Object data MODEL = object-oriented + semantic models

The term ‘object-oriented database’ has been used to refer to different characteristics and mechanisms supported by semantic databases and (behaviorally) object-oriented ones. While this indicates the current confusion due to the lack of a common model, it also suggests the potential desirability of combining these two kinds of modeling facilities into the same nutshell. This paper summarizes from these two paradigms the features common to both, the features influenced/adopted by each other, and the features which are presented in one paradigm but missing from the other. After a brief analysis and discussion of these features, we conclude this paper by proposing our major theme: a complete object data model should take the union of the facilities offered by these two kinds of models.     

Alleviating convergence problems in Group Support Systems

Not all Group Support Systems are identical, as is demonstrated by their software implementations. We discuss two existing implementations of group support tools and the process models underlying them. We demonstrate that fundamental to both processes is the merging or integration of individual data. Based on this and other empirical research, the Shared Context Model (SCM) of cooperative work is adopted and we show that it supports existing processes and others. We expect that groups will find merging their work easier with the SCM. This model is presented and embedded in the architecture and implementation of four group tools. Because these tools are destined to be used by dispersed groups, synchronously or asynchronously, an object-based communication and control mechanism is incorporated. Finally, as graphics and multi-tasking have been shown to be increasingly important, the tools are implemented in Microsoft Windows for personal computers attached to local area networks.     

Sub-optimal solutions to track detection problem using graph theoretic concepts

This paper demonstrates how the problem of tracking targets, which appear as either straight or curved lines in two-dimensional display images (or data images) can be formulated in terms of a directed weighted graph model and how dynamic programming techniques can be efficiently applied to reach an optimal or sub-optimal solution. In general, track detection algorithms providing optimal solutions have good detective ability, but most of them suffer from the inability to detect discontinuous lines or to resolve efficiently pairs of crossing lines. A sub-optimal solution is provided that efficiently overcomes these weaknesses. We focus on modeling the track detection problem in terms of a graph, formulating fast sequential/parallel sub-optimal track detection algorithms and testing them on simulated data in order to show their detective ability. Moreover, we specify the conditions under which sub-optimal algorithms can perform at least as well as their corresponding optimal algorithms. This is significant for the track detection problem where fast, accurate and real-time detection is considered a necessity.     

An automated coding and classification system with supporting database for effective design of manufacturing systems

The philosophy of group technology (GT) is an important concept in the design of flexible manufacturing systems and manufacturing cells. Group technology is a manufacturing philosophy that identifies similar parts and groups them into families. Beside assigning unique codes to these parts, group technology developers intend to take advantage of part similarities during design and manufacturing processes. GT is not the answer to all manufacturing problems, but it is a good management technique with which to standardize efforts and eliminate duplication. Group technology classifies parts by assigning them to different families based on their similarities in: (1) design attributes (physical shape and size), and/or (2) manufacturing attributes (processing sequence). The manufacturing industry today is process focused; departments and sub units are no longer independent but are interdependent. If the product development process is to be optimized, engineering and manufacturing cannot remain independent any more: they must be coordinated. Each sub-system is a critical component within an integrated manufacturing framework. The coding and classification system is the basis of CAPP and the functioning and reliability of CAPP depends on the robustness of the coding system. The proposed coding system is considered superior to the previously proposed coding systems, in that it has the capability to migrate into multiple manufacturing environments. This article presents the design of a coding and classification system and the supporting database for manufacturing processes based on both design and manufacturing attributes of parts. An interface with the spreadsheet will calculate the machine operation costs for various processes. This menu-driven interactive package is implemented using dBASE-IV. Part Family formation is achieved using a KAMCELL package developed in TURBO Pascal.     

机械合金化的原理及在磁性材料研究中的应用

介绍了机械合金化的原理和描述机械合金化过程的理论模型。综述了机械合金化在磁性材料研究中的应用，并对目前研究中的存在的问题及发展前景进行了分析。     

棒束临界热流密度流体模化研究

在空泡物理和自然循环重点实验室氟里昂热工实验装置上进行了CHF实验 ,实验段为9 5×1 0mm元件管组成的 4× 4棒束 ,并对其开展了 4× 4棒束CHF流体模化研究。在压力 1 5 9～ 2 73MPa、质量流速 4 88～ 2 0 80kg (m2 ·s)、临界含汽率 -0 2 0～ 0 3 0的工况范围内 ,采集了 1 70个 4× 4棒束CHF实验数据 ,并与压力 9 9～ 1 6 2MPa、质量流速 2 74～ 1 4 73kg (m2 ·s)、临界含汽率 -0 2 0～0 3 4工况范围内 ,以水为工质相同棒束实验段内的 2 0 6个棒束CHF实验数据进行比较 ,发现Ahmad补偿失真模型、张振杰模型和Stevens Kirby模型在上述工况范围内不再适用于棒束CHF的模化 ,这些模型的预测偏差均大于 2 0 %以上 ,而且棒束CHF模化的流量模化因子k明显地受压力、质量流量和入口含汽率的影响。据此提出适用于上述工况范围内 4× 4棒束CHF模化的流量模化因子k的关系式 ,其CHF预测偏差在± 1 5 %以内 ,均方根误差为 7 0 5 %。     

Modeling video sources for real-time scheduling

What is the impact of the autocorrelation of variable-bit-rate (VBR) sources on real-time scheduling algorithms? Our results show that the impact of long term, or interframe, autocorrelation is negligible, while the impact of short term, or intraframe, autocorrelation can be significant. Such results are essentially independent of the video coding scheme employed. To derive these results, video sequences are modeled as a collection of stationary subsequences called scenes. Within a scene, a statistical model is derived for both the sequence of frames and of slices. The model captures the distribution and the autocorrelation function of real-time video data. In previous work, the pseudoperiodicity of the slice level auto-correlation function made it difficult to develop a simple yet accurate model. We present a generalization of previous methods that can easily capture this pseudoperiodicity and is suited for modeling a greater variety of autocorrelation functions. By simply tuning a few parameters, the model reproduces the statistic behavior of sources with different types and levels of correlation on both the frame and the slice level.     

A systematic approach to preliminary polymer process development: modeling and design

A general and complete methodology is presented to facilitate systematic modeling and design of polymer processes during the early development period. To capture and handle the subjective type of uncertainty, embedded in the preliminary process development, fuzzy theories are used as a basis to model and design the process in the presence of ambiguity and vagueness. Physical membership functions are developed for mapping the relation between process variables and the associated fuzzy uncertainties. Based on the qualitative results generated using our previously proposed “linguistic based preliminary design method,” the process modeling can be followed even in the absence of any process governing equations. The modeling is carried out by establishing an appropriate fuzzy reasoning system which provides a specific functional mapping that relates input process variables to one (or more than one) output performance parameter(s). A reduced yet feasible domain is generated by our qualitative design scheme to constrain the process variables. Now, any optimization routine can then be employed to search for a proper process design. We demonstrate the effectiveness of the proposed methodology by its application to a typical compression molding process.     

Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

Melt index prediction by weighted least squares support vector machines

Melt index is considered an important quality variable determining product specifications. Reliable prediction of melt index (MI) is crucial in quality control of practical propylene polymerization processes. In this paper a least squares support vector machines (LS‐SVM) soft‐sensor model of propylene polymerization process is developed to infer the MI of polypropylene from other process variables. Considering the use of a SSE cost function without regularization might lead to less robust estimates; the weighted least squares support vector machines (weighted LS‐SVM) approach of propylene polymerization process is further proposed to obtain a robust estimation of melt index. The performance of standard SVM model is taken as a basis of comparison. A detailed comparison research among the standard SVM, LS‐SVM, and weighted LS‐SVM models is carried out. The research results confirm the effectiveness of the presented methods. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 285–289, 2006