MY RECOLLECTIONS OF G.2 A.6

Abstract

In this article, we consider an attack on the SIGABA cipher under the assumption that the largest practical keyspace is used. The attack highlights various strengths and weaknesses of SIGABA and provides insight into the inherent level of security provided by the cipher.     

Optimization of the working fluid for a sorption-based Joule–Thomson cooler

Sorption-based Joule–Thomson coolers operate vibration-free, have a potentially long life time, and cause no electromagnetic interference. Therefore, they are appealing to a wide variety of applications, such as cooling of low-noise amplifiers, superconducting electronics, and optical detectors. The required cooling temperature depends on the device to be cooled and extends into the cryogenic range well below 80 K. This paper presents a generalized methodology for optimization in a sorption-based JT cooler. The analysis is based on the inherent properties of the fluids and the adsorbent. By using this method, the working fluid of a JT cooler driven by a single-stage sorption compressor is optimized for two ranges of cold-tip operating temperatures: 65–160 K and 16–38 K. The optimization method is also extended to two-stage compression and specifically nitrogen and carbon monoxide are considered.     

A robust hybrid method for maximum power point tracking in photovoltaic systems

In this paper a new hybrid method for maximum power point tracking in PV systems has been proposed. This method combines offline and online methods in order to estimate duty cycle of converter in maximum power point. In the offline phase, temperature and radiation intensity are the inputs of the system to estimate the approximate maximum power based on analytical equations of solar cell. These equations which give the relation of maximum power with temperature and irradiation can be derived from characteristics of cell provided by manufacturer or experiments. Afterwards the duty cycle of converter would be estimated using circuit equations of measured Thevenin model of the load and battery. Measuring Thevenin equation results in robustness of method respecting variations of load and battery. In the online phase, the classic perturbation and observation (P&O) method will be utilized for fine tuning and tracking of maximum power point. The proposed method has been simulated in MATLAB/SIMULINK workspace and compared with some other MPPT methods. The results reveal that this hybrid method outperforms other methods in term of performance and speed of tracking.     

Wear and corrosion resistance and electroplating characteristics of electrodeposited Cr–SiC nano-composite coatings

Cr–SiC nanocomposite coatings with various contents of SiC nanoparticles were prepared by electrodeposition in optimized Cr plating bath containing different concentrations of SiC nanoparticles. Direct current electrocodeposition technique was used to deposit chromium layers with and without SiC nanoparticles on mild carbon steel. The effects of current density, stirring rate and concentration of nanoparticles in the plating bath were investigated. Scanning electron microscopy was used to study surface morphology. Energy dispersive analysis technique was used to verify the presence of SiC nanoparticles in the coated layers. The corrosion behaviors of coatings were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy methods in 0.05 mol/L HCl, 1 mol/L NaOH and 3.5% NaCl (mass fraction), respectively. Microhardness measurements and pin-on-disc tribometer technique were used to investigate the wear behavior of the coatings.     

Geometrically Non-Linear Rapid Heating of Temperature-Dependent Circular FGM Plates

Based on the uncoupled thermoelasticity assumptions, axisymmetric thermally induced vibrations of a circular plate made of functionally graded materials (FGMs) are analyzed. Each thermomechanical property of the circular plate is assumed to be functions of temperature and thickness coordinate. Solution of the transient one-dimensional heat conduction equation with the arbitrary type of time-dependent boundary conditions is carried out employing the central finite difference method combined with the Crank–Nicolson time marching scheme. Afterwards, with the establishment of the associated Hamilton's principle and the accountancy of the von Kármán type of geometrical non-linearity, the motion equations are obtained with the aid of the conventional multi-term Ritz method. The solution of highly coupled non-linear motion equations is obtained utilizing a hybrid iterative Newton–Raphson–Newmark scheme. After validating the developed computer code, some parametric studies are accomplished to show the influences of various involved parameters. It is shown that temperature dependency, geometrical non-linearity, plate thickness, power law index, and the type of thermal in-plane and out-of-plane mechanical boundary conditions, all affect the temporal evolution of plate characteristics.     

DIELECTRIC PROPERTIES OF MASHED POTATOES

The dielectric properties of mashed potatoes are measured as a function of sample temperature and preparation procedure. The temperature range for the first sample is between 10 and 80°C, the second sample is characterised in the temperature range from ?17.7 to 20.7°C. The results show, that the impact of temperature on the dielectric properties at 2.45 GHz is small in the range above the freezing temperature. In the temperature range, where melting occurs, there is a sharp increase of the relative dielectric constant ε′ and the loss factor ε′′. The measured, inter- and extrapolated values of the dielectric properties are used to calculate the penetration depth δ _p . This parameter can serve as an input parameter for the mathematical modelling of temperature profiles in microwave heating of food of cylindrical and slab-shaped geometry.     

32—THE SNARLING OF HIGHLY TWISTED MONOFILAMENTS. PART I: THE LOAD–ELONGATION BEHAVIOUR WITH NORMAL SNARLING

An account is given of an experimental investigation of the normal snarling of highly twisted monofilaments, those used being vulcanized rubber and nylon.

An earlier theoretical analysis is corrected, and the experimental results show that, after this correction, the theory put forward for the mechanical properties of the snarling mechanism holds reasonably well for elastic filaments. Although, as would be expected, there are larger deviations from the theory for viscoelastic filaments, the theory still gives a good indication of the behaviour of these filaments under torsion.     

Effect of tungsten addition on thermal conductivity of graphite/copper composites

Graphite/copper composites with high thermal conductivity were fabricated by tungsten addition, which formed a thin tungsten carbide layer at the interface. The microstructure and thermal conductivity of the composite material were studied. The results indicated that the insertion of tungsten carbide layer obviously suppressed spheroidization of copper coating on the graphite particles during the sintering process, and decreased the interfacial thermal resistance of the composites. Compared with the graphite/copper composites without tungsten, the thermal conductivity of the obtained composites was increased by 43.6%.     

Static and high-rate loading of single and multi-bolt carbon–epoxy aircraft fuselage joints

Single-lap shear behaviour of carbon–epoxy composite bolted aircraft fuselage joints at quasi-static and dynamic (5 m/s and 10 m/s) loading speeds is studied experimentally. Single and multi-bolt joints with countersunk fasteners were tested. The initial joint failure mode was bearing, while final failure was either due to fastener pull-through or fastener fracture at a thread. Much less hole bearing damage, and hence energy absorption, occurred when the fastener(s) fractured at a thread, which occurred most frequently in thick joints and in quasi-static tests. Fastener failure thus requires special consideration in designing crashworthy fastened composite structures; if it can be delayed, energy absorption is greater. A correlation between energy absorption in multi-bolt and single-bolt joint tests indicates potential to downsize future test programmes. Tapering a thin fuselage panel layup to a thicker layup at the countersunk hole proved highly effective in achieving satisfactory joint strength and energy absorption.     

Accounting for surface–groundwater interactions and their uncertainty in river and groundwater models: A case study in the Namoi River,Australia

Surface–groundwater (SW–GW) interactions constitute a critical proportion of the surface and groundwater balance especially during dry conditions. Conjunctive management of surface and groundwater requires an explicit account of the exchange flux between surface and groundwater when modelling the two systems. This paper presents a case study in the predominantly gaining Boggabri–Narrabri reach of the Namoi River located in eastern Australia. The first component of the study uses the Upper Namoi numerical groundwater model to demonstrate the importance of incorporating SW–GW interactions into river management models. The second component demonstrates the advantages of incorporating groundwater processes in the Namoi River model.Results of the numerical groundwater modelling component highlighted the contrasting groundwater dynamics close to, and away from the Namoi River where lower declines were noted in a near-field well due to water replenishment sourced from river depletion. The contribution of pumping activities to river depletion was highlighted in the results of the uncertainty analysis, which showed that the SW–GW exchange flux is the most sensitive to pumping rate during dry conditions. The uncertainty analysis also showed that after a drought period, the 95% prediction interval becomes larger than the simulated flux, which implies an increasing probability of losing river conditions. The future prospect of a gaining Boggabri–Narrabri reach turning into losing was confirmed with a hypothetical extended drought scenario during which persistent expansion of groundwater pumping was assumed. The river modelling component showed that accounting for SW–GW interactions improved the predictions of low flows, and resulted in a more realistic calibration of the Namoi River model.Incorporating SW–GW interactions into river models allows explicit representation of groundwater processes that provides a mechanism to account for the impacts of additional aquifer stresses that may be introduced beyond the calibration period of the river model. Conventional river models that neglect the effects of such future stresses suffer from the phenomenon of non-stationarity and hence have inferior low flow predictions past the calibration period of the river model. The collective knowledge acquired from the two modelling exercises conducted in this study leads to a better understanding of SW–GW interactions in the Namoi River thus leading to improved water management especially during low flow conditions.