一种新型声波降粘防蜡装置

新型声波降粘防措装置由上、下接头、振动簧片和收缩喷嘴构成。装置安装在抽油泵泵简之下，尾管之上，在压差作用下井下流体以较大速度从装置的喷嘴射出，冲击振动簧片，产生机械振动声波，油水混合液在声波中产生相应的声波力学效应和分散乳化作用等，使混合液在油管内的粘度降低，蜡晶不易聚集长大，从而达到降粘防蜡延长油井热洗周期的目的。室内试验及现场近20口井的应用情况表明，这种装置具有结构简单、成本低廉、应用方便等特点，具有明显的降粘防蜡效果。     

Effects of viscosity on the bitterness and astringency of grape seed tannin

To examine the separate effects of viscosity and sweetness on astringency, aqueous solutions of grape seed tannin (GST) were thickened with carboxymethyl cellulose (CMC) from 2 to 45 cP (experiment 1) or sweetened with 0 to 1.8 g/L aspartame (experiment 2). Trained subjects continuously rated astringency and bitterness in duplicate. Subjects were categorized by the salivary flow induced by citric acid and ability to taste n-propyl thiouracil (PROP). In experiment 1, maximum intensity and total duration of astringency were significantly decreased as viscosity rose, although time to maximum intensity of astringency was not affected. Maximum intensity and total duration of bitterness were not significantly affected by increasing viscosity; however, the onset of bitterness was significantly delayed. In experiment 2, increasing sweetness had no affect on any astringency parameter, although maximum intensity of bitterness was significantly decreased. Neither PROP nor salivary flow-status had any effect on perception of bitterness or astringency in either experiment.     

Saturated liquid viscosities and densities of environmentally acceptable hydrochlorofluorocarbons (HCFCs)

Measurements of saturated liquid viscosities and densities were performed on environmentally acceptable hydrochlorofluorocarbons (HCFCs), CH₃CCl₂F (HCFC-141b), CH₃CClF₂ (HCFC-142b; only for viscosity), CF₃CF₂CHCl₂ (HCFC-225ca), and CClF₂CF₂CHClF (HCFC-225cb), using a capillary viscometer and a glass pycnometer in the temperature range from 273 to 353 K. The uncertainty in the measurement of viscosity is estimated to be 5% based on the comparison of the present data with those in the literature for HCFC-141b. An equation is given to represent our saturated liquid viscosity data as a function of temperature.     

The viscosity of liquid water at pressures up to 32 MPa

The paper reports new, preliminary measurements of the viscosity of liquid water along two isotherms as a function of pressure up to 32 MPa. The measurements have been performed with a vibrating-wire viscometer especially modified for the purpose. The instrument has been calibrated with respect to the viscosity of water at a pressure of 0.1 MPa and a temperature of 293.15 K, for which an accurate reference value is available. With due regard to the precision of the determination of individual quantities and the accuracy of the calibration data, it is estimated that the accuracy of the present results is one of ±0.3% under all conditions.Paper dedicated to Professor Joseph Kestin.     

组成、粘度比及加工条件对PB／CS共混物粘度和形态的影响

研究了组成、粘度比、转速和混合时间对聚丁烯／玉米浆共混物的粘度和形态的影响。结果表明，共混物的粘度均随转速的提高而增大。在高转速下，８０／２０共混物的粘度比其它组成的共混物的粘度增长迅速。在聚丁烯和玉米浆的界面观察到复合乳化结构。分散相液滴尺寸较小时，液滴尺寸的变化对共混物的粘度有很大的影响。     

Transport properties of 1,1-difluoroethane (R152a)

Based on reliable. carefully selected data sets. equations for the thermal conductivity and the viscosity of the refrigerant R 112a are presented. They are valid at temperatures from 240 to 440 K, pressures up to 20 MPa. and densities up to 1050 kg · m^–3. including the critical region.     

特超稠油污水回掺降粘集输工艺

通过对河南古城油田BQ10区特超稠油乳状液的室内试验分析,指出该种乳状液的实际相突变点为68%左右,当相浓度Φ≥68%时,以W/O型为主的乳状液突变为以O/W型为主的乳状液.乳状液变型后,原油与管道内壁之间的摩擦以及原油之间的摩擦转变为水与管道内壁及水与水之间的摩擦,从而大幅度降低其粘度和摩阻损失;通过对古城BQ10区特超稠油区块单元内部污水回掺降粘集输的现场试验,证明与室内试验分析得出的结论相符合,说明区块单元污水回掺不同于常规的掺热水,也不同于掺联合站处理过的净化污水,它优于单井掺稀油.最后指出该工艺可有效地降低井站回压,方便生产管理,降低开采成本,提高采油效率和经济效益,具有低耗节能的优点.     

SJT-B助剂/表面活性剂/聚合物三元复合体系的黏度和界面张力研究

助剂SJT-B是10%的磷硅酸盐胶体溶液,含有Na^＋和K^＋、SiO3^2-和PO4^3-等离子,在活化状态下一部分SiO3^2-和PO4^3-生成具5个负电荷的聚磷硅酸根链状阴离子,后者可结合Ca^2＋、Mg^2＋而形成纳米磷硅酸盐胶态粒子,避免结垢并防止金属腐蚀。以助剂SJT-B代替NaOH,用大庆油田回注污水配制SJT-B/烷基苯磺酸盐/聚合物三元复合溶液,取SJT-B浓度为1.0-8.0 g/kg,石油磺酸盐浓度为0.5-4.0 g/kg,聚合物浓度为1.2 g/kg,按排列组合法得到25个实验配方。对照NaOH/石油磺酸盐/聚合物溶液组成为12/3.0/1.2 g/kg,初配黏度（45℃,7.34s^-1）27.3 mPa·s,界面张力（45℃）3.20×10^-3mN/m。初配各实验配方溶液黏度31.2-44.8 mPa·s,45℃老化30天后黏度降低率2.71%-36.97%;初始界面张力最低值1.13×10^-3mN/m,最高值4.34×10^-2mN/m,在界面活性图上,10^-3mN/m超低界面张力区出现在高SJT-B和烷基苯磺酸盐区,老化后该区扩大。筛选出的SJT-B/石油磺酸盐/聚合物体系组成为4.0/3.0/1.2 g/kg,其初始黏度为37.1 mPa·s,老化后黏度降低3.77%,初始界面张力1.79×10^-2mN/m。图2表3参8。     

硅化腐植酸钠GFN-1的研制

针对目前生产腐植酸硅化产品原料受限的缺点,在大量试验的基础上,确定了一条以腐植酸和硅化剂为主要原料的生产工艺,合成了一种与有机硅腐植酸钾(OSAM-K)性能相当的硅化腐植酸钠产品GFN-1,对其常规性能指标和在清水及无固相聚合物钻井液体系中、在膨润土浆和低固相钻井液体系中应用指标,耐温性能进行了对比实验。实验结果表明,GFN-1作为钻井液添加剂,具有良好的降滤失、降黏、耐温及热稳定性,并兼有优良的控制页岩分散能力,其大多数应用性能相当于或略优于OSAM-K,作为替代品完全能够满足油田现场应用的需要。GFN-1的硅化原料性质稳定、来源广泛,生产工艺简单易行,产品质量稳定,具有较好的推广价值。     

重油纳米化助燃效果研究与表征

将复配的分散剂加入重油中制备得到重油纳米颗粒，采用氧弹热值对比法对所研制的纳米化重油进行实验室评价。研究结果表明，纳米化后的重油燃烧性能得到了改善，在掺水量为3％～12％时，重油的燃烧效率提高了2．5％～6．1％。通过TEM观察，纳米化后的重油呈水包油（O／W）型乳液结构，油水界面清晰，界面膜较厚，乳化油粒径约为20～50nm，油水分散均匀，并且分散后的重油粘度增幅小，掺水量在15％以内，粘度增幅不超过20％，并且随着掺水量的增加，乳化重油的粘度逐渐减少。另外，乳化重油稳定性好，室温下至少可保存6个月，在80℃下存放3天未发生破乳现象。