应用硫酸铵提高乌拉嗄金矿石浮选回收率试验研究

经试验发现应用一种化学肥料硫酸铵可以显著提高乌拉嘎金矿石的浮选回收率。闭路试验尾矿工艺矿物学鉴定证明，以硫酸铵作为调整剂的浮选过程中，微细粒单体金和金与石英边生体被有效回收。     

Rolling contact fatigue behavior of sintered and hardened steels

Powder-metal-processed bearings and gears are finding increasing application because of their economical and technical advantages. The residual pores from the sintering operatives act as lubricant pockets and dampen sound and vibration. However, porosity also decreases the mechanical strength and reduces the life of components fabricated by powder processing relative to similar wrought components. The rolling contact fatigue behavior of sintered and heat treated steel rollers was investigated using a fatigue test machine designed and fabricated for that purpose. The powder-metal-processed and the wrought steel rollers that were tested had similar composition and hardness and were mated against wrought steel rollers of high hardness. The contact stress versus number of cycles to failure data showed that the wrought steel had a very high endurance limit under rolling contact fatigue compared to the sintered steels investigated. Rolling contact fatigue behavior was found to depend on the porosity present in the material. Large surface peeling failures and pitting type fatigue failures were observed in the sintered and hardened steels, while only pitting type failures were observed in the wrought steels     

优化锰铁高炉配矿结构

介绍了通过优化高炉锰铁烧结矿原料结构，改善了烧结矿性能，使锰铁冶炼取得了增产、节焦、降成本的明显效果。     

广西天等贫氧化锰矿石的选矿试验研究

天等锰矿石属高硅、低磷贫氧化锰矿石，矿物结晶粒度微细。选矿试验中进行了洗矿、强磁和重选流程研究，试验结果表明，洗矿效果较好，当原矿含锰１６．８５％，经一段洗矿后，可获得含锰２９．７７％，锰回收率为８６．２７％的锰净矿。     

Investigation of the Effects of some Parameters in the Production of Chromate from Chromite Ores in Iskenderun Region

The conversion of chromite ore from iskenderun region into chromate was investigated. Firstly, the chromite ore was analysed using conventional chemical methods. Then, the effect of some parameters such as roasting time, temperature and the amount of additives on the conversion efficiency to the chromate was examined. The optimum roasting conditions were determined as 300°C, 2 hours, 10 times the stoichiometrically required amounts of NaClO₃ and 6 times the stoichiometrically required amounts of KOH. Under these conditions, the maximum recovery of chromate was found to be 100%. The product obtained from the roasting process was leached with water to produce a clean chromate solution. The effect of temperature and solid/liquid (S/L) ratio was investigated in the water leaching experiments. The optimum experimental results obtained were 100% at a 1:5 solid to water ratio at 25°C and 20 min leaching period. The chromate solution was purified using conventional purification processes.     

房柱法在斗南锰矿缓倾斜极薄矿体的试采

本文介绍了房柱法在斗南锰矿缓倾斜极薄矿体(厚度小于1.2m)中的试验情况。经试采证明,该方法是回采缓倾斜极薄矿体的一种有效方法。采场生产能力可达48t/d,矿房回采率为87.1％,矿块回采率为80.4％,废石混入率为9.3％。采用了预裂爆破、松动爆破和抛掷爆破技术,对减少粉矿以及矿石的贫化和损失,起到了很好的作用。     

大比例配用进口粉矿的烧结试验及生产

安钢烧结厂为应对原料条件的变化，就烧结配加进口粉矿进行了试验。以试验结果指导生产，顺利地实现了原料结构的改变，以及工艺参数的优化和生产指标的改善。     

干磨干选工艺在赤城选矿厂中的应用

赤城鑫宇选矿厂工艺流程设计中采用了干磨干选的新工艺，用来处理全铁品位为13％左右的原矿。该工艺中将原矿用干式棒磨机磨至4mm～0mm，然后进行干式磁选甩尾，甩尾产率达到36％，甩尾后原矿TFe位可达到18％，提高了入湿磨、选别的品位，有效地降低了下段磨矿的费用。该工艺投入运行后，生产情况良好。     

攀枝花矿产资源特征及循环经济发展策略探讨

文章着重描述了攀枝花矿产资源特征、资源矿物流向和资源产品定位，分析了资源矿物使用行业的不同特点，明确了针对攀枝花矿产资源利用的循环经济目标，根据资源循环利用技术水平和资源循环开发现状，提出了攀枝花矿的循环经济发展策略.     

Numerical Simulation of Independent Advance of Ore Breaking in the Non-pillar Sublevel Caving Method

The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.