地下水污染试验研究进展

本文在总结国内外众多学者有关污染物在含水层中的运移规律研究成果的基础上，介绍了地下水污染试验研究的最新进展；并据此认为，三维弥散，各向异性含水层介质中污染物的迁移，非饱和土层中的污染物多相迁移和吸力的关系等将成为今后地下水污染传播研究的主要问题。     

土壤源热泵取热的实验研究

通过广泛分析国内外对土壤源热泵实验研究的现状,建立了可以模拟多个地区、多种运行工况的土壤源热泵沙箱实验台,并进行了绝热边界工况短期内取热的实验研究。     

Silver impregnation applied to striated muscle: The sarcoplasmic reticulum

The classical black reaction developed by Camillo Golgi is shown to impregnate the tubules and fenestrations of the sarcoplasmic reticulum (SR) in striated muscle. This is a double impregnation of chromate and silver, which usually fills extracellular spaces. The method is difficult insofar as long incubation times are required, and location of the successfully “stained” SR in plastic-embedded tissue blocks is unpredictable. The light microscope is absolutely necessary to find the good regions which can then be cut from the blocks in 1-μm-thick sections and examined in the electron microscope. Stereo pairs give the best results since these resolve overlap problems common to thick sections. A variety of artifacts are illustrated which can help avoid erroneous interpretations. The Golgi-“stained” SR shows this elusive network with unsurpassed contrast and should benefit the morphological studies of muscle-membrane enthusiasts.     

仿真环境中的网络攻击模型设计

阐述了仿真环境中的网络攻击模型的设计,建立了一个网络攻击仿真模型,用以产生网络攻击,以达到摧毁网络的机密性、完整性和可用性的目的;采用知识表达的方法来建立模型,该模型包含具有知识库和推理机的专家系统,通过随时间而变化的量,使模型具有基于仿真时钟的推理能力;在攻击模型的设计中,定义了它的基本状态和状态跃迁函数,说明了模型的行为,以及攻击策略的制定,最佳策略的选择,攻击选择原则等问题。     

氨氮监测中样品蒸馏预处理对结果的影响分析

氨氮监测采用预蒸馏处理后，比色测定结果明显偏低。在样品预蒸馏处理过程中，硼酸作为吸收液，使显色时溶液pH值偏低，导致显色不充分是其主要影响因素。通过采取增加显色剂加入量的方法，解决了显色pH值偏低的问题，得到满意的测定结果。     

液化天然气供气站的工艺设计

〗LNG供气站的设计核心是工艺设计，设计中应注意以下几点：正确处理技术先进性与经济合理性的关系，综合权衡设置费与运营费的比例，力求项目全寿命费用最低；大多数城市LNG供气站均利用空气气化LNG，单罐容积为100 m³的真空压力式储罐广泛用于储存量为1200 m³以下的LNG供气站；为正确设置储罐安全阀的开启压力和排放压力，必须根据储罐的最高工作压力按照规范正确确定储罐的设计压力；储罐上2套独立的液位计和高、低限报警自动切断装置可确保储罐安全运行；空温式气化器的气化能力按用气城市高峰小时计算流量的1.3~1.5倍确定，为便于自然化霜应设置2套空温式气化器切换使用；空温式气化器出口串接水浴式加热器可提高冬季或雨天出口天然气温度，保护碳钢管道并降低供销差；LNG储罐区应设置围堰，消防用水量为喷淋与水枪用水量之和。最后建议，必须尽快颁布国家LNG设计规范，以提高我国的LNG设计水平。     

Simulations of the mobile phase of polyethylene

Results are presented from atomistic molecular dynamics simulations of the mobile pseudo-hexagonal phase of polyethylene, which occurs under conditions of elevated pressure and temperature. Three different types of model are considered, all of which employ periodic boundary conditions. The first model consists of n-alkane sequences (48×-C₂₄H₄₈-) that are bonded across the simulation box boundaries to produce chains that are effectively infinite in extent. On heating, at high pressure, this system displays a rotator phase, in which the chains retain an all-trans conformation, and rotate as semi-rigid units. A second model, consisting of finite n-alkanes (48×C₂₄H₅₀) displays the same behaviour at low temperatures, but at high temperature and pressure forms a conformationally disordered rotator phase, characterised by a large proportion of gauche defects and a significant lattice expansion. The final model considered contains long n-alkanes (24×C₁₀₂H₂₀₆) which contain jog defects and each pass twice through the simulation box. This model forms a conformationally disordered rotator phase at high temperature and ambient pressure. The behaviour of the three models, in terms of the variations in chain conformation and rotational and translational dynamics, are compared. The conformationally disordered phases provide useful representations of the experimentally observed mobile phase.     

机械结构动态改进技术在电动机振动噪声防治中的应用

本文介绍了结构实验模态分析、灵敏度分析和局部结构改进分析等先进的结构动态改进技术的基本原理,并由此对Y112M-4型电动机的机座进行了计算和分析,确定出一个结构改进方案.经实际改进试验验证,这一改进可有效地抑制电动机电磁振动和电磁噪声的传递,具有明显的减振降噪作用.     

Synthesis,characterization and ion exchange properties of zirconium(IV) tungstoiodophosphate,a new cation exchanger

Zirconium(IV) tungstoiodophosphate has been synthesized under a variety of conditions. The most chemically and thermally stable sample is prepared by adding a mixture of aqueous solutions of 0·5 mol L⁻¹ sodium tungstate, potassium iodate and 1 mol L⁻¹ orthophosphoric acid to aqueous solution of 0·1 mol L⁻¹ zirconium(IV) oxychloride. Its ion exchange capacity for Na⁺ and K⁺ was found to be 2·20 and 2·35 meq g⁻¹ dry exchanger, respectively. The material has been characterized on the basis of chemical composition, pH titration, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis. The effect on the exchange capacity of drying the exchanger at different temperatures has been studied. The analytical importance of the material has been established by quantitative separation of Pb²⁺ from other metal ions.     

A framework of virtual prototyping environment for the design and analysis of mechanical mechanism with clearance

Mechanical mechanisms with clearance abound in technological fields such as robotics, machine and steam turbine industry. The dynamic performance of these mechanisms in working condition can be achieved provided that the effects of the different on the mechanisms (such as mechanism dynamics, technological effects and thermal behaviour) are thoroughly understood. Virtual prototyping provides an integration of multi-domain dynamic simulation for the design and analysis process. In the current paper, a framework of virtual prototyping environment for the design and analysis of mechanical mechanism with clearance is presented. A case study with such a simulation strategy is studied for the optimum design and analysis of the technological parameter.