电火花线切割机3B指令可视化软件的开发

开发了一种基于VBA平台、AutoCAD驱动的3B指令可视化软件，介绍了该软件的功能与开发工具的选择，阐述了软件的设计过程。实践证明该软件有助于提高3B指令编程的正确性与效率。     

Visual C++对Solid Works二次开发技术及应用

介绍了三维CAD系统Solid Works的特点及其API函数,讨论了对Solid Works进行二次开发的关键技术及系统设计,并通过实例阐述了利用Visual C 工具开发Solid Works动态连接库DLL的步骤和编程方法,这有利于对Solid Works进行本地化和专业化的二次开发工作,使其在我国企业中更有效地发挥作用.     

Al4C3的形成及对Gr-Al-Si复合材料的作用

Al4C3的生成会影响Gr-Al-Si复合材料的界面反应，然而研究证明在原料中少量的Al4C3存在，有利于提高石墨分布的均匀性，又不影响该材料的高温抗拉强度等综合性能。Al4C3的形成温度以550～600℃为宜，Al4C3的含量可用X射线定量分析来确定。     

空气-乙炔碳氮氧离子多元共渗工艺研究

用空气-乙炔混合气体作为气源,对40Cr钢进行了离子碳氮氧多元共渗;用光学金相显微镜、X射线衍射仪和显微硬度计,对渗层形貌、物相和显微硬度进行了分析检测。结果表明:乙炔浓度是影响性能的关键因素,它对硬度、物相起着决定性的作用。与常规离子渗氮相比,以空气-乙炔混合气体作为气源的碳氮氧离子多元共渗工艺操作简便,成本低廉。     

ICP-OES法测定氮化硅粉中微量元素Fe、Al、Ca的含量

本文提出了电感耦合等离子体发射光谱法直接测定Si3N4粉中微量元素Fe、Al、Ca含量的分析方法。进行了样品分解试验,考察了基体对测定元素的影响以及各元素间的相互干扰情况,优化了分析条件,各元素的相对标准偏差均在5%以下,回收率为94%～102%。     

Oxidation behaviour of the alloy IC-6 and protective coatings

In this work, NiCoCrAlY coatings were deposited on a new Ni-base alloy, IC-6. The oxidation kinetic curves of alloy IC-6, K17 and NiCoCrAlY coatings on alloy IC-6 at 900-1100 °C were obtained. The results indicated that the oxide scales consisted of α-Al₂O₃, NiAl₂O₄, NiO, as well as a small amount of NiMoO₄ and MoO₂. These scales occurred after alloy IC-6 exposure at 900 °C for 100 h. The weight loss occurred when alloy IC-6 were exposed at 1050 and 1100 °C due to the formation of volatile MoO₃. After the NiCoCrAlY coating was deposited, the scales mainly contained α-Al₂O₃, when the specimens were oxidized at 900 °C, and α-Al₂O₃and Cr₂O₃ at 1050 °C. The formation of α-Al₂O₃ and Cr₂O₃ scales on NiCoCrAlY coating was directly responsible for improving oxidation resistance of the alloy IC-6.     

Activity measurement of gallium in the B2 phase of the CoGa–Sb system by the EMF method with zirconia-based solid electrolyte

Gallium activity in the B2 phase regions of both binary Co–Ga and ternary Co–Ga–Sb systems was measured by EMF method with stabilized zirconia solid electrolyte The temperature range was 1073–1273 K and Sb concentrations were 1, 2 and 3 mol fractions. Ga activity at 1173 and 1273 K increases sharply in Ga rich region and the addition of Sb to the CoGa phase increases Ga activity. Activity change corresponds to the lattice parameter change with Sb addition to the CoGa phase.     

Impact of transient chemistry on the corrosion potential of a steam turbine disc steel

The adoption of two-shifting in coal-fired power generation (switching from on-load to off-load conditions on a daily basis and off-load for the weekend) results in regular cycling of the solution chemistry of the condensed steam on the turbine discs. A first stage investigation has been made of the effect of such chemistry cycling on the corrosion potential of the disc steel. The corrosion potential is typically about +0.05 V (SCE) in off-load chemistry (aerated pure water) and below −0.6 V (SCE) in on-load chemistry (deaerated solution containing chloride or chloride and sulphate anions). The critical observation was the sluggish response of the corrosion potential upon restoration of deaerated on-load conditions with the implication of a likely increase in pit and stress corrosion crack development.     

激光熔覆制备B_4C_p/Ni合金复合涂层的组织与性能

对Ni60合金粉末中添加B4C陶瓷颗粒的激光熔覆组织结构和力学性能做了研究。结果表明,加入陶瓷颗粒可增加熔覆层中强化相数量,提高涂层的硬度和耐磨性,在陶瓷颗粒加入量达到15%时效果最好。     

ZTC4筒形件温成形扩口数值模拟

对铸造Ti-6Al-4V筒形件温成形扩口成形工艺进行了数值模拟分析,得出了优化的工艺参数,并对凸模锥角进行了优化模拟,得出了合适的锥角。