Structure and dynamics of dipolar fluids under strong shear

Molecular dynamical simulation has been carried out to investigate the structure and dynamics of a dipolar fluid under strong shear. Dipolar fluid consists of polarizable particles, which have an induced dipole moment in the applied field direction. Shear stress is perpendicular to the field direction. When shear stress is small, the flow has a flowing-chain structure. If shear stress increases to pass a critical value, flowing-chain structure changes to flowing layer structure. Each layer is parallel to the flow direction and shear direction. Within one layer, particles form strings in the flow direction.     

存储媒体的媒体内同步反馈控制算法

本文提出了一种存储媒体的媒体内同步反馈控制算法，该方案是建立在缓冲区占用率控制基础上，通过周期性地检查缓冲区的占用情况来检测失步，并将其反馈给发送方，由发送方对发送帧速率进行调整。文章给出了接收方所需缓冲区的设计准则及发送帧速率的调整方法，并分析了算法中各参数对同步性能的影响。实验表明该方案能够处理由于网络传输时延特性变化引起的失步，与其它反馈控制方案相比具有更低的数据丢弃率，从而使接收端播放平滑连续，具有良好的视频播放质量。     

Nonlinear discrete-time models: state-space vs. I/O representations

This paper compares state-space and input–output realizations for nonlinear discrete-time dynamic models. For linear models, these two realizations are essentially equivalent and their structures are closely related, but these statements do not hold for nonlinear models. We illustrate this point with simple, realistic examples for which only one of the two realizations exists or for which both exist but their structures are profoundly different. Overall, the main point of this paper is the importance of the choice of realization in the development of nonlinear dynamic models.     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

Assessment of Highway Bridge Upgrading by Dynamic Testing and Finite-Element Model Updating

The Land Transport Authority of Singapore has a continuing program of highway bridge upgrading for refurbishing and strengthening bridges to allow for increasing vehicle traffic and increasing axle loads. One subject of this program has been a short-span bridge taking a busy main road across a coastal inlet near a major port facility. Experiment-based structural assessments of the bridge were conducted before and after upgrading works including strengthening. Each assessment exercise comprised three separate components: (1) a strain and acceleration monitoring exercise lasting approximately one month; (2) a full-scale dynamic test carried out in a single day without closing the bridge; and (3) a finite-element model updating exercise to identify structural parameters and mechanisms. This paper presents the dynamic testing and the modal analysis used to identify the vibration properties and the quantification of the effectiveness of the upgrading through the subsequent model updating. Before and after upgrade, similar sets of vibration modes were identified, resembling those of an orthotropic plate with relatively weak transverse bending stiffness. Conversion of bearings from nominal simple supports to nominal full fixity was shown via model updating to be the principal cause of natural frequency increases of up to 50%. The utility of the combined experimental and analytical process in direct identification of structural properties has been proven, and the procedure can be applied to other structures and their capacity assessments.     

Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material

In this work we present the discrete models for dynamic fracture of structures built of brittle materials. The models construction is based on Voronoi cell representation of the heterogeneous structure, with the beam lattice network used to model the cohesive and compressive forces between the neighboring cells. Each lattice component is a geometrically exact shear deformable beam which can describe large rigid body motion and the most salient fracture mechanisms. The latter can be represented through the corresponding form of the beam constitutive equations, which are derived either at microscale with random distribution of material properties or at a mesoscale with average deterministic values. The proposed models are also placed within the framework of dynamics, where special attention is paid to constructing the lattice network mass matrix as well as the corresponding time-stepping schemes. Numerical simulations of compression and bending tests is given to illustrate the models performance.     

高速供送螺杆动态性能评价体系的建构

随着设备高速化的日益发展，传统的螺杆设计方法及相应的供送特性评价体系已显落后。参照蜗型凸轮动力学性能的评价方法，建立了高速供送螺杆的动态性能评价体系，为高速化供送螺杆的设计提供了性能参照指标。     

Correlation between quasi-static and dynamic crack resistance curves

The correlation between the crack resistance measured from dynamic and quasi-static J-R tests has been investigated based on test data from instrumented Charpy impact tests and quasi-static single edge notched bend (SENB) J-R tests.The method originally proposed by Aurich et al. [Analyse und Weiterentwicklung Bruchmechanischer versagenskonzepte--Lokales Risswachstum, Ermittlung des Risswiderstandsverhaltens aus der Kerbslagarbeit. BAM Forschungsbericht 192, Berlin 1993, ISBN 3-89429-329-2], to develop a correlation coefficient between the net fracture resistance of Charpy V-notch (ISO) and quasi-static compact tension tests, was extended to establish correlations between so-called ductile-brittle transition fracture resistance curves obtained from instrumented Charpy V-notched (ISO) and fatigue precracked impact tests and quasi-static SENB J-R fracture resistance tests.The correlation between the dynamic and quasi-static crack resistance with regard to practical application to fracture assessments appears to be reasonably consistent, bearing in mind the inherent scatter in crack resistance data in general. The findings of the present research project from testing of ship grade NVE 36 and pressure vessel steel to ASTM A516 Gr. 70 as well as two weldments in the NVE 36 steel, are in excellent agreement with the results of the research conducted by Aurich et al. [Analyse und Weiterentwicklung Bruchmechanischer versagenskonzepte--Lokales Risswachstum, Ermittlung des Risswiderstandsverhaltens aus der Kerbslagarbeit. BAM Forschungsbericht 192, Berlin 1993, ISBN 3-89429-329-2] for structural and pressure vessel steels to the German DIN standard steels including St 52-3, StE 355 and StE 460.