聚合磷硫酸铁制备及净化含铅废水的试验研究

以钛白粉副产品绿矾为主要原料,氯酸钠作氧化剂,调节亚铁离子与硫酸根离子之间摩尔比后微波作用仅几分钟就能合成出液体聚合硫酸铁,并在此基础上加入磷酸根离子可得到所需絮凝剂--聚合磷硫酸铁;试验了该絮凝剂最佳合成工艺条件;采用该试剂净化含铅废水,取得了较好去除效果,并且探讨了除铅最佳试验条件.     

Organic Electroluminescent Thin Film Using 8—hydroxyquinoline Zinc as Emitting Layer

Organic electroluminescent thin film using Znq2(Znq2) as the emitting layer material with structure of glass/ITO/Znq2/Al(cell) was fabricated.The V-I curve ,V-B curve and electroluminescent spectra of the cell were measured.Meanwhile the fluorescent spectra, excited spectra and absorption spectra of Znq2 with power and film states were also measured.     

3#大布袋收尘器更新改造方案的探讨

通过对3^#大布袋收尘器更新改造方案的对比分析，探讨适合工艺条件的最佳收尘器的选择途径。     

复合功能原理方案特征建模及其求解过程研究

研制了驱动、传动和分离等典型功能原理方案解的知识库，建立了复合功能产品原理解的特征模型，提出了复合功能原理求解的通用进`生平注解和接口匹配并行的策略，进而提出原理解接口特征的嵌套结构及其匹配进程，开发了一个复合功能产品原理方案求解的计算机支持平台，进行了实例验证。     

ZRS-6.72-3型电收尘器技术改造

ZRS-6．72—3型电收尘器原设计用于13．8kt／a锌冶炼烟气收尘制酸工艺中，因电收尘器使用时间长，电源控制柜故障率高和沸腾炉扩大更新，对电收尘器同步进行配套技术改造。改造为CRS-8．24—3型电收尘器后，又陆续使用了HL-Ⅲ型恒流源控制电柜，投产后的电收尘器具有收尘效率高、电场运行稳定等特点。     

降低氧化铝生产中熟料折合比的探讨

在氧化铝生产过程中，熟料折合比是烧结法一项重要的综合性指标，本文通过对熟料折合比的定义、计算公式的剖析，分析了生产过程中影响熟料折合比的主要因素，对有效降低熟料折合比的措施进行了探讨。     

聚硅酸铝在钻井废水处理中的应用

简单介绍了聚硅酸盐絮凝剂的研究现状,并在室内合成出絮凝剂样品聚硅酸铝,将其应用于钻井废水处理,结果发现,由于聚硅酸铝的电中和能力强,吸附架桥和卷扫作用均优于PAC,具有更好的去除COD和脱色功能.     

Water-soluble copolymers: 22. Copolymers of acrylamide with 2-acrylamido-2-methylpropanedimethylammonium chloride: Aqueous solution properties of a polycation

The viscometric, turbidimetric and potentiometric properties of copolymers of acrylamide (AM) with 2-acrylamido-2-methylpropanedimethylammonium chloride (AMPDAC) were studied in aqueous solutions. The AMPDAC polymers exhibit poor salt tolerance and large, negative viscosity/temperature coefficients. Furthermore, the polymers were found to be sensitive to changes in pH. The AMPDAC polymers undergo phase separation in the presence of dianions as a function of temperature and AMPDAC composition.     

Preparation of ultra-fine copper powder and its lead-free conductive thick film

In this paper, non-agglomerated monodispersed ultra-fine copper metallic powders have been synthesized with chemical reduction method. Fine lead-free glass powders were also prepared by solid synthesis process. Thick film paste prepared by above-mentioned copper metallic powders and lead-free glass powders was applied as conductive paste of MLCC. Mixture of glass and zinc oxide give the thick film a high adhesion strength which is attributed to the rough interface from interfacial reaction between glass and chip, and a good densification. Diffusion of metal between copper thick film and nickel thick film is clear. Ni-Cu solid solution appears under high temperature firing.     

外转子电机关键技术及解决措施

对外转子电机的关键技术和主要工艺问题进行了探讨分析，并提出了解决措施。