微波热处理制备硅化物涂层及其抗高温氧化性能

通过微波加热包埋渗法在高铌钛铝合金基体上制备了硅化物涂层,微波加热功率2.6 kW,埋渗时间2 h。利用扫描电镜、能谱分析和X射线衍射等手段研究了氧化前后涂层的表面形貌、截面形貌、涂层中元素分布和物相组成。结果表明：涂层外部主要物相为TiSi2和NbSi2,并有少量的Ti5Si3和Nb5Si3相,厚度约为15μm;内侧涂层有大约15μm的富铝层。1000℃下氧化100 h的氧化动力学测试结果表明：高铌钛铝合金渗硅后的抗高温氧化性能、抗剥落性能有了显著提高,其单位面积增重量和剥落量分别是0.5714 mg/cm2和0.7143 mg/cm2,仅为无涂层试样氧化增重量和剥落量的1/22倍和1/59倍。     

A new exact analytical approach for free vibration of Reissner-Mindlin functionally graded rectangular plates

An exact closed-form procedure is presented for free vibration analysis of moderately thick rectangular plates having two opposite edges simply supported (i.e. Lévy-type rectangular plates) based on the Reissner-Mindlin plate theory. The material properties change continuously through the thickness of the plate, which can vary according to a power law distribution of the volume fraction of the constituents. By introducing some new potential and auxiliary functions, the displacement fields are analytically obtained for this plate configuration. Several comparison studies with analytical and numerical techniques reported in literature are carried out to establish the high accuracy and reliability of the solutions. Comprehensive benchmark results for natural frequencies of the functionally graded (FG) rectangular plates with six different combinations of boundary conditions (i.e. SSSS-SSSC-SCSC-SCSF-SSSF-SFSF) are tabulated in dimensionless form for various values of aspect ratios, thickness to length ratios and the power law index. Due to the inherent features of the present exact closed-form solution, the present results will be a useful benchmark for evaluating the accuracy of other analytical and numerical methods, which will be developed by researchers in the future.     

空气横掠矩形翅片椭圆管束换热规律的数值研究

采用Fluent软件对矩形翅片椭圆管束空气侧的对流换热情况进行了三维数值模拟，获得了不同流速下翅片表面温度分布，分析了迎面风速与换热系数之间的关系，随着速度的增大，空气侧的换热系数增加，并拟合了换热计算公式。同时分析了不同翅片间距对换热的影响因素，随着翅片间距的增大，空气侧换热系数增加，而且随着Rg数的增加，换热的强化更加明显。     

Study and optimization of the thermal performances of the offset rectangular plate fin absorber plates, with various glazing

The low thermophysical characteristics of air used as a heat transfer fluid in the solar collectors with thermal conversion require a fully developed turbulent flow. This increases the thermal heat transfer between the absorber plate and the fluid, which clearly improves the thermal performances of the solar collector with obstacles arranged into the air channel duct. In the present work, we introduce, in solar collector, the offset rectangular plate fins, which are used in heat exchangers. An experimental investigation carried out showed the generated enhancement of thermal performance. The offset rectangular plate fins, mounted in staggered pattern, are oriented parallel to the fluid flow and are soldered to the underside of absorber plate. They are characterized by high heat transfer area per unit volume. High thermal performances are obtained with low pressure losses and in consequence a low electrical power consumption by the fan in comparison to the flat plate collector. The experimental results are all so compared by using two types of transparent cover; double and triple.     

鳍片管代替光管省煤器及结构优化改造综述

在分析鳍片管束结构与传热特点的基础上,介绍了鳍片管代替光管省煤器的改造设计和应用情况。分析了鳍片管的直径、鳍片高度、厚度、管间距等参数及管束布置方式对省煤器传热特性、阻力特性、积灰和磨损等方面的影响。提出了鳍片管省煤器受热面优化设计的方法和步骤。     

窄间隙矩形通道的临界热流密度解析模型

根据窄间隙矩形通道的流道结构特点,参考圆管环状流临界热流密度(CHF)预测解析模型,得到了窄间隙矩形通道内环状流CHF解析模型.该模型可以预测通道间隙不小于0.5 mm的窄间隙矩形通道内发生沸腾两相流环状流时的CHF值.计算表明,当窄间隙矩形通道的进口截面宽高比为25～85时,通道内的CHF值强化比较明显.     

矩形管内纵向涡强化传热研究

将纵向涡强化换热技术应用于矩形管槽,研究以水为换热介质在过渡流状态下的换热效果。实验结果表明有纵向涡发生器的换热效果明显优于无纵向涡发生器的情况。利用PHEON ICS计算软件对实验进行数值模拟,模拟值与实验值符合较好。在此基础上,改变纵向涡的翼高和形状来模拟,发现两者均为换热影响的因素,相比之下,高宽比为0.4纵向涡发生器的换热效果比高宽比为0.5和0.6的要好。而采用相同高宽的矩形翼时,N u高于三角翼,但其换热性能指标却低于直角三角翼。     

Aluminum scandium nitride thin-film bulk acoustic resonators for wide band applications

Piezoelectric c-textured Al_(1−x)Sc_xN thin films, where the Sc relative concentration, x, varies in the range 0-0.15 have been studied in view of radio frequency (RF) electro-acoustic applications. Thin film bulk acoustic wave resonators (FBARs) employing these films were fabricated and characterized as a function of the Sc concentration for the first time. The measured electromechanical coupling is found to increase by as much as 100% in the above concentration range. The results from this work underline the potential of the c-textured Al_(1−x)Sc_xN based FBARs for wide band RF applications.     

Nd掺杂对钛酸钡电磁及微波吸收特性影响研究

采用溶胶-凝胶法制备稀土Nd掺杂钛酸钡纳米粉体.采用X射线衍射(XRD)、矢量网络分析仪等手段分别分析表征了样品的微结构和高频电磁特性.结果表明,Nd离子掺杂的钛酸钡样品在750℃温度下退火1h,结晶良好.随着Nd掺杂量的提高,晶粒细化.Nd离子掺杂后,在高频下钛酸钡纳米粉体的介电常数的实部略有减小,虚部峰值得到提高,...     

Zr4+B位置换对(Pb0.5Ca0.5)(Fe(0.5)Nb0.5)O3

研究了Zr4+离子B位置换改性对(Pb0.5Ca0.5)(Fe0.5Nb0.5)O3陶瓷微波介电性能.实验结果表明,(Pb0.5Ca0.5)(Fe0.5Nb0.5)O3(PCFNZ)陶瓷样品呈现单一斜方钙钛矿相结构.随Zr(4+)离子的置换量增加,PCFNZ陶瓷体系的Qr值和晶粒尺寸逐渐减小;介电常数εr随着置换量增加...