Self-assembled monolayers of p-toluene and p-hydroxymethylbenzene moieties adsorbed on iron by the formation of covalent bonds between carbon and iron atoms for protection of iron from corrosion

An iron electrode was modified by electrolytic reduction in deaerated acetonitrile solution of p-toluenediazonium tetrafluoroborate CH₃C₆H₄N₂BF₄ (TDFB) or p-hydroxymethylbenzenediazonium tetrafluoroborate HOCH₂C₆H₄N₂BF₄ (HOTDFB) below 10 °C to form a self-assembled monolayer (SAM) of toluene CH₃C₆H₄- or hydroxymethylbenzene HOCH₂C₆H₄- (HOMB) moiety, probably adsorbed on the electrode by the formation of a covalent bond between carbon and iron atoms, as shown in references. The protective ability of the layer was examined by polarization measurement of the electrode in an aerated 0.5 M NaCl solution. The protective efficiencies of these two SAMs were not high, around 30%, a little higher than that of the toluenethiol CH₃C₆H₄SH SAM which was anchored on iron via a coordinate bond between sulfur and iron atoms. The iron surfaces modified with TDFB and HOTDFB were characterized by contact angle measurement, FTIR reflection spectroscopy and X-ray photoelectron spectroscopy. The persistence in protection of iron against corrosion by coverage with the HOMB SAM was confirmed by polarization measurements after immersion in 0.5 M NaCl for a long period of the time.     

Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED

This work presents some of the results from the project: “Effect of the environment on reinforcement durability” (DURACON) in its first two-years period, which investigates the influence of urban and marine meteorochemical parameters on the performance of reinforced concrete structures. The results presented in this investigation are from 21 marine test sites only (no urban environments are included), distributed among 11 countries (Argentina, Bolivia, Brazil, Chile, Colombia, Costa Rica, Mexico, Spain, Uruguay, Portugal and Venezuela). The environment was evaluated using ISO Standard 9223 and the concrete was characterized by measuring compressive strength, elastic modulus, total and effective porosity, chloride permeability according to ASTM standards, as well as the effective porosity and resistance to water absorption using the Fagerlund method. To that effect, concrete specimens (with and without reinforcement) were prepared for electrochemical and physical/mechanical/chemical tests using the existing materials in each participating country, following strict procedures which enabled the preparation of similar concrete samples. Two water/cement (w/c) ratios (0.45 and 0.65) were selected, where the concrete with 0.45 w/c ratio had to have a minimum cement content of 400 kg/m³ and the one with 0.65 w/c ratio a compressive strength of 210 kg/cm². Type I Portland cement, siliceous sand, and crushed rock as coarse aggregates (13-mm maximum nominal size) were used. After a one-year exposure, the results of the corrosion potentiality and probability analysis of the reinforcement in the different test stations showed that, for marine atmospheres, the most aggressive environment to induce steel corrosion was at Portugal’s Cabo Raso station, and the least aggressive one was at Chile’s Valparaíso station. These results are comparable with the ones found using electrochemical measurements, after a two-year exposure.     

Formation and crystallization of bulk Pd_(82)Si_(18) amorphous alloys

1　INTRODUCTIONMetallicglassisregardedasastatethatisofdis orderunlikecrystalalloyswith periodicatomstruc ture.Soitshowsexcellentcapabilitiesofsoftmag netism ,mechanics ,corrosionresistance ,etc .How ever ,mostofamorphousalloyswereproducedbyus ingrapidsolidificationmethodssuchassplatquench ing ,meltspinning ,andsoon ,withcharacteristiccoolingratesof 10 4 10 6 K/s .Becauseamorphousal loysarepreparedwithsilk ,powderandribbon ,itisgreatlylimitedinengineeringapplication .Recently ,severalbulk…     

放电等离子烧结Fe3B／（Pr,Tb）2Fe14B块体纳米晶双相复合永磁体的性能

采用放电等离子烧结技术将非晶Pr4.2Tb0.3Fe78B17.5薄带制备成块状纳米晶复合磁体。研究了烧结条件对磁体密度、微观结构和磁性能的影响。结果表明，烧结温度的升高可使磁体得到高致密度，但同时由于其晶粒长大，结果导致磁性能的恶化。在最佳烧结条件下得到磁体的磁性能为Br=1．02T，JHc=220kA／m。磁体具有较好的微观结构，平均晶粒尺寸为20nm。     

Electrochemical properties of Mg-based alloys containing carbon nanotubes

In this work, effects of partial substitution of Mg, Ni with AB₂ in Mg-based alloy and subsequent surface modification by further ball-milling with carbon nanotubes (CNTs) on electrochemical properties were investigated. Mg_1.9(AB₂)_0.1Ni_0.8 (AB₂=LaNi₂, LaNiCo and LaNiMn) alloys were prepared by solid-state diffusion method, the nanocrystalline Mg-based alloys were prepared by ball-milling the mixture of obtained Mg_1.9(AB₂)_0.1Ni_0.8 alloys and nickel powder. It was found that the electrochemical capacities of nanocrystalline Mg_1.9(AB₂)_0.1Ni_1.8 alloys were measured to be 460–490 mAh/g. The nanocrystalline Mg-based alloys containing carbon nanotubes (10 wt.%) obtained by ball-milling after 60 min were demonstrated to show improved electrochemical properties with respect to the original nanocrystalline Mg-based alloys. The electrochemical reaction activity was detected by electrochemical impedance spectra (EIS). Raman and X-ray photoelectron spectroscopy (XPS) proved the interaction between Mg_1.9(AB₂)_0.1Ni_1.8 alloys and carbon nanotubes after ball-milling, which resulted in an increase in the surface Ni/Mg ratio.     

带内筋筒形件强力旋压成形试验研究

通过选取不同的壁厚减薄率和旋轮进给比作为工艺参数，利用双旋轮强力旋压机对带内筋筒形件作旋压加工实验。根据实验结果分析了各种生产缺陷产生的原因，并提出了一定的解决办法，从而为减少大规模生产的经济损失，生产出合格的工件提供了理论和实践依据。     

Solid-solution hardening and softening by Fe additions to NiAl

Solid-solution hardening in the case of a ternary alloy addition to a B2 compound with the triple defect structure has been investigated. The fact that the ternary element may occupy either of two sublattices or may affect the concentration of other types of point defects present in the material makes this a very interesting problem to consider. Ni-rich (40 at% Al), stoichiometric (50 at% Al), and Al-rich (52 at% Al) alloys were doped with up to 12 at% Fe. Lattice parameter, bulk density and hardness measurements were performed on samples quenched from 1000 °C. It was found that solid-solution softening actually occurs in the Ni-rich alloys, while hardening was observed in the stoichiometric and Al-rich alloys. The vacancy concentration was determined from the experimental data, and the site occupancies of the Fe atoms were estimated from a thermodynamic model. Through careful consideration of all point defect concentrations the solid-solution hardening and softening behaviors could be effectively rationalized.     

ELA-120/6型电子束焊机高压电源隐患分析及对策

分析了EAL-120/6型电子束焊机高压电源存在的安全隐患,提出了消除隐患的两种措施:一是不改动油箱电路,从操作规程上加以解决;二是给高压电容加装并联放电电阻支路.给出一种改进实例.经试验证明,第二种消除隐患措施更为有效,停机10 s后,高压电缆间无"火花"出现.     

Effect of artificial aging on intergranular corrosion of extruded AlMgSi alloy with small Cu content

The effect of artificial aging parameters on the corrosion performance of air cooled AlMgSi(Cu) model alloy extrusions was investigated. Accelerated corrosion test revealed that the extrusions were highly susceptible to intergranular corrosion (IGC) in the naturally aged condition. However, IGC susceptibility was reduced, and finally eliminated, by artificial aging. Overaging introduced slight pitting susceptibility. EDS X-ray mapping in FE-TEM revealed Mg₂Si and Q-phase (Al₄Cu₂Mg₈Si₇) grain boundary precipitates and a continuous Cu-enriched grain boundary film. IGC susceptibility was related to the Cu-enriched grain boundary film. Increased IGC resistance was caused by coarsening of the grain boundary film by aging. Pitting susceptibility by over aging evolved due to coarsening of the Q-phase particles in the grain bodies.     

Preparation, thermal stability, and magnetic properties of Fe---Co---Zr---Mo---W---B bulk metallic glass

A bulk metallic glass (BMG) cylinder of Fe₆₀Co₈Zr₁₀Mo₅W₂B₁₅ with a diameter of 1.5 mm was prepared by copper mould casting of industrial raw materials. The amorphous state and the crystallization behavior were investigated by X-ray diffraction (XRD). The thermal stability parameters, such as glass transition temperature (T_g), crystallization temperature (T_x), supercooled liquid region (ΔT_x) between T_g and T_x, and reduced glass transition temperature T_rg (T_g/T_m) were measured by differential scanning calorimetry (DSC) to be 891, 950, 59 K, and 0.62, respectively. The crystallization process took place through a single stage, and involved crystallization of the phases -Fe, ZrFe₂, Fe₃B, MoB₂, Mo₂FeB₂, and an unknown phase, as determined by X-ray analysis of the sample annealed for 1.5 ks at 1023 K, 50 K above the DSC peak temperature of crystallization. Mössbauer spectroscopy was studied for this alloy. The spectra exhibit a broadened and asymmetric doublet-like structure that indicated paramagnetic behavior and a fully amorphous structure. -Fe was found in the amorphous matrix for a cylinder with a diameter of 2.5 mm. The success of synthesis of the Fe-based bulk metallic glass from industrial materials is important for the future progress in research and practical application of new bulk metallic glasses.