改性石英砂滤料强化过滤处理含藻水

采用改性石英硝滤料强化过滤处理含藻水的试验结果表明，与石英硝滤料相比，改性石英硝滤料对含藻水具有优良的处理效果；经混凝沉演后水中的余铝对藻类的去除有促进作用。     

直线式电机在有杆抽油设备中的应用

通过对游梁式抽油机的效率、启动特性与直线式电机驱动的有杆抽油机特性的对比，论述了直线抽油机的优越性及应用前景。     

一种构思新颖的抽油机设计方案

介绍了一种与现有抽油机结构完全不同的机 电一体化抽油机 ,它主要由往复滚筒提升总成、减速器总成、蓄能助启系统及电磁自动控制和动力系统组成。其特点是采用机 电一体化设计 ,充分利用飞轮的蓄能及与电磁自动控制器的相互配合来控制电磁离合器的激磁电流和电动机的电力输入 ,实现上冲程时通电、下冲程时断电的工作方式。该机体积小 ,结构紧凑 ,适应性强 ,能满足抽油井超长冲程和节能的要求     

一种新型三坐标雷达点迹提取器的设计

在目标信号检测模块的基础上增加了测有计算模块，构成一种新型的单脉冲雷达点迹提取器，显著提高了雷达系统潜在的处理能力。     

余热热处理对热变形低铬半钢耐磨性的影响

通过冲击磨损试验，测试了变形低铬半钢耐磨性，并对其磨损面特征进行了分析。结果表明：该钢变形后经适当的余热热处理可获得较高的耐磨性能。     

糯扎渡水电站机组主保护方案

结合糯扎渡水电站大型机组的发电机结构、发电机中性点引出方式及主接线对发电机主保护方案进行了分析研究，提出了发变组主保护方案，并初步确定了发电机中性点CT配置方案。同时也对主要的后备保护及异常运行保护进行了分析，并提出了设置方案。     

Simulation of Strength Distribution in Ground Ceramics by Incorporating Residual Stress Effect

Strength of ground ceramics may be affected by residual stress as well as surface flaws induced by grinding. Strength prediction for ground ceramics is convenient for mechanical design of ceramic components. In this article, a numerical procedure based on fracture mechanics was proposed to estimate strength distribution of ground ceramics by considering grinding-induced residual stress. Bending strength and residual stress of ground ceramics were measured for three grinding-conditions. By comparison of simulated results with experimental ones, it was revealed that strength characteristics in experiments were well simulated by using the proposed procedure.     

The Effect of the Estimation on Goodness‐of‐Fit Tests in Time Series Models

Abstract. We analyze, by simulation, the finite‐sample properties of goodness‐of‐fit tests based on residual autocorrelation coefficients (simple and partial) obtained using different estimators frequently used in the analysis of autoregressive moving‐average time‐series models. The estimators considered are unconditional least squares, maximum likelihood and conditional least squares. The results suggest that although the tests based on these estimators are asymptotically equivalent for particular models and parameter values, their sampling properties for samples of the size commonly found in economic applications can differ substantially, because of differences in both finite‐sample estimation efficiencies and residual regeneration methods.     

基于DELPHI的镍氢电池管理系统软件设计

通过对镍氢电池性能的研究，给出了一个应用ISA总线技术构建的、基于DELPHI编程平台的镍氢电池管理系统的设计方案，重点介绍了该系统的软件技术和实现方法。     

LMB-018A显示模块的原理及与DSP的接口

LMB-018A是深圳拓微电子有限公司推出的内含控制器和驱动器的点阵式液晶显示模块。文中介绍了该模块的原理及功能．给出了其与DSP接口的硬件电路和软件设计方法。