Drying of Uncoated Paper with Gas-Fired Infrared Emitters—Optimum Emitters' Location Within a Paper Machine Drying Section

This article theoretically investigates the drying of uncoated paper with gas-fired infrared (IR) emitters installed within the drying section of a given commercial paper machine. Specifically, it presents the ideal location of two opposing IR emitters within the drying section. The ideal location of the two opposing IR emitters corresponds to the highest machine speed with specified average moisture content of paper sheet at the end of the drying section. This article also presents the average evaporation rate, temperature, and moisture content of the paper sheet as it travels through the drying section with the two opposing IR emitters operating at the optimum location. In addition, the temperature and moisture profiles in the sheet thickness direction, before and after the IR emitters, are provided. This article is not concerned with the potential effects of drying with IR emitters on paper sheet properties and machine runnability issues.     

我国突发性水资源污染事故应急机制的若干问题评述

基于突发性水资源污染事故应急处理现状的分析,对目前我国突发性水资源污染事故防范和应急机制的建立进行探讨,指出当前工作中的三大缺陷,并有针对性地提出如何加快防范突发性水资源污染事故以及建立相关应急机制的进程的若干措施,包括突发污染事故的隐患调查、脆弱性评价、水质预报、动态监测以及应急组织机构等方面,以期能为我国减少突发性水资源污染事故及其损失提供一定的理论分析依据。     

宽流道板式换热器在氧化铝生产种子分解过程中的应用

介绍了宽流道板式换热器的结构、特点及在氧化铝生产种子分解过程中的应用。     

论经济合理的生态用水量及其计算模型(Ⅱ)——应用

在“经济合理的生态用水量”概念及计算模型的基础上,以北京市为例,把该市的用水分为工业用水、农业用水、生活用水、第三产业用水、生态环境用水5个部分,分别计算各部分的用水效益,通过模型计算得出了符合北京市水资源实际情况的水资源分配数量。结果表明,在满足北京市经济用水和生活用水的基础上,经过模型计算调整后的用水效率从26.81元/m3提高到32.49元/m3,提高了20.42%。     

Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

Dynamique motivationnelle de l'epuisement et du bien-etre chez des enseignants africains.

This study examines the links between antecedents and consequences of Gabonese teachers' (N= 152) work motivation. The theoretical underpinnings are based on the Motivational Model of Job Burnout (MMJB) which is grounded in Self-Determination Theory (SDT) and states that the more supervisors satisfy an employee's need for self-determination, competence, and relatedness, the more self-determined is the latter's work motivation. The level of self-determined motivation has an impact on job satisfaction, which in turn determines life satisfaction. Higher levels of self-determined motivation also buffer emotional exhaustion and psychological distress. The model was confirmed via structural equation modeling and provides support for the validity and generalizability of the MMJB and SDT. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

NaSCN装置脫色釜H_2S爆燃的原因分析与对策

分析了NaSCN装置脱色釜爆燃的原因,找出了引起爆燃的主要因素,提出了脱色生产安全防范措施。     

Plastic deformation of bcc metal thin foils without dislocation

Heavy plastic deformation of fcc metal thin foils to fracture has been found recently to proceed without involving dislocations, and it results in the formation of high density of vacancy clusters. Thin foil specimens of bcc metals such as V and Mo were plastically deformed to fracture in in situ elongation experiments under an electron microscope. Morphology of thinning and fracture was found to be similar to fcc metals, and no dislocation was observed during heavy deformation. Electron diffraction analysis at the tip of a crack during deformation confirmed a large elastic deformation of up to 5%. Unlike in fcc metal thin foil specimens, point defect clusters were not observed near fractured tips. This difference is attributed to the difference in vacancy reaction, though the deformation in bcc metals without dislocation most likely does produce vacancies.     

尖晶石型软磁铁氧体纳米材料的制备研究进展

介绍了软磁铁氧体纳米材料的特性,综述了近年来具有尖晶石结构的软磁铁氧体纳米材料的制备方法。其中包括:化学共沉淀法,水热法,溶胶-凝胶法,喷雾热解法,微乳液法,相转化法,超临界法,冲击波合成法,微波场下湿法合成,爆炸法,高能球磨法,自蔓延高温合成法等。详细介绍了各种制备方法的特点,研究进展及其发展趋势。     

聚合反应器制造质量控制要点探讨

聚合反应器是无法检修设备,不允许打开,所以聚合反应器的制造质量必须严格控制,在设备制造过程中,严格按照设计图纸、技术要求及国家现行标准,进行控制设备制造、检验和验收,使制造质量达到规定要求。