浅谈采用短木桩加土工网碎石垫层处理挡墙软基

结合工程实例，对采用传统的短木桩加新兴的土工合成材料——土工网及碎石垫层构成复合基础，处理河岸挡墙软基进行探讨，该方法在软土层厚度不超过4．0m的条件下，技术可靠，施工简单，工期短，造价低。     

Mid-Temperature Synthesis of CeO2-TiO2 Complex Compound and Its XRD Structure Study

TiO2 andCeO2 aresemiconductormaterials .TiO2hasthepropertiesofphoto catalysis[1] whileCeO2 hastheabilityofoxygenstorageandcanpromotethedispersionofprecionsmetalsonthesupporter[2 ] .CeO2 TiO2 com plexcompoundwasusedascatalystandspecialfunction almaterial[3～ 5] .ThetraditionalsynthesisofCeO2 TiO2complexcompoundisbyceramicmethodthatusesoxidesasrawmaterialsanditiscalcinedabove 130 0℃[6～ 8] .However ,thestructureandmicrostructureofthecomplexcompoundarenotsuitableforcatalystandfunctionalm…     

含钡合金的生产及其对钢液脱氧行为的研究

介绍了含钡合金的生产状况。在MoSi2炉上对钢管钢进行了含钡合金脱氧行为的研究，然后在150tLF／VD精炼设备上进行了使用含钡合金的工业试验。研究中主要选取SiAlBa、SiCaBa、SiAlBaCa、SiAlBaCaSr及用于钙处理的SiCa包芯线，并选用Al和FeSiAl作为对比脱氧剂，分别考察了实验室条件下和实际生产过程中，采用钡系合金对钢液脱氧的全氧含量，脱氧产物的分布、尺寸和形貌，探讨了钡系合金脱氧和对夹杂物的变质作用的机理。     

颗粒增强金属基复合材料的干摩擦性能与磨损机理

颗粒增强金属基复合材料(PMMC5)具有优良的耐磨性，在摩擦磨损领域有着广阔的应用前景。本文评述了近年来关于PMMCs干摩擦磨损行为的研究结果，从材料因素和外部条件两个角度分析了各种因素对材料耐磨性、摩擦系数和配偶件磨损的影响，总结了不同条件下复合材料的磨损机制，并提出了设计摩擦磨损性能优良的PMMCs体系的可能途径。     

可焊性高强度钢筋的开发与生产

为进一步开发国际钢材市场，研制开发了符合加拿大可焊性高强度钢筋标准要求的高强度钢筋．制定了化学成分及力学性能内控标准，分析了生产工艺各环节对成分和性能的影响，依据试验结果，在全面统计分析的基础上，调整了冶炼成分，生产的531批钢筋全部合格．通过直方图及回归分析，说明了制定的产品生产工艺可行，也为今后的生产提供了理论依据。     

Experimental and Analytical Behavior of Carbon Fiber-Based Rods as Flexural Reinforcement

This paper presents the results of an experimental and analytical comparison of a study on the flexural behavior of concrete beams reinforced with sandblasted carbon fiber-based composite rods. Twelve beams, including three control beams reinforced with steel, were tested for strength, deformation, and failure characteristics. Analytical comparisons included the generation of the theoretical strength and moment curvature relations. Experimental data from pullout tests indicated that bonding of sandblasted rods is not a major concern. However, excessive deformation in achieving the predicted moment capacity could be a limiting factor in the design of these beams.     

复合内衬在燃油加热炉中的应用

对导热油加热炉炉壁温度升高的原因进行了分析,介绍了新型复合内衬的特点,并对其技术特点、施工工艺及应用效果进行了简单阐述。     

X-Ray Measurement of Residual Stress in Plastic Bonded Explosives

The X-ray diffractive technology was adopted for tentative study of plastic bonded explosive. The datum of some new diffractive peaks in standard PDF cards were added. The effects of strain to interplanar distance and crystal size of the explosive were studied. The results show that grain size of plastic bonded explosive is decreasing with the increasing of the pressure, and the residual stress of the explosive is draw stress.     

复杂结构井的过套管测井技术应用

过套管测井是在已下套管井中完成的用以解决油气层识别、储层物性参数计算为目的的测井系列,在复杂井中用来代替常规的裸眼测井,以便减少在大斜度井中的测井事故,缩短测井周期。本文介绍了几种常用的过套管测井技术,并将其应用于大港油田的庄海401井。结果表明,过套管测井不仅解决了油气层判别的问题,也提供了较准确的物性参数,同时降低了施工作业的难度,缩短了占井周期,这一点对海上钻井尤为重要。     

对ADSL接入方式铜缆可用线对率的分析

指出了为发展ADSL而提高市话音频铜线电缆的传输质量和维护水平的必要性,分析了铜线电缆线对有关指标参数低劣的原因和对传输ADSL的影响,并提出了一些改进的意见。