Topology optimization of trusses using genetic algorithm,force method and graph theory

In this article size/topology optimization of trusses is performed using a genetic algorithm (GA), the force method and some concepts of graph theory. One of the main difficulties with optimization with a GA is that the parameters involved are not completely known and the number of operations needed is often quite high. Application of some concepts of the force method, together with theory of graphs, make the generation of a suitable initial population well‐matched with critical paths for the transformation of internal forces feasible. In the process of optimization generated topologically unstable trusses are identified without any matrix manipulation and highly penalized. Identifying a suitable range for the cross‐section of each member for the ground structure in the list of profiles, the length of the substrings representing the cross‐sectional design variables are reduced. Using a contraction algorithm, the length of the strings is further reduced and a GA is performed in a smaller domain of design space. The above process is accompanied by efficient methods for selection, and by using a suitable penalty function in order to reduce the number of numerical operations and to increase the speed of the optimization toward a global optimum. The efficiency of the present method is illustrated using some examples, and compared to those of previous studies. Copyright © 2003 John Wiley & Sons, Ltd.     

烟气轮机叶片应力分析与寿命评估方法评述

烟气轮机是炼油厂催化裂化装置的关键设备,合理预测叶片疲劳寿命是保障烟机安全运行的有效手段。从力学建模和边界条件两个方面简要阐述了叶片的应力分析方法,并系统分析了影响烟机叶片疲劳寿命的主要因素,提出了利用改进的局部应力应变法进行叶片寿命预测的合理性和叶片疲劳寿命的评估方法。     

无钴黑色陶瓷颜料中铬含量测定的新方法

本文以盐酸羟胺作还原剂,研究了三价铬与二甲酚橙的显色反应,结果发现Cr3 在0～80滋g/50ml范围内,其吸光度与Cr3 含量成正比相关,用于无钴黑色陶瓷颜料中铬含量的测定,作出了回归方程,且进行了显著性检验,获得了理想的结果。     

一种有效减少ADI-FDTD数值色散的方法

ADI—FDTD算法的数值色散效应较为明显，本文的研究表明一种通过添加各向异性媒质来修正相速误差，从而减少FDTD数值色散的方法，同样适用于ADI-FDTD，且收效更为显著。数值运算结果证明该方法能够简单有效地去除较宽频带范围内的色散。     

Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology

The application of ion exchange membranes as solid polymer electrolytes (SPE) in fuel cells is state-of-the-art. This technology needs no supporting electrolyte; consequently it can be applied for electro-organic syntheses in order to save process steps. In this case the process is not predetermined to a maximized energy efficiency so that the selection of the cell design, of the electrode materials and of the operating conditions can be focused on a high selectivity of the electrode reactions. The electro-osmotic stream, which is caused by the solvation shells of the ions during their migration through the membrane, and hence is a typical property of SPE technology, has a significant effect on the electrode reactions. It generates enhanced mass transfer at the electrodes, which is beneficial for reaction selectivity. It can be influenced by the choice of, and possibly by the preparation of, the membrane. An additional remarkable advantage of SPE technology is the exceptional long durability of oxide coated electrodes. By combination of several process engineering methods stable operation of SPE cells has been realized, even for examples of non-aqueous reaction systems. Experiments up to 6000 h duration and in cells of up to 250 cm² membrane area show the potential for industrial application.     

PZT陶瓷的断裂分析

与有限元法相比,无网格法由于只需节点不用单元而在压电分析中具有优越性。采用一个简单的包含有极化反转及电饱和影响的锆钛酸铅系压电陶瓷(PZT)的本构模型,以局部J积分作为断裂准则,应用再生核点法这一无网格数值法导出了作用电场与断裂载荷的关系曲线,该曲线的趋势与Park[1]的实验观察现象一致。计算程序采用面向对象方法实现。     

岩石抗剪参数的随机-模糊处理方法在边坡稳定性评价中的应用

结合西南某水电站工程岩石抗剪试验资料，详细、系统地介绍了岩石抗剪参数的随机—模糊处理方法，并编写了相应的处理程序，通过大量计算及对计算结果的灰色关联分析证明应用随机—模糊方法处理岩石抗剪参数样本位比传统方法更符合实际。     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

一种T-S型动态模糊推理模型的建模算法研究

以一种进化聚类算法（ECM）为基础,提出了一种新的T-S型动态模糊推理模型的建模算法.以往许多神经模糊模型都不适用于自适应在线学习,而文章模型能够实时地调整模糊规则库及规则参数,具有较强的在线学习能力.仿真结果表明,该方法是有效的.