高功率固体激光器

本文详细讨论了设计高平均功率固体激光器的有关问题,包括激光材料性质、棒状和板条状几何结构,聚光器和光学谐振腔等。分析表明,板条状几何结构固体激光器提供了达到千瓦级功率水平同时又保持良好光束质量的可能性。     

连铸坯红送热装应用效果分析

对加热炉用连铸坯红送热装效果的分析结果表明，该技术的应用可节能降耗，提高产量和加热质量。     

A general variance predictor for Cavalieri slices

A general variance predictor is presented for a Cavalieri design with slices of an arbitrary thickness t ≥ 0. So far, prediction formulae have been available either for measurement functions with smoothness constant q = 0, 1, … , and t ≥ 0, or for fractional q ∈ [0, 1] with t = 0. Because the possibility of using a fractional q adds flexibility to the variance prediction, we have extended the latter for any q ∈ [0, 1] and t ≥ 0. Empirical checks with previously published human brain data suggest an improved performance of the new prediction formula with respect to the hitherto available ones.     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.     

Efficient modeling of panel-like structures in perforation simulations

This paper presents results of numerical simulations for impact effects in panel-like structures using solid and shell element modeling techniques. Three examples from experiments in literature have been numerically analyzed. The nonlinear transient dynamic analysis code, LS-DYNA is used in the simulations to model projectiles and panel-like targets. It is found that models established for panel-like targets using solid shell elements cannot only save significant computational effort, but also produce good results as long as the panel-like targets satisfy certain conditions. A criterion that governs the validity of modeling panel-like targets with shell elements is proposed in the paper.     

武钢第二炼钢厂连铸坯喷号机自动控制系统

对武钢第二炼钢厂连铸坯喷号机自动化控制景统配置、网络通讯、伺服控制系统进行了阐述；经运行考验证明系统性能提高、稳定可靠。     

机构设计在大型柱面网壳结构施工中的应用

 将机械行业中的机构运动概念应用到大型柱面网壳结构的施工，提出一种“折叠展开式”整体提升施工技
术． 详细阐述了该项施工方法的基本思想，并推导机构运动过程的运动学和动力学公式． 通过一个工程算例的分
析，总结机构运动和动力特性．计算结果证明机构运动过程中产生的动力效应不明显，处于“折叠”状态的网壳能够
承受施工荷载．该项新技术在亚洲最大跨度的柱面网壳结构的施工中得到了成功应用，证明了它的实用性和优越性．     

论薄板坯连铸连轧产品质量优势

通过对薄板坯连铸连轧工艺的分析，深入研究了其产品的质量优势，同时还指出了在产品生产过程中需要重点注意解决的一些问题。     

板坯连铸机二切短流程生产线的开发和应用

3^#板坯连铸机二切工序一直不能正常工作，采用了在线切割工艺，根据切割条件和切割周期等参数，结合板坯连铸出坯线短、车间小的特点，确定二切机的位置在距一切终止点15m处。改进了清渣系统，采取了升降挡板和定尺板相结合的定尺方式，设定不同的辊道运输速度等措施，保证了二切设备的正常运行，实现了板坯的热送热装．     

配置抗冲切钢筋的混凝土异形柱-板柱连接试验研究

在9个柱截面为三种典型异形柱(十字形、T形和L形) -板柱连接未配置抗冲切钢筋时的冲切特性试验基础上,以十字形柱-板柱连接为代表,通过三个配置抗冲切钢筋试件与三个未配抗冲切钢筋试件的对比试验,研究了异形柱-板柱连接配置抗冲切钢筋后的冲切特性,同时将锚栓和箍筋的抗冲切性能进行了对比。试验结果表明,抗冲切钢筋可以有效地提高板的受冲切承载力和延性,在改善延性方面,锚栓比箍筋更有效。另外,将国外几个主要规范ACI3 18、BS8110及MC90 ,关于对非矩形荷载面冲切临界截面周长的规定进行了比较,从试验结果看,ACI3 18规范的取法更合理。