关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

红外研究丁羟二异氰酸酯的固化反应动力学

用红外分光光度计研究了端羟基聚丁二烯(HTPBD)与二异氰酸酯的反应动力学,结果表明,NCO与OH的反应为二级动力学反应,由于位阻效应和共轭效应,MDI比TDI的反应活性大得多,前者的反应速率常数大约是后者的10～20倍。反应速率常数及活化能随NCO的过量而有所变化。在NCO过量体系中。TDI-HTPBD体系中有次级反应发生,由于氢键的作用,次级反应为对于氨基甲酸酯基为二级、NCO为一级的三级反应动力学.由于位阻效应,MDI体系很难发生次级反应。     

苯并口恶嗪-环氧化合物-胺类催化剂体系开环聚合反应的研究

采用TLC，GPC，1H－NMR及IR等分析方法，对苯并恶嗪－环氧化合物－胺类催化剂体系的聚合反应进行了研究，表征了产物结构，并探讨了聚合反应机理，结果表明，苯并恶唪－环氧化合物体系在胺类催化剂如苄胺，咪唑的作用下，能发生开环聚合反应，生成低分子量的聚合物。     

化学反应和气相色谱法联合测定含烯汽油中共轭二烯烃含量

建立了利用共轭二烯烃与马来酸酐的Ｄｉｅｌｓ－Ａｌｄｅｒ特性反应和１ｍ×１．７ｍｍ（ｉｄ）非极性固定液ＳＥ－３０填充柱气相色谱法联合分析含烯汽油中的共轭二烯烃含量的方法。该柱能用低碳数的正构烷烃如正十一烷作内标物，内标物与油样组份分离很好，色谱分析一次４ｍｉｎ，油样的相对标准偏差为１．７％。在一定的化学反应条件下，用Ｉ２和ＡｌＣｌ３作催化剂，当Ｉ２、ＡｌＣｌ３与共轭二烯烃的物质的量比分别为０．８×１０－５和（１～２）×１０－３时，异戊二烯有最高的转化率分别为６８．５１％和９８．１８％，回流反应装置的挥发损失率为０．２８％。     

Xylose-lysine model systems: The effect of pH on the volatile reaction products

Aqueous molal solutions of xylose and lysine (initial pH 4–9) were refluxed either with control of the pH at 5–0 or without pH control (final pH 2–6). Analysis by gas chromatography (GC) and GC-mass spectrometry resulted in the identification of 58 and 28 compounds, respectively, from the two systems. Furans were the main reaction products in both systems and 2-furfural alone comprised 522 and 999 g kg^?1 of the volatiles, respectively, from the systems with final pH values of 5–0 and 2–6. Maintaining the pH at 5–0 resulted in a higher yield and greater numbers of nitrogen-containing compounds, and monocyclic pyrroles, pyridines and 2,3-dihydro-l H-pyrrolizines were identified only in that system. Aliphatic compounds, alicyclic compounds, benzene derivatives. l-(2–furfuryl)pyrroles and pyrazines were also identified. This investigation is the first report of the formation of 2.3-dihydro-l H-pyrrolizines in a model system containing lysine as the amino compound; a possible mechanism is proposed.     

反应自生Al_3Ni－Al_2O_3－Al复合材料

通过热力学计算，选择Ｎｉ_２Ｏ_３粉末作原材料，采用反应挤压铸造方法实现了Ａｌ与Ｎｉ２Ｏ３直接压铸反应合成Ａｌ３Ｎｉ－Ａｌ２Ｏ３－Ａｌ原位复合材料。研究了压铸工艺参数和预制块中纯Ａｌ粉的含量对反应合成复合材料过程的影响，并对反应机理做了较深入的分析。结果表明，Ｎｉ２Ｏ３与Ａｌ的反应是为高放热反应，反应是爆发式的，通过调整预制块中Ａｌ粉的体积分数控制了反应的剧烈程度，并能获得不同组成和基体含量的复合材料。对反应机理的分析表明，在Ａｌ足量的情况下，Ｎｉ２Ｏ３与Ａｌ反应合成复合材料分为两个过程，一是反应过程，即Ｎｉ２Ｏ３＋Ａｌ→Ａｌ２Ｏ３＋［Ｎｉ］；二是凝固过程，即反应后多余的Ａｌ与反应生成的［Ｎｉ］在随后冷却中的凝固过程，最终形成Ａｌ３Ｎｉ＋α－Ａｌ２Ｏ３＋Ａｌ复合材料。     

新取代苯基荧光酮试剂的合成及其性质的研究Ⅱ．新型取代苯基荧光酮与金属离子显色反应的研究

研究了３，５－二溴－４－氨基苯基荧光酮、３，５－二溴－４－偶氮变色酸等８种苯基荧光酮在酸性介质中与高价金属离子Ｚｒ（Ⅳ）、Ｍｏ（Ⅵ）、Ｗ（Ⅵ）、Ａｌ（Ⅲ）、Ｇａ（Ⅲ）等的显色反应。３，５－位二溴取代的试剂的灵敏度高于未取代的灵敏度，摩尔吸光系数绝大多数在１０５Ｌ·ｍｏｌ－１·ｃｍ－１以上。     

Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

APPLICATION OF THE POLYMERASE CHAIN REACTION TO THE RAPID ANALYSIS OF BREWERY YEAST STRAINS

The rapid discrimination of closely-related Saccharomyces cerevisiae strains can pose a significant problem to breweries, in particular where closely related strains are being used simultaneously to manufacture different products. In this study, two PCR approaches have been examined to assess their usefulness for the discrimination of brewery ale and lager yeast strains. PCR using arbitrary primers (RAPD PCR) was found unsuitable for such an application since the DNA profiles generated from brewery strains were generally found to be identical, due presumably to the close genetic relatedness of these yeasts. In contrast, PCR using δ sequence primers could rapidly differentiate between many ale and lager strains and characteristic profiles for these were generated. This method could also be applied directly to yeasts isolated from brewery worts or from active dried yeast preparations. Results of such analyses were available within the working day.     

酸催化二甘醇脱水环化反应研究

以硫酸、磷钨酸、ZRP-5分子筛为催化剂,研究了二甘醇(DEG)脱水环化的反应规律。结果表明,DEG发生分子内脱水环化反应,生成1,4-二氧六环(DOX),DEG分子间脱水不仅可以生成四甘醇、六甘醇等,同时可生成三甘醇、五甘醇等一系列的多甘醇(PEG)。不仅DEG可以脱水环化生成DOX,在反应中生成的PEG也同样可以进行生成DOX的反应。对于二甘醇(DEG)脱水环化反应,硫酸是性能优良的催化剂,反应可以在较低的温度下进行,馏出产物中DOX选择性大于95％。