在文明寨地区的高精度地震资料处理实践

文明寨地区构造复杂，断块多，岩性变化大，一些地质问题不明，需要高精度三维资料处理来提高资料的纵、横向分辨率^[1][2]及为储层、油藏研究提供精确的依据。针对东濮文明寨地区高精度处理过程中的关键技术进行了大量分析试验，形成了一套适合东濮地区的较为完整的3D高精度地震资料处理流程。实际资料处理表明效果较好。     

Preparation and catalytic performance of Co3O4 catalysts for low-temperature CO oxidation

Without use of any surfactant or oxidant, a series of Co₃O₄ catalysts have been prepared from cobalt nitrate aqueous solution via a very simple liquid-precipitation method with ammonium acid carbonate followed by calcination at various temperatures. The catalytic performance of the Co₃O₄ for CO oxidation has been studied with a continuous flowing laboratory microreactor system. The results show that the CO conversion of all the samples can reach 100% at ambient temperature. The catalyst calcined at 300 °C is able to maintain its activity for CO complete oxidation more than 500 min at 25 °C and about 240 min even at −78 °C. High reaction temperature results in a high catalytic stability, while the catalytic stability decreases with further increasing the reaction temperature. Characterizations with X-ray powder diffraction and transmission electron microscopy suggest that all the samples exist as a pure Co₃O₄ phase with the spinel structure, the samples are apt to aggregate and the specific surface area gradually decreases with increasing the calcination temperature, which directly leads to the decrease of catalytic stability. Furthermore, the amount of active oxygen species measured by CO titration experiments appears to be critical for catalytic performance.     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

隔膜电解制备Mn^3＋的研究

对电解媒质ＭｎＳＯ４在有隔膜条件下电解制备Ｍｎ３＋过程进行了研究。结果表明，无论均相还是非均相隔膜电解，在常温２０℃、４０％Ｈ２ＳＯ４介质中，当电流密度、ＭｎＳＯ４浓度、电解时间在很宽的范围变动时，电流效率保持很高，至少在８５％以上。     

Coking kinetics of a Cr2O3/Al2O3 catalyst during 1-butene dehydrogenation: Effect of H2 partial pressure

The influence has been studied of the partial pressure of hydrogen (0–30 kPa) upon the coking rate of a Cr₂O₃/Al₂O₃ commercial catalyst during 1-butene dehydrogenation. Coke deposition has been analysed using a monolayer-multilayer reversible coke growth model (MMRC model). This model provides good fits to the experimental data, within the range of partial pressure of H₂ studied, and allows us to estimate the main kinetic parameters involved in the coking-deactivation process. The results obtained reveal a dual effect of hydrogen: competition against 1-butene for the active sites and the removal of coke precursors from the catalyst surface. Bom effects diminish the coking rate as the H₂ partial pressure is increased.     

中国人丙型肝炎病毒全长NS3基因的克隆、序列分析及表达

目的　为改进HCV试剂的质量克隆 1b型丙型肝炎病毒 (HCV)全长NS3基因并在原核细胞中表达。方法　用RT PCR方法从中国人血清中扩增全长NS3片段 ,进行序列分析 ,并克隆到pET3 0a(+)原核表达载体中 ,构建的原核表达载体pET NS3 180 0在大肠杆菌BL2 1(DE3 )中表达 ,用Westernblot方法进行验证。结果　扩增到 1b型HCV全长NS3片段 ,经Westernblot实验表明该片段具有抗原活性。结论　构建的质粒可在大肠杆菌中表达完整的NS3蛋白     

麝香草酚和二磺酸酚分光光度法测定NO-3-N的比较

文章对两种测定NO3^-－N的方法从灵敏度、去Cl^-、NO2^-的干扰能力及实际操作作了比较，并提出了用麝香草酚测定NO3^--N应注意事项。     

Ni/Al_2O_3覆膜方法

阐述了Ni/Al2 O3 复合颗粒在生产中的应用 ,讨论了在Al2 O3 陶瓷颗粒上形成Ni膜的三种方法 ,分析了这些方法的优缺点。     

rGO-SnO2纳米复合物制备及室温下NH3气敏性能

采用沉淀-焙烧法制备了室温下对NH3具有高灵敏度和高选择性的rGO-SnO2纳米复合材料。利用X射线衍射（XRD），傅里叶红外光谱（FTIR），X射线光电子能谱（XPS），扫描电子显微镜（SEM），透射电子显微镜（TEM）和比表面积（BET）表征分析了纯SnO2与rGO(1.0%)-SnO2纳米复合物的属性。与纯SnO2相比，rGO(1.0%)-SnO2纳米复合物中SnO2晶体尺寸较小，约为6~20nm，比表面积更大，为33m2/g；rGO(1.0%)-SnO2纳米复合材料对0.01% NH3的灵敏度达到了49.6%，是相同NH3浓度下纯SnO2灵敏度的2.1倍，并且响应和恢复时间分别为21s和204s，比纯SnO2缩短了24s和10s，具有良好的重复性，选择性与稳定性；rGO(1.0%)-SnO2纳米复合材料优良的气敏性能是由rGO与SnO2产生的p-n异质结以及溶解的NH3电离出导电离子共同作用的结果。     

甲苯稀释对AlCl3-EMIC型离子液体电镀铝工艺氢脆性的影响

采用甲苯作为AlCl3-EMIC(1-乙基-3-甲基咪唑)型离子液体的稀释剂,其中纯态离子液体由物质的量比为2∶1的无水AlCl3和EMIC组成。对比了纯态和按稀释剂与离子液体体积比为1∶1稀释后电镀铝的外观、微观形貌和氢脆性。结果表明,采用甲苯稀释离子液体虽然可以降低镀液的黏度,改善镀层外观和微观形貌,但对离子液体电镀铝工艺的氢脆性有负面影响。