板型燃料组件内部温度场数值模拟

以板型燃料组件为研究对象，采用商用流体力学计算程序CFX5对板型燃料组件内部温度场进行数值模拟。数值计算结果表明：燃料组件不同流道的流速分布和温度分布均较均匀，单一流道的流速分布和温度分布也较均匀。燃料板所构成的各流道从外到内流速变化不太大，在中间流道内流速稍小一些，但差值很小；燃料组件单一流道内的流速在壁面附近快速减小，壁面上流速为0。燃料板和定位梳的温度最高，侧板温度与板间流体温度相近，侧板外侧的流体温度较低。     

中原油田水平井钻井液技术

根据中原油田地层高温、高盐、易塌、易漏失及水平井的特点,优选了适用于水平井的强抑制强封堵聚合物钻井液体系,并进行了现场应用.室内实验结果表明,优选的强抑制强封堵聚合物钻井液具有良好的井眼净化、摩阻控制、井壁稳定及油层保护等性能.现场应用时能满足钻井、录井、测井的需要,钻井施工顺利,取得了良好的经济和社会效益.     

无线随钻测量技术的应用现状与发展趋势

目前,无线随钻测量技术是石油工程技术发展的一个主要方向。详细介绍了无线随钻测量仪器的传输方式、国内外无线随钻测量技术的主要进展和应用现状,指出了国内外无线随钻测量仪器的优缺点和应用范围,分析了无线随钻测量技术的发展趋势,并提出我国应在借鉴国外先进的无线随钻测量技术的基础上,研制具有自主知识产权的无线随钻测量仪器,以加快我国无线随钻测量技术的发展,缩短与国际先进水平的差距。     

Flow Control Through the Use of Topography

In this work, optimal shaft shapes for flow in the annular space between a rotating shaft with axially-periodic radius and a fixed coaxial outer circular cylinder, are investigated. Axisymmetric steady flows in this geometry are determined by solving the full Navier-Stokes equations in the actual domain. A measure of the flow field, a weighted convex combination of the volume averaged square of the L₂-norm of the velocity and vorticity vectors, is employed. It has been demonstrated that boundary shape can be used to influence the characteristics of the flow field, such as its velocity component distribution, kinetic energy, or even vorticity. This ability to influence flow fields through boundary shape may be employed to improve microfluidic mixing or, possibly, to minimize shear in biological applications.     

巴彦浩特探区钻井液技术初探

巴彦浩特探区钻井液工艺技术的重点是，解决疏松砂砾岩地层水涌漏同层、侏罗系地层水的HCO3^-污染及可能出现的火成岩地层井塌复杂。结合内蒙古巴彦浩特探区地层和井身结构特点，采用了两性聚合物／氯化钾钻井液和氯化钾／石膏-聚磺钻井液体系。该体系抑制能力强，性能稳定．容易实现低固相、低密度近平衡钻井，保护储层效果好。对复杂情况采取了有针对性的处理办法：平稳操作和合理的钻井工程措施是预防水层涌漏同层和火成岩井塌复杂的重要手段；用井场易得的固井水泥或石膏配合烧碱处理HCO3^-污染简便易行；处理火成岩井塌复杂，控制合适的钻井液性能是必要的。     

Consumption of solutions containing sodium chloride is enhanced in female oxytocin-deficient mice.

Intact and ovariectomized oxytocin (OT)-deficient (OT-/-) and wild-type (OT+/+) mice were tested for consumption of 0.5 M NaCl solution or tap water in a 2-bottle choice test. During 3 days of acclimation, voluntary ingestion of NaCl was equal between genotypes. After overnight fluid deprivation, intact OT-/- mice ingested 2 times more NaCl solution than OT+/+ mice in the 6th hr, but not the 1 st hr, after reintroduction of fluid. Ovariectomized mice consumed less than intact mice after overnight fluid deprivation. When a 0.2 M NaCl solution was administered for 6 days in ovariectomized mice, OT-/- mice voluntarily consumed greater amounts than OT+/+ mice. After overnight fluid deprivation, consumption by OT-/- mice was 3 times that of OT+/+ mice at 1 hr and 2-fold greater after 6 hr. Enhanced intake of NaCl-containing solutions in female OT-/- mice suggests that central OT may be an important inhibitor of sodium consumption. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

香豆胶衍生物的化学结构及稳定性研究

将市售商品溶于水,用异丙醇沉析提纯,溶于0.1 mol/L NaNO3纯水溶液中,经0.5μm滤膜过滤后用水相凝胶渗透色谱法(GPC)测定,测得香豆胶(FG)、羟丙基香豆胶(HPFG)、阳离子香豆胶(CFG)的数均、重均相对分子质量Mn、Mw分别为:1.19×105、3.36×105,8.52×104、2.85×105,9.33×104、2.87×105。用甘露聚糖链在碱性条件下醚化时发生降解,解释两种改性FG的相对分子质量较FG低而多分散性(Mw/Mn)较FG高的测试结果。认为商品FG的1%水溶液黏度(1300 mPa.s)高于商品HPFG和CFG(分别为705和610 mPa.s)的原因是前者相对分子质量较高且残渣含量也较高(~10%,后二者为1%~2%)。HPFG的取代度为0.12,根据文献发表的13C-NMR数据确认HPFG分子链上羟丙基取代位置为C6。讨论了香豆胶(半乳甘露聚糖)的化学结构。热重分析法测定的热稳定性,HPFG高于CFG,CFG又高于FG。图6表3参13。     

溶胶-凝胶生物玻璃多孔材料显微结构和生物活性的扫描电镜及红外光谱分析

本文利用溶胶．凝胶法制备了CaO-P2O5-SiO，系统生物活性玻璃，并以其为原料制备了用于骨修复及骨组织工程支架的块状生物活性材料。利用体外实验方法(invitro)结合x射线衍射(XRD)、扫描电子显微镜(SEM)和傅立叶变换红外光谱分析(FTIR)技术对不同烧结工艺制备的材料结构、晶相和生物活性的影响进行了分析研究。研究表明，经800℃和1100℃烧结5min的两种材料均有硅磷酸钙Ca5(PO4)2SjO4微晶相析出。烧结温度越高，析出微晶相的体积比例越大，材料的生物活性则越低。在模拟生理溶液中碳酸羟基磷灰石(HCA)只在烧结体中的玻璃颗粒表面形成，而在其硅磷酸钙Ca5(PO4)2SiO4微晶相表面未发现HCA形成。     

Measuring and modeling the rheological data of diglycidylether of bisphenol‐A during polymerization for finite element analyses

Finite element analyses (FEA) of thermosets are often performed on the basis of rheological data for fully cured resin. For the FEA of thermosets during curing, a material model is established and a technique is demonstrated, which allows the rheological data of the linear viscoelastic material to be derived. As the moduli are sensitive to conversion, all measured properties are related to temperature and conversion. Therefore the basis for the rheological data has to be a suitable reaction kinetic. Based on the kinetics shear and compression properties are measured independently and modeled mathematically with the focus to gain a formulation, which is suitable for FEA. The considered time constants are in the range between one second and one month as these times are relevant for the investigated relaxation times. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1868–1872, 2003