Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.     

液相本体法聚丙烯工业废水排放的优化

通过对聚丙烯工业废水排放问题的研究探讨,提出了相应的工艺优化方案,并在生产中予以实施。结果表明:在一定程度上降低了废水排放量;实现了工业用水循环使用的目的。     

氯化聚丙烯改性胶粘剂的合成及粘附性能研究

以甲苯为溶剂，过氧化二苯甲酰(BP0)为引发剂，通过自由基聚合，采用甲基丙烯酸羟乙酯(HEMA)和苯乙烯(St)接枝改性氯化聚丙烯(CPP)。研究了不同苯乙烯用量、不同反应温度、不同反应时间、不同引发剂用量对改性氯化聚丙烯胶粘剂粘附性能的影响，得出较佳的工艺条件为反应温度90℃，反应时问2h，原料配比m(CPP)：m(HEMA)：m(St)：m(BPO)=50：0．5：0．6：0．15。     

振动力场对聚丙烯/硅灰石复合材料性能的影响

采用三螺杆动态混炼挤出机通过熔融共混制备了聚丙烯(PP)/硅灰石复合材料,研究了振动工艺参数对材料力学性能及微观形态结构的影响。结果表明,PP/硅灰石复合材料的力学性能对振动参数的响应并不是单调增加,而是存在一个最佳的响应范围。在这一范围内,其综合力学性能得到极大提高。     

抗静电聚丙烯电机塑料风叶的研制

研究了导电炭黑添加量、炭黑形状、试样成型方法对电机塑料风叶用聚丙烯(PP)材料抗静电性能的影响,采用接枝、增强、增韧技术制得具有优良力学性能和抗静电性能的PP材料。结果表明,炭黑的质量分数为5%时,材料表面电阻率为108Ω数量级,力学性能优良,达到电机用塑料风叶材料的指标要求,并可应用于其它对抗静电性能要求较高的场合,用于制造某些结构件。     

多变量预估控制技术在聚丙烯装置上的应用

介绍了多变量预估控制技术在长盛石化聚丙烯装置的设计、开发过程以及多变量预估控制器的运行情况和应用效果,证明了应用该技术的系统增强了装置的抗干扰能力,提高了装置生产的平稳性,减轻了操作负荷和能耗,增加了装置效益,改变了传统的生产模式。     

PP/PVC/PP-g-(St-co-MMA)的形态结构

以苯乙烯一甲基丙烯酸甲酯共聚物接枝聚丙烯[PP—g-（St—co—MMA）]为相容剂，利用扫描电子显微镜（SEM）和x射线能谱仪（EDS）对PP／PVC／PP—g-（St—co-MMA）的形态结构进行了研究。由x射线能谱微区分析得到了共混物中氯元素面分布图，对氯元素面分布进行了粒径统计。结果表明，在PP／PVC中加入PP-g-（St—co—MMA）相容剂，共混物亚微观相形态结构发生了变化。PP—g-（St—co—MMA）能够明显降低PP／PVC共混物中PVC分散相的分散尺寸，提高共混物两相之间的相容性。改变相容剂的用量和共混物的组成，都对体系的形态结构产生影响。     

Synthesis and characterization of poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol) block copolymers prepared by a salicylaldimine‐aluminum complex

A series of poly(?‐caprolactone)‐b‐poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights were synthesized with a salicylaldimine‐aluminum complex in the presence of monomethoxy poly(ethylene glycol). The block copolymers were characterized by ¹H NMR, GPC, WAXD, and DSC. The ¹H NMR and GPC results verify the block structure and narrow molecular weight distribution of the block copolymers. WAXD and DSC results show that crystallization behavior of the block copolymers varies with the composition. When the PCL block is extremely short, only the PEG block is crystallizable. With further increase in the length of the PCL block, both blocks can crystallize. The PCL crystallizes prior to the PEG block and has a stronger suppression effect on crystallization of the PEG block, while the PEG block only exerts a relatively weak adverse effect on crystallization of the PCL block. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

改性透明聚丙烯

主要介绍了聚丙烯透明改性的基本原理、透明剂的合成以及聚丙烯的透明改性方法和工艺过程 ,对聚丙烯透明改性的国内外研究现状进行了评述 ,并以山梨糖醇衍生物透明成核剂为主简述了透明聚丙烯的加工过程、性能和应用     

超声挤出DP/纳米SiO2复合材料的拉伸与流变性能

在高能超声波作用下,将纳米SiO2和一种新颖的共聚聚丙烯(DP)熔融共混,制备纳米复合材料,研究了纳米SiO2含量和超声波对复合材料拉伸和流变性能,以及脆断面形貌的影响。结果表明,低含量(≤2%)纳米SiO2对DP有增强作用,随着填料含量增加断裂强度下降。超声波的引入能提高含量较高SiO2(>2%)的复合材料的断裂强度和断裂伸长率,降低体系黏度,并有助于纳米SiO2在DP基体中均匀分散。