基于激光积分球反射计的集成黑体发射率测量研究

集成黑体发射率是评价其有效光谱辐射亮度不确定度的关键贡献项。建立了激光积分球反射计测量系统,对中国计量科学研究院制备的集成空腔的法向光谱发射率进行了实验研究和模拟验证。在633nm的波长下测量了集成黑体法向光谱发射率,测量结果的标准不确定度优于0.043%。结果表明:集成黑体辐射源在室温条件下的有效发射率高于0.998,与STEEP3蒙特卡罗模拟计算结果偏差在0.04%之内。实验结果与数值模拟的一致性在测量结果不确定度内吻合良好,验证了激光积分球发射计法用于评价集成黑体发射率的可行性。     

Supercritical hydrothermal synthesis of titanium dioxide nanostructures with controlled phase and morphology

A novel template- and organic-free synthesis of TiO₂ nanostructures with controlled phase and morphology was realized through batch supercritical hydrothermal treatment (400 °C) of titanate nanotubes (TNTs) with H₂O₂ in NaOH aqueous solution. Well-defined 3D titanate hierarchical spheres (THSs), 2D multilayered titanate nanosheets (TNSs), and 1D monodisperse anatase nanorods (ANRs) exposing (0 1 0) facets were prepared in 15 min by slightly varying the NaOH solution pH. Specifically, the obtained Na/H-THSs (without/with HCl neutralization) exhibited highly porous structures with large specific surface area (109 m² g⁻¹ and 196 m² g⁻¹, respectively). Temperature-dependent phase and morphology evolutions of products under subcritical condition (200 and 300 °C) were investigated. The formation of the TiO₂ nanostructures from TNTs was proposed mainly following a dissolution–nucleation-growth mechanism, suggesting that both supercritical temperature and NaOH solution pH were determinant factors governing the nucleation and growth process and thus the phase and morphology.     

冲击球压技术研究材料局部损伤和弹塑性特征

冲击球压技术是基于赫兹接触理论发展起来的研究材料力学性能的新方法,尽管起步较晚,但是对材料力学性能特征和变化的研究是非常有效的.概述了近40年利用冲击球压技术分析材料局部损伤和评价材料弹塑性特征的理论和研究进展,重点阐述了利用冲击球压技术和赫兹接触理论评价材料恢复系数和动态硬度特征及变化的可行性、敏感性和精确性.结合研究现状对冲击球压技术中隐含的问题进行了划分,并展望了未来冲击球压技术的发展方向.     

Principle and application of ball SAW devices

A thin beam of waves usually diverges due to diffraction, which is a limitation of any device using such waves. However, a surface acoustic wave (SAW) on a sphere with an appropriate aperture does not diverge but is collimated, realizing ultra‐multiple roundtrips along an equator of the sphere. This effect is caused by the balance between diffraction and focusing on a spherical surface, and it enables realization of high‐performance ball SAW sensors. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 168(1): 41–51, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20817     

LTE-A系统一种降低复杂度的软球形检测算法

软球形译码算法虽然能接近ML(最大似然)算法的误码性能,但其计算复杂度很高。文章提出了一种降低计算复杂度的SSD(软球形译码)算法,该算法在QR(正交三角)分解算法的反向迭代上三角矩阵R中引入减弱噪声部分以缩小初始搜索半径,然后利用最小距离准则对搜索树进行有效地删减,缩小树搜索空间。MATLAB仿真结果表明,该算法在获得接近传统SSD性能的条件下,能够很大程度地降低系统的计算复杂度。     

Parallel sphere detector algorithm providing optimal MIMO detection on massively parallel architectures

Multiple‐input multiple‐output (MIMO) systems have attracted considerable attention in wireless communications because they offer a significant increase in data throughput and link coverage without additional bandwidth requirement or increased transmit power. The price that has to be paid is the increased complexity of hardware components and algorithms. The sphere detector (SD) algorithm solves the problem of maximum likelihood (ML) detection for MIMO channels by significantly reducing the search space of possible solutions. The main drawback of the SD algorithm is in its sequential nature, consequently, running it on massively parallel architectures (MPAs) is very inefficient. In order to overcome the drawbacks of the SD algorithm, a new parallel sphere detector (PSD) algorithm is proposed. It implements a novel hybrid tree search method, where the algorithm parallelism is assured by the efficient combination of depth‐first search and breadth‐first search algorithms. A path metric‐based parallel sorting is employed at each intermediate stage. The PSD algorithm is able to adjust its memory requirements and extent of parallelism to fit a wide range of parallel architectures. Mapping details for MPAs are proposed by giving the details of thread dependent, highly parallel building blocks of the algorithm. Based on the building blocks proposed, a mapping to general‐purpose graphics processing unit is provided, and its performance is evaluated. In order to achieve high‐throughput, several levels of parallelism are introduced, and different scheduling strategies are considered. Copyright © 2015 John Wiley & Sons, Ltd.     

农村民居防雷滚球半径合理性探析

针对农村民居的特点。分析其易遭受雷击的原因,提出应重视农村民居的防雷：推导农村民居防雷设计中的滚球半径的合理取值;建议在纬度45°以内地区小体量的建筑物防雷滚球半径可以参考使用75m。     

基于边缘像元投影的微小轴承亚像素边缘检测

对于微小轴承的内径测量,基于机器视觉的非接触测量技术具有广阔的应用前景。针对轴承的边缘像素点,投影将感光像元划分成感光值不同的两个部分,像素单元的最终灰度值为投影两侧局部灰度统计值的面积加权平均值,取该像素的矩形邻域,并对其邻域灰度值进行高斯加权处理,将边缘投影按泰勒公式展开为二次曲线得到高精度亚像素边缘。针对微小轴承进行实验,将本文算法与基于直线拟合的方法进行比较,每毫米包括约217.18个像素,检测的圆度提高0.04%以上,标准差减少不少于7.27%,因此可更准确获取微小轴承内径的亚像素边缘。     

等离子喷涂热障陶瓷涂层冷却累计残余应力的有限元模拟与验证

目的 为有效预测等离子喷涂热障涂层冷却过程中累积的残余应力,降低残余应力对涂层稳定性的影响,需寻求可靠的热障涂层应力检测方法。方法 利用有限元分析软件,采用生死单元法建立了等离子喷涂ZrO₂涂层的有限元模型,高斯热源模拟等离子喷涂热源工况,研究涂层冷却至室温的残余应力及其分布。使用X射线衍射法、拉曼光谱法对等离子喷涂制备的ZrO₂涂层进行残余应力检测。结果 通过有限元模拟结果可以看出,喷涂涂层冷却到室温后其中心区域的残余应力与边缘位置相比较大,主要集中在热流中心区域;每层涂层结合界面处会产生较大应力,致使应力沿涂层厚度方向变化明显。涂层的等效应力为160～220 MPa。采用X射线衍射法检测涂层存在180～185MPa残余应力。标定ZrO₂涂层的拉曼-应力因子为8.33 (cm·GPa)^-1,计算得到涂层存在残余应力为174～180 MPa。对喷涂试样进行拉伸试验后,其残余应力有一定程度的释放。结论 使用有限元能有效模拟等离子喷涂至室温时涂层内部残余应力,与XRD、拉曼光谱检测结果具有良好的匹配性,...