自身蓄热式烧嘴在梭式窑中的应用

介绍了高温空气燃烧技术和自身蓄热式烧嘴的特点;结合梭式窑的工作特点,详细阐述了在梭式窑中推广使用自身蓄热式烧嘴的优越性。采用该技术,可以大量回收高温烟气的余热,从而既能提高加热能力、减少能耗和降低燃料成本,又可以促进炉内温度的均匀性。通过优化自身蓄热式烧嘴,还可以减少有害气体的排量。因此,在梭式窑中推广使用自身蓄热式烧嘴具有良好的经济效益和社会效益。     

基于Java框架的银医一卡通系统设计

介绍了一种基于信息共享的医院--银行一卡通的信息系统设计方案。该系统使用Web服务实现接口通信,通过自助服务器连接医院系统和银行系统实现医院与银行的信息共享。基于该系统,用户可以使用中国银行借记卡代替医院门诊卡就医,提供了良好的就医环境,提高了医疗效率。     

Self‐assembling metal coatings from phosphated and siloxane‐modified polyurethane dispersions: An analysis of the coating–air interface

Polyurethane dispersion coatings containing phosphate and siloxane chains were evaluated for their self‐assembling properties for a single‐coating system. Dynamic contact angles (DCAs) and X‐ray photoelectron spectroscopy (XPS) were used to study the coating–air interface. The siloxane chains were the predominant species on the surfaces of the coatings. The wetting properties of the coating–air interface were reversed when the coated panels were immersed in an ionic solution, and the decrease in hydrophobicity was linear with time. Results from XPS and DCA analyses were similar. The self‐assembling properties of the coatings could be useful in the development of hydrophobic coatings from hydrophilic polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 893–899, 2003     

传热设备自动清洗纽带的开孔结构优化研究

对设有开孔结构的自转清洗纽带进行了传热特性及流阻特性研究。结构优化试验的结果表明 :摩擦阻力和传热强化都随开孔面积比率的增大表现出先上升后下降的趋势 ,传热强化的幅度在 2 %— 18%之间 ,摩擦阻力系数在开孔率 18%时最大 ,其中 7#开孔比率纽带的综合性能最佳。因此 ,这种开孔结构的纽带更宜用于中低Re工况下应用 ,在 2 .0m/s以上的高流速工况下应采用高开孔率结构的纽带或螺旋带     

Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

无三苯CR/SBS/MMA/BA自交联鞋用胶粘剂的研制

采用复合引发剂 ,以N 羟甲基丙烯酰胺 (NAM )及丙烯酸 (AA)为功能单体 ,与CR、苯乙烯 丁二烯嵌段共聚物 (SBS)、甲基丙烯酸甲酯 (MMA)和丙烯酸丁酯 (BA)进行多元共混接枝共聚 ,再配以混合型增粘树脂 ,研制出不含苯、甲苯和二甲苯 (简称三苯 )自交联环保型鞋用胶粘剂。探讨了SBS用量、MMA/BA配比、功能单体NAM及AA用量对胶粘剂粘合性能的影响。结果表明 ,CR/SBS/MMA/BA/AA/NAM自交联型接枝胶粘剂对非极性鞋材的粘合性能明显优于CR/MMA/BA三元接枝胶和CR/SBS/MMA/BA四元接枝胶。     

Effect of Resins on Asphaltene Self‐Association and Solubility

In previous studies, asphaltenes and resins have been treated as two distinct fractions of a crude oil. The asphaltenes were assumed to be the only self‐associating fraction. However, there is evidence that resins also participate in this self‐association. In this study, molar masses of mixtures of asphaltenes and resins were measured with vapour pressure osmometry. Precipitation from the same mixtures dispersed in solutions of toluene and pentane were also measured. The data were modelled with previously developed self‐association and precipitation models. Model results with asphaltenes and resins characterized as a single distribution and as individual components are compared. The data and the modelling suggest that asphaltenes and resins are better characterized as a single distribution of self‐associating components.     

事故氯处理装置低压供电系统可靠性的改进

介绍了烧碱生产中的废氯气和事故状态下的氯气处理装置中低压供电系统的自投、自复、应急电源在生产中的重要作用、控制原理和存在问题，以及改进措施。     

基于折射定律的摄像机标定模型

传统的摄像机标定是基于针孔模型,把镜头简化为凸透镜,得出的是光学元件的集总参数,精确度低.为提高精度,根据折射定律提出基于折射定律的摄像机标定模型.上述模型细化了摄像机镜头的组成,把镜头分为三个透镜部分,并且应用折射定律定性研究光线在透镜边界面的折射情况.改进模型充分考虑了摄像机镜头的透镜组成,大大提高了标定的精确度.仿真结果表明,新模型与针孔模型相比,平均误差值明显降低.并且比较了摄像机与物体的距离不同时,误差值的变化,确定了标定时的最佳距离.     

基于计算机视觉的运砂船超载状态检测

针对采砂监管过程中运砂船超载状态的检测问题,提出一种采用类Haar特征和Gentle Adaboost算法相结合的方法在非特写视频图像中检测吃水线和船舷线,通过手工标定的方式标定出标准载重干舷,然后通过实际干舷值与标准载重干舷值的比较来判断运砂船超载状态。实验表明,该方法能快速准确地在复杂的采砂现场环境中检测到目标运砂船的吃水线和船舷线,经手工标定后能准确地判断运砂船的超载状态,为采砂监管提供技术帮助。