Study on a Distributed Wavelength Routing Algorithm in WDM Optical Transport Networks

A new design scheme for a distributed algorithm for routing and wavelength assignment (RWA) is developed in this paper, and the communication rules between the nodes to exchange signaling packets are discussed. The Adaptive-Alternate-Routing-Least-Load (AARLL) algorithm is implemented in the distributed scheme for the first time. Under dynamic traffic circumstances, the influence of the race condition, which does not exist in centralized scheme, on the network performance is analyzed and the analyzed results show that the race condition has a major impact on network performance only under light traffic load, while under medium and heavy traffic load the impact is very small. To analyze the performance loss caused by adopting the distributed algorithm for RWA, the capacity loss factor (CLF) is introduced and the calculated results show that CLF does not exceed 6% under medium traffic load.     

Java语言及其虚拟机技术探讨

随着Internet的迅猛发展，Internet编程语言Java愈来愈成为计算机行业的焦点。本文在简述了Java的主要特点后，重点对Java最关键的技术──虚拟机进行了深入的探讨。     

漳泽水库最优兴利调度研究

漳泽水库供水能力下降。优化调度方式是提高水库效益的最有效途径。通过采用随机动态规划方法与模拟模型交互运算得到现行控制水位的水库优化调度图。采用同样方法对不同控制水位的水库运行方式进行优化调度，选出的规划水库最优控制水位为汛限水位９０４ ．５ ｍ ，正常高水位９０５ ．５ ｍ 。优化的控制水位方案在保障水库防洪安全的前提下可供给城市生活和工业用水６ ３００ 万ｍ３ ，较现行控制水位下的供水量提高１ ２５５ 万ｍ３ 。但农业用水仍然不足，应采取一定措施给予解决，如对灌区工程进行改造，因地制宜采取不同节水措施和污水回用等。     

塔式烘干中心干燥控制系统采样数据的实时性

传统的干燥控制系统思维方式是把干燥流程看成是一个大的惯性场，以惯性的形态看待与过程相关的数据，对输入参数的过程实时性很少研究，这样的结果就是控制准确性、精确度与实际过程的吻合程度较差。拟从干燥系统输入体系的结构入手，采用时序分析的手法对入粮到干燥的传输时序进行解析，推理出动态实时数据模型。     

泡沫沥青混合料动态性能研究

为更好地模拟泡沫沥青混合料在车辆动载作用下的动态性能，便于与国外相关研究进行比较，采用劈裂法对混合料动态性能进行研究。通过试验研究骨料类型、级配、水泥用量等对泡沫沥青混合料动态回弹模量的影响，总结了泡沫沥青混合料动静模量的关系。     

地质超前预报和动态施工在隧洞施工中的应用

通过在直峰架洞施工过程中，地质超首预报与隧洞动态施工的结合，将国际岩体质量分级到生产实践中，针对不同级别的岩级，应用相应的施工方案，以达到为隧洞篱工总结经验的目的。     

Efficient solution of population balance equations with discontinuities by finite elements

Two refinements of Galerkin's method on finite elements were evaluated for the solution of population balance equations for precipitation systems. The traditional drawbacks of this approach have been the time required for computation of the two-dimensional integrals arising from the aggregation integrals and the difficulty in handling discontinuities that often arise in simulations of seeded reactors. The careful arrangement of invariant integrals for separable aggregation models allows for a thousandfold reduction in the computational costs. Discontinuities that may be present due to the hyperbolic nature of the system may be specifically tracked by the method of characteristics. These discontinuities will arise only from the initial distribution or nucleation and are readily identified. A combination of these techniques can be used that is intermediate in computational cost while still allowing discontinuous number densities. In a case study of calcium carbonate precipitation, it is found that the accuracy improvement gained by tracking the slope discontinuity may not be significant and that the computation speed may be sufficient for dynamic online optimization.     

液晶微位移传感器

液晶微位移传感器的工作原理是以负介电各向异性的向列相液晶材料的动态散射效应为基础的，文中给出了这种传感器的结构，测量方法、精度、应用范围和实验结果；研究了在阈值电压附近光的吸收和散射，讨论了该传感器的稳定性和遥控方法。     

Conductor design with high-Tc superconducting Bi(Pb)—2223/Ag multifilamentary tapes

With high upper critical fields, high temperature superconductors (HTSC) have been recognised as candidate materials for coil and magnet applications. High field devices, at one time or another, when operated close to their rated limits are often faced with instability problems which normally are electrical, magnetic or mechanical in nature. The determination of stability parameters, therefore, is of interest to the conductor designer which very much assists in the processing aspect of long length production of wires and tapes. Due to the morphology of the superconductor most HTSC devices made with Bi(Pb)—2223 precursor exist in tape form. Here the determination of stability parameters (for flux-jump and cryogenic stability) for multifilamentary Bi(Pb)—2223/Ag tapes are presented. Processing parameters such as intermediate deformation and filling factors have been found to play a crucial role, not only on the critical current density of the tapes but on the stability aspect in conductor design as well.     

K202A压缩机电机轴瓦超温的原因及对策

K202A压缩机的电机轴瓦采用的是动压轴承,经常持续升温。其主要原因是由于滑动轴承和轴之间是半液体摩擦,润滑油在轴颈及轴瓦之间没有形成具有足够压力的油膜,造成滑动轴承和轴局部形成半液体摩擦而产生大量的热量,又无法被带走引起的。文章通过验算K202压缩机电机滑动轴承温度,分析影响滑动轴承运行温度的因素,提出在原滑动轴承上开油楔及加装一台齿轮油泵为滑动轴承强制润滑,并且通过联轴器把电机和压缩机连接起来,用压缩机轴瓦托起电机轴,使电机轴颈和轴瓦之间处于液体摩擦状态,可有效地降低滑动轴承的运行温度。