BP神经网络在致密砂岩储层识别中的应用

川西须家河组地层岩性复杂,属于超致密低孔渗储层,所以储层识别是该地层天然气勘探中所面临的关键问题和难点之一。针对常规储层识别准确率不高的状况,提出利用BP神经网络进行储层的气水干层识别,利用模糊聚类和产层测试结果标定建模样本,采取随机抽样形成建模集与测试集,建立BP神经网络模型对23口井的储层进行气水干层预测,正确率达77.9%以上,明显提高了该地区的测井解释精度,并提供了一种准确率较高的储层预测方法。     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

Design optimization of 3D steel structures: Genetic algorithms vs. classical techniques

In this paper an elitist genetic algorithm (GA) developed by the authors is compared with common commercial solutions for complex structural optimization. After its prior validation on two-dimensional (2D) structures, the GA was tuned and improved in order to obtain structural elements with minimum weights that satisfy the ultimate limit states of the applicable building code. Subsequently, the same spatial structures were optimized using a commercial structural analysis program. Finally, the cost and weight improvements obtained using the GA, although at a higher computational cost, are discussed.     

Transformations in machining. Part 1. enhancement of wavelet transformation neural network (WT-NN) combination with a preprocessor

Properly selected transformation methods obtain the most significant characteristics of metal cutting data efficiently and simplify the classification. Wavelet Transformation (WT) and Neural Networks (NN) combination was used to classify the experimental cutting force data of milling operations previously. Preprocessing (PreP) of the approximation coefficients of the WT is proposed just before the classification by using the Adaptive Resonance Theory (ART2) type NNs. Genetic Algorithm (GA) was used to estimate the weights of each coefficient of the PreP. The WT-PreP-NN (ART2) combination worked at lower vigilances by creating only a few meaningful categories without any errors. The WT-NN (ART2) combination could obtain the same error rate only if very high vigilances are used and many categories are allowed.     

MS方法的一个新证明及其结构优化算法

本文给出Ｍｉｌｎｅ－Ｓｉｍｐｓｏｎ（ＭＳ）预测─校正法新的导出方法，并以结构优化思想设计出通用性和可靠性较强的算法。     

基于参考模型的自适应话音处理

本文讨论了一种带有参考通道的自适应话音消噪滤波器原理，该滤波器采用最小均方差(心幅)算法。将此滤波器应用于复杂噪音背景的话音信号提取，能很好地抑制背景噪声，从而获得清晰的话音信号。     

Evolving Fault-Tolerant Neural Networks

In this paper, genetic algorithm is used to help improve the tolerance of feedforward neural networks against an open fault. The proposed method does not explicitly add any redundancy to the network, nor does it modify the training algorithm. Experiments show that it may profit the fault tolerance as well as the generalisation ability of neural networks.     

小生境遗传算法AVOA反演

采用具有水平对称轴的横向各向同性(HTI)模型研究裂缝性油气藏,P波振幅随炮检距和方位角变化(AVOA),表现出较强的方位各向异性特征。本文基于Ruger提出的HTI介质模型的P波反射系数公式,利用由基准测线和另外两条与之呈45°、90°测线的P波反射系数的相对差异估算裂缝方位;同时引入小生境遗传算法,对基准测线和与之呈90°测线的P波反射系数差进行反演,得到了较高精度的纵、横波波速比和Thomsen各向异性参数。     

GIS中实时建立区域拓扑关系的快速算法

针对GIS中建立区域拓扑关系的实时性要求,论文提出一个结合基于图的拓扑信息和基于几何的左转算法的区域拓扑关系生成算法。利用区域的连通性提高了算法效率,左转算法保证了算法的可靠性。     

一种PN码自适应捕获门限的改进算法

文献[1]提出了一种用于直扩系统的PN码自适应门限算法。但该文献也指出,此算法对门限总数十分敏感。当门限总数设置不当时,系统的平均捕获时间将显著增加。这限制了该算法在实际中的应用。本文就此提出了改进,给出了算法及电路框图。仿真结果表明,与原方案相比,改进算法改善了对门限总数的敏感性,降低了PN码平均捕获时间。