辅助电流对Cu/Al大功率超声波焊接的影响

为获得更高质量的Cu/Al异质金属接头，开展了Cu/Al电流辅助大功率超声波焊接工艺试验，研究了辅助电流对Cu/Al超声波焊接的界面温度、材料塑性流动、界面中间相分布及接头力学性能的影响。结果表明，复合焊件成型良好，其接头抗拉剪力为3030 N，接头的断裂模式为韧性-脆性复合断裂。在同样的焊接时间0.2 s内，随着电流的增大，Cu/Al界面温度增加，金属塑性流动以及界面扩散也随之增强，这说明辅助电流能明显促进界面冶金；相比长时间0.4 s的超声波焊接，辅助电流能在保证界面温度、材料塑性变形的前提下，能明显减薄了界面IMC层的厚度，这是电流增强Cu/Al接头的主要物理机制。研究结果为优化Cu/Al复合焊接头强度提供了参考。     

Effect of lactic acid bacterial fermentation on amino acids and volatile compounds of pork trimming hydrolysate

The objective of this research was to improve the volatile flavour profile of a pork trimming hydrolysate by lactic acid bacteria (LAB) fermentation. Five probiotic strains and one dairy strain were used. The dominant aliphatic aldehydes (80.90%) in the unfermented hydrolysate were greatly reduced to <15% by converting into respective carboxylic acids and alcohols after fermentation. Strain GG was the only LAB that produced a significant level of succinic acid (1.62 mg mL⁻¹) and ketones (14.92%) (mainly diacetyl and acetoin) in the hydrolysate. Strains 299V and GG showed moderate proteolytic activities as their amino acid content reduced to 126.05 and 219.14 mg per 10 mL compared to the control (316.45 mg per 10 mL) after fermentation, respectively. However, little amino acid-derived volatiles were found in all fermented samples. These findings indicate that LAB fermentation modulates the flavour compounds of pork hydrolysates, which has the potential to be developed to novel flavouring materials.     

Indoor levels of volatile organic compounds at Florentine museum environments in Italy

Indoor Air Quality monitoring in cultural institutions is of particular concern to protect these places and the cultural heritage content. An indoor monitoring campaign was performed in three museums in Florence (Italy) to determine the occurrence and levels of volatile organic compounds (VOCs). VOCs of interest included BTEX (benzene, toluene, ethylbenzene, xylenes), terpenes, aldehydes, organic acids, and cyclic volatile methyl siloxanes (cVMS). The most abundant VOCs in all samples analyzed were BTEX, which were strictly related to the traffic source, followed by siloxanes and terpenes. Among BTEX, toluene was always the most abundant followed by xylenes, ethylbenzene, and benzene. cVMS in exhibition rooms with the presence of visitors showed higher values compared to samples collected when the museums were closed. Terpenes showed not only the influence of vegetation-biogenic sources surrounding a museum but could also be related to the wood used for the construction of showcases and furniture and the use of cleaning products. Data obtained also showed the presence of organic acids and aldehydes whose source can be traced back to exhibits themselves and wood-based furniture. Assessing the levels of organic acids in museums is important because, over time, it can cause deterioration of the artifacts.     

超高效液相色谱-串联质谱法检测多基质保健食品中27种非法添加降糖类化合物

目的 建立超高效液相色谱-三重四极杆质谱检测保健食品中27种降糖类非法添加化合物的方法。方法 4种不同基质保健品样品经甲醇超声提取后，采用Waters XBridge Amide色谱柱 (2.1 mm×100 mm, 3.5 μm)，以5 mmol/L甲酸铵水溶液和5 mmol/L甲酸铵乙腈作为流动相进行梯度洗脱，分离苯乙双胍、二甲双胍、伏格列波糖、阿卡波糖、丁二胍共5种化合物；采用Waters CORTECS T3色谱柱 (2.1 mm×100 mm, 2.7 μm)，以0.1%甲酸水溶液和乙腈作为流动相进行梯度洗脱，分离维达列汀、罗格列酮、西他列汀、吡格列酮等22种化合物；环格列酮采用电喷雾离子化负离子模式，其余26种化合物采用电喷雾离子化正离子模式，以多反应监测方式进行检测。结果 伏格列波糖、阿卡波糖、达格列净、卡格列净、曲格列酮、环格列酮6种化合物在250 ng/mL~12.5 μg/mL范围内线性关系良好，其余21种化合物在5~250 ng/mL范围内线性关系良好，线性相关系数r均大于0.99；27种化合物检出限(limit of detection, LOD)范围为1~1000 μg/kg；在低、中、高三水平加标，其回收率均在70%~120%范围内，相对标准偏差(relative standard deviation, RSD)为0.7%~10% (n=6)。结论 本方法快速、灵敏、高效、准确，适用范围广，可用于保健食品中降糖类化合物的高通量检测。     

Development of insertion-type peristalsis pump using pneumatic artificial muscles

This study aims to develop a new type of peristaltic pump that transports high-viscosity and solid–liquid mixture fluids. Pumps capable of transporting such fluids are essential in various situations such as factory transportation, outdoors, and emergencies. These fluids are conventionally transported by positive-displacement and rotodynamic pumps. However, solid–liquid fluids could collide with the impeller of the rotodynamic pump and thereby damage the pump, whereas the positive-displacement pump must be sufficiently large to apply high pressure to the transported fluid. A small pump that can transport these fluids would save factory space and enable outdoor applications such as dredging operations. Thus, we adopted earthworm peristalsis as a model mechanism of fluid transport within a standard plumbing infrastructure. The insertion-type peristaltic pump developed in this study uses an artificial rubber muscle to achieve an earthworm-like mechanism. The capability and energy efficiency of the mechanism is evaluated in water transportation experiments.     

稀土晶体材料研发现状与未来展望

介绍了稀土晶体的科学内涵,包括稀土晶体的概念、学科特色和分类。阐述了稀土晶体材料的研发现状,包括稀土磁学材料、光学材料、电学材料、催化材料、能源材料、合金材料以及稀土原料。指出中国已建成从稀土矿产勘探开采、选矿、萃取、分离、冶炼等稀土原材料生产技术到下游稀土结构与功能材料研发和工业生产体系,形成了全球门类最齐全、规模第一的稀土新材料产业体系,但是仍未系统掌握稀土高技术材料和器件领域的核心技术。针对创新引领能力不足、稀土资源高端利用能力不强等系列问题,中国还需要在基础科学研究、应用基础研究、产业发展、资源回收等方面进一步加强战略规划。     

白云鄂博矿焙烧浸出-萃取沉淀分离稀土及钍的试验研究

采用焙烧浸出-萃取沉淀法从白云鄂博稀土精矿中分离稀土和钍,得到最佳焙烧浸出条件为: 矿酸比1∶1.5、焙烧时间1 h、焙烧温度200 ℃、水浸液固比8∶1、水浸时间4 h、水浸温度50 ℃,最佳条件下CeO₂、La₂O₃、Nd₂O₃、Pr₆O₁₁、Sm₂O₃和ThO₂浸出率分别为80.77%、69.24%、95.71%、76.82%、93.31% 和98.13%。采用羧酸类萃取-沉淀剂从浸液中萃取分离稀土和钍,在萃取-沉淀剂皂化度70%、料液pH=3.1、萃取-沉淀剂和钍的摩尔比4∶1的最佳条件下,稀土和钍萃取-沉淀率分别为19%和90%,实现了稀土和钍的有效分离。