如何延长高压液相色谱柱的使用寿命

分析了液相色谱柱失效的诸多现象和原因，并论述了极性溶剂冲洗法等一些使色谱柱恢复活性的方法。     

Phase equilibria in InAsSbP quaternary alloys grown by liquid phase epitaxy

The quaternary alloy InAs_1−x−ySb_xP_y, lattice-matched to InAs, is a promising material for the production of infrared light sources for the detection of gases in the 2–4 μm region of the spectrum. In this work, thermodynamic phase equilibrium calculations have been carried out to determine the compositions required for liquid phase epitaxial growth and the extent of the miscibility gap in the solid material. For high band gap materials, the desired growth temperature is found to be intermediate between a low temperature required to grow P-rich solids and higher temperatures required to avoidspinodal decomposition. Conventional LPE growth at an intermediate temperature of 583°C is found to produce good material with high luminescence efficiency and excellent optical characteristics. Problems with phosphorus loss from the melt are also discussed and lower growth temperatures are found to considerably reduce this problem. Growth in the metastable region between the binodal and spinodal lines has been achieved with the production of phosphorus-rich solids with concentrations up to y = 0.445.     

MIS型单晶硅液晶光阀

详细介绍了一种新颖、快速响应的金属－绝缘层－半导体构成的MIS型单晶硅液晶光阀的结构、工作机理、制作工艺和性能参数测试。液晶采用45°扭曲向列型混合场效应工作模式。所得到的光阀的极限分辨率为40lp／mm，口径40mm，最大对比度＞100：1，在930nm（△λ＝40nm）写入光灵敏度为20μW／cm2，响应时间为15ms。报道了该光阀在大屏幕投影显示中的应用。     

固体推进剂中有关粒度分布的数学处理

介绍了固体推进剂中有关颗粒度分布的数学处理方法，用几种数据统计分析的理论分布函数－正态分布，对数－正态分布，Ｋ分布，并以铝粉和含铝推进剂燃烧残渣的颗粒分布为例进行了分析，根据Ｃｕｌｉｃｋ微粒阻尼的理论计算模型，讨论了粒度分析在阻尼效应计算中的应用。     

热致液晶性纤维素衍生物及其热塑性塑料复合物熔体流变行为的研究

用毛细管流变仪研究了乙基纤维素（ＥＣ）及其高密度聚乙烯（ＨＤＰＥ）复合物，纤维素芳族酯（ＣＡＥ）及其聚碳酸酯（ＰＣ）复合物的剪切流变特性和机理。结果表明，ＥＣ对ＨＤＰＥ／ＥＣ复合物的粘度影响不大，而少量（５％）ＣＡＥ的加入使ＰＣ／ＣＡＥ复合物粘度大大下降，且复合物流变曲线呈现新的特征。     

液体火箭发动机研制情况的一些回顾

４０年来，我国液体火箭发动机的研制工作取得了很大成绩。文中对发动机的一些研制情况作了回顾，对ＹＦ－７３和ＹＦ－７５氢氧发动机的设计特点、飞行结果作了简单叙述。对今后工作也提出了看法。     

半导体ZnTe/GaAs界面层错的高分辨显微分析

本项研究对经热壁外延（ＨＷＥ）生长在ＧａＡｓ基底上的ＺｎＴｅ进行分高分辨显微结构的观察，在ＺｎＴｅ／ＧａＡｓ界面上不仅存在着混合型全位错的扩展，而且首次发现类似螺旋位错分解的层错，并将其归结为原子在不全位错之后的堆积。     

高装填密度装药技术中的选药计算

本文围绕叠片药这一装药技术,对某炮进行了有关选药计算,研究了制式火药与叠片药之间的弧厚配比和质量配比关系,并得出了一些有实用价值的结论.     

Two dimensional deformation characteristics of bloom CC with liquid core reduction

A two-dimensional model was applied to simulate the liquid core reduction(LCR) technology of bloom CC using ANSYS software.The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained.The results indicate that the main deformation condition of bloom shell is compressive strain,mainly undertaken by the liquid core,which increases with the enhancement of reducing amount.Solidified shell takes minor deformation.The longitudinal section of bloom appears sunken and the narrow side bulges,which grow serious when the liquid fractionincreases.     

胆甾相液晶的光学特性

基于胆甾相液晶的特殊分子结构，综合阐述了胆甾相液晶的旋光性、选择性光散射和偏振光二色性等光学特性，揭示了它的光学特性主要源于它螺旋状的分子结构及其光学各相异性。