Disposal of Waste Plastics With Traditional Coking Process

A new technology for treating waste plastics （WP） by traditional coking process was introduced. With a thermo-balance and a 10 g atmospheric fixed bed reactor, the thermo-gravimetric behavior and product were studied during co-coking of WP with blended coal. And then, using a coke-oven with capacity of 200 kg, the characteristics of products were assessed. The results showed that there is an overlapping temperature range （200-550℃ ） of decomposition between WP and blended coal, and the pyrolysis synergism index η and synergism strength β proposed could evaluate the synergism between them. 1% of added WP results in the maximum synergism in all series experiments. The increase of added WP decreases the synergism. Tar yield in co-coking is increased with the decrease of water yield for synergism. Moreover, it was also found that the quality indexes of coke, such as M10, M40, CRI and CSR, are degraded with the increase of WP until 4%, though the quality of tar and gas is optimized for WP addition.     

聚烯烃塑料改性的研究进展

聚乙烯、聚丙烯以优良的力学性能、热性能、加工性能等成为最主要的聚烯烃塑料品种,大量用于生产薄膜、管材和板材。通过改性可获得高刚性、高强度、高耐热、低成本的聚烯烃塑料。综述了近年来聚乙烯和聚丙烯在接枝、交联、填充、共混等方面的改性进展,并指出了研究方向和发展趋势。     

纳米塑料研制进展(续)

综述了纳米塑料（包括PE、PP、PVC、PET、PBT、PA）的研制、性能、应用和展望。     

Radiation effects on insulators for superconducting fusion magnets

Fibre-reinforced plastics (FRPs) are candidate materials for the insulation of superconducting magnet coils in future fusion reactors. This paper reports on a test programme performed to assess the mechanical properties of these materials and to obtain information on the damage and fracture mechanisms. Different types of FRPs (epoxies and poly- and bismaleimides as resins; two- and three-dimensional E-, S- or T-glass fabrics as reinforcements) were irradiated at room temperature by 2 MeV electrons and ⁶⁰Co-gamma rays up to 1.8 × 10⁸ Gy and by different reactor spectra up to a neutron fluence of 1 × 10²³ m⁻² (E > 0.1 MeV) at room temperature, 80 K or 5 K. Mechanical tests in tension as well as in the intralaminar crack opening and shear mode were carried out on the irradiated samples at 77 K. After low temperature irradiation, half of the samples were subjected to a warm-up cycle to room temperature before testing at 77 K. Results on the influence of different radiation sources and annealing cycles on the mechanical properties of these materials will be discussed.     

Sorption of solvents in plastics and solvent desorption and retention

The experiments reported here have studied the following systems within the temperature range 25–50°C: sorption and desorption of solvents on LDPE, OPP, PS, rigid PVC, OPA, PETP and regenerated cellulose with methanol, ethanol, n-propanol, and ethyl acetate. With reference to these, the theory presented indicates the most important aspects related to the tests, refers to identification data on similar problems and enumerates the possibilities of interaction. The application of equation 1 and the reported measuring method allows the determination of diffusion coefficients within a vapour-saturated atmosphere system. As the gravimetric method also allows the determination of solubilities (α_L, the solubility coefficient), the permeation behaviour in the Fick range is calculable from The equation used by the author can be related to other equations from the technical literature, such as for the range Q_(t)Q∞>0.4, or where for the range <0.4 The agreement can be considered as good. The D values provide a calculation base within the scope of the outlined problem definition. The taste limits for solvents in water reveal which solvents could, as residual solvents, become critical. These values—connected with sorption/desorption identification values, evaporation numbers etc. —indicate where there is a risk and those cases where sufficient drying, or even the use of more adequate solvents is essential.     

高分子材料在建筑装潢中的运用与发展

阐述高分子建筑材料的概念和特点,分析高分子材料在建筑装潢领域的运用现状,介绍了建筑装潢领域常用的高分子材料的类别、特点和具体应用,探究建筑装潢领域高分子材料的发展趋势,促进高分子建筑材料的创新和科学发展。     

世界塑料添加剂现状和发展

介绍了国内外一些主要和新型塑料添加剂的现状及发展趋势。添加剂功能不仅可以改善聚合物的工艺性能、改善加工条件、提高加工效率,而且可以改进制品性能、提高制品的使用价值、延长制品的使用寿命。并指出塑料添加剂未来的发展趋势将是高效、专用母料、无毒、环境友好及多功能化。     

塑料阻燃剂的合成研究进展

通过对常用塑料的燃烧特性和阻燃剂的阻燃机理的分析,论述了卤系、聚合型有机磷系、磷—氮系和无机系等不同类型阻燃剂的阻燃特性、发展动向及几种具有发展前途的新型阻燃技术,指出无卤、高效、低烟、低毒、多功能的新型阻燃剂合成及其新型阻燃技术的研究是阻燃剂的发展方向。     

竹/玻璃钢复合建筑材料的研制及性能分析

竹/玻璃钢复合建筑材料是一种新型三维复合材料.本文对其进行了结构设计的研究,并通过大量试验对其力学性能进行了分析,结果证明竹/玻璃钢复合建筑材料确实是一种重量轻、性能好、工艺简单、价格便宜的材料,具有广阔的应用前景.