Enhancement of fatigue endurance and retention characteristic in Bi3.25Eu0.75Ti3O12 thin films

The effects of moderate annealing temperature (600–800 °C) on the microstructure, fatigue endurance, retention characteristic, and remnant polarization (2P_r) of Bi_3.25Eu_0.75Ti₃O₁₂ (BET) thin films prepared by metal-organic decomposition (MOD) were studied in detail. 2P_r (66 µC/cm² under 300 kV/cm), fatigue endurance (3% loss of 2P_r after 1.2 × 10¹⁰ switching cycles), and retention characteristic (no significant polarization loss after 1.8 × 10⁵s) for BET thin film annealed at 700 °C are better than those for thin films annealed at other temperature. The mechanisms concerning the dependence of microstructure and ferroelectric properties on the annealing temperature were discussed.     

非能动余热排出系统敏感性分析

以中国改进型压水堆核电站CPR1000为研究对象,在其蒸汽发生器二次侧设计了一套非能动余热排出系统（PRHRS）,该系统采用在蒸汽发生器二次侧建立自然循环的方式间接带走堆芯余热,确保事故条件下堆芯安全。用RELAP5/MOD3.2程序对系统进行了合理的简化并建模,在全场断电（SBO）事故条件下模拟了PRHRS的瞬态响应过程,并对高位水箱的容积、PRHRS换热器的换热面积、冷热中心高度差以及PRHRS的投入时间等影响PRHRS工作特性的相关参数进行了敏感性分析。计算结果表明：增加高位水箱的容积和增大换热面积均有助于二次侧余热排出系统带走一回路的堆芯余热;降低冷热中心高度差对PRHRS的自然循环能力影响不大;余热排出系统投入时间越早,蒸汽发生器二次侧水位越高,越有利于一次侧余热的排出。     

一体化反应堆强迫循环转自然循环过程瞬态特性分析

核反应堆的自然循环可提供非能动余热排出能力,有利于提高反应堆的固有安全性。本文以一体化压水堆概念设计方案为对象,利用RELAP5/MOD3.4程序对强迫循环转自然循环过渡过程的瞬态特性进行分析,探讨了反应堆功率、主泵阻力、主泵转动惯量等因素以及不同运行策略对转换过程瞬态特性的影响规律。     

RELAP5/MOD3.3程序对非能动核电厂小破口失水事故的适用性研究

AP1000核电厂采用非能动堆芯冷却系统来缓解小破口失水事故(SBLOCA),缓解事故的理念是流动冷却。RELAP5/MOD3.3程序适用于传统核电厂SBLOCA研究,对于非能动电厂SBLOCA研究的适用性需重新研究与评估。本工作基于非能动电厂小破口失水事故的分析,结合RELAP5/MOD3.3的结构与模型,对其进行评估和改进。为验证改进后的RELAP5/MOD3.3的适用性,以AP1000小破口失水事故的验证试验台架APEX-1000为模拟对象,分析模拟DBA-02、NRC-05事故工况。分析结果表明,改进后的RELAP5/MOD3.3的计算结果与试验数据符合较好。     

压水堆冷管段 2% 小破口失水事故实验研究

在高压综合实验装置（ＨＰＩＴＦ）上进行了压水堆冷管段２％小破口失水事故实验（ＮＳＢ－６），破口方向为冷管段底部，破口面积为２％。实验再现了核电厂发生小破口失水事故时的热工水力学现象，实验结果与ＲＥＬＡＰ５／ＭＯＤ２系统分析程序的计算结果作了比较，验证了该程序对小破口失水事故的分析能力。     

The Application Model of Moving Objects in Cargo Delivery System

Consider a database that represents and manages the information about moving objects and their locations such as the material delivery system, the communication is vital and constant among the database (delivery center), the moving objects (the material on road) and database application users (the owner of the material). We need to establish the new model for moving objects such as location model, indexing, dynamic attributes, spatial and temporal query, etc. in database management system (DBM…     

MOD--一种媲美Sol-gel的薄膜制备方法

分别从热力学过程、化学过程、工艺过程3个方面综述了MOD(金属有机物热分解)成膜方法,重点论述了MOD成膜的推动力和热处理工艺中薄膜结晶状态的改变.在此基础上对薄膜的性能进行了控制和优化.关注了MOD成膜法的最新进展,包括BT和PZT纳米线的制备、PT纳米点的制备,并对MOD与Sol-gel进行了系统性的比较.     

基于RELAP5程序的AP1000典型事故瞬态特性研究

基于最佳估算程序RELAP5/MOD3.3,对AP1000系统进行了详细的建模分析,选取冷却剂泵卡轴事故、蒸汽发生器(SG)传热管破裂事故和直接注射管线双端断裂事故作为典型事故,获得了典型事故工况下关键参数的瞬态特性和非能动系统响应特性。结果表明:对于冷却剂泵卡轴事故,一回路最大压力为16.82 MPa,燃料包壳表面温度最大值为1 299K,满足验收准则的要求;对于SG传热管破裂事故,破损SG的水体积为231.54m3,小于AP1000蒸汽发生器255.563m3的总容积;对于直接注射管线双端断裂事故,AP1000的非能动堆芯冷却系统能对一回路进行冷却和降压,并防止堆芯裸露和燃料包壳过热。     

基于工效学原理的MOD法在生产线平衡中的应用

从工效学原理出发，运用模特排时法（MOD）对某公司装配线流程和节拍进行测定与分析，指出该工段在任务分配、操作方法、标准时间等方面存在的缺陷，在此基础上，运用动作经济原则提出改进方案，并对改进前后的结果进行了对比分析，结论证明改进效果明显。     

Ferroelectric Properties of Pb(Zr1 − x,Tix)O3 Prepared by Modified Metallo-Organic-Decomposition Process

Beneficial effect of nano-sized PZT powder incorporation on modifying the characteristics of Pb(Zr_0.52Ti_0.48)O₃, PZT films was demonstrated. The amorphous phase derived from metallo-organic-decomposition (MOD) process started to crystallize at a post-annealing temperature as low as 500°C and can withstand 650°C post-annealing temperature process without inducing the PbO-loss phenomenon. However, 500°C post-annealed PZT films still exhibit paraelectric properties, which can be ascribed to the co-existence of large proportion of amorphous phase, surrounding the crystalline phase. It needs at least 650°C post-annealing process to fully developed the pervoskite structure for PZT films. The remnant polarization (Pr) of the PZT films increases with the proportion of crystalline phase, achieving Pr = 24.9 μC/cm² for 650°C annealed films, with coercive field (Hc) around Ec = 373 kV/cm.