制上详细地对各种添加剂进行了细致分析,并总结出不同添加剂对阴极板锌的析出质量的影响。     

ON THE SLOW MANIFOLD CHARACTERISTICS OF CAPILLARY SUCTION APPARATUS DYNAMICS

The nonlinear dynamic behaviour relating the wet front size and liquid saturation under inner cylinder (or rectangular cell) in cylindrical (or rectangular) capillary suction apparatus was investigated. The slow manifold explanation was proposed and the fast- and slow-varying variables were identified. Experiments were conducted to verify theoretical findings.     

热光双稳态的临界入射功率与临界温升

本文考虑到F—P腔夹层介质和后反射镜均具有一定的吸收时,推导出产生热致色散光学双稳态的临界入射光功率P_c和临界温升△T_c的数学解析表达式。理论计算的 △T_c值与实验值非常符合。为了得到最佳光学双稳态回线和避免腔内的纵向温度梯度,夹层介质和后反射镜应具有一定的匹配吸收。     

Interpreting the negative mood-helping literature via "mega"-analysis: A contrary view.

"Mega"-analysis was developed by M. Carlson and N. Miller (see record 1987-31249-001) as an extension of traditional meta-analytic procedures for conducting integrative reviews of existing research literatures. One such mega-analysis was conducted by Carlson and Miller to synthesize the literature on the relation between negative mood states and helping. That analysis found no support for a theoretical account (negative state relief) that had been confirmed previously by using various experimental approaches. In an attempt to reconcile the discrepancy, the logic and methods used in Carlson and Miller's mega-analysis of the negative mood-helping literature were examined, and several serious problems were found. These problems are discussed, and data are presented to show that the results of that mega-analysis, and perhaps all mega-analyses, should not be viewed with confidence. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

三相电压不平衡情况下电机车整流技术的研究

针对煤矿井下直流电机车变流系统中存在三相电压不平衡而使传统的PWM整流器的交流侧出现负序电流分量的问题,提出了一种在三相电压不平衡情况下抑制PWM整流器交流侧负序电流分量的控制策略;详细介绍了该控制策略的具体实现。仿真及现场实验结果表明,采用该控制策略后,PWM整流器的交流侧电流波形基本接近正弦波形,实现了单位功率因数运行。     

压风机恒压供风系统设计

针对某矿压风机往井下输送高压空气时存在输气总管压力波动大且调节困难的问题,设计了一种基于变频调速和闭环负反馈控制的压风机恒压供风系统。该系统通过输气总管上的压力传感器采集实时压力信号,与输入压力信号比较后得到偏差信号,PLC对偏差信号进行分析和处理,并输出相应的变频器调节信号,使变频器改变压风机电动机的电源频率,从而达到调节输气总管压力的目的。实际应用表明,该系统运行稳定、可靠,实现了输气总管高压空气的恒压输送。     

电子和β射线两用外推电离室的研制

本文研制了一台测量电子束和β射线吸收剂量的外推电离室,其空腔室壁材料可拆换并分别与空气、组织和硅等效,收集电极名义直径为1.5、3、10和30mm,空气空腔可变范围为0.2～15mm。该外推电离室具有在空腔内部测温,自动改变窗口上方材料厚度及采用微型计算机控制等特点。适用于测10 MeV能量以下,剂量率为10~5～10~(-3)Gy/h的电子或β射线吸收剂量。整个外推电离室自动测剂量系统在测~(204)TLβ放射源表面剂量率的不确定度为2.3％。测1.5 MeV电子束在硅和哈密瓜深部剂量率时,不确定度分别为4.0％和2.8％。     

湿砂型铸铁件的胀砂、缩孔、缩松缺陷--湿砂型铸铁件缺陷讲座(五)

叙述胀砂与缩孔、缩松的关系，说明提高砂型刚度对防止胀砂、缩孔、缩松的重要性。指出型砂强度和砂型的紧实程度是常温下影响湿砂型刚度的主要因素。对影响湿砂型浇注时的刚度的各种因素进行了分析。