Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

基于i860的存储器子系统设计

微处理机系统中的存储器子系统设计对整个系统性能的高低有重要的影响，尤其当微处理器的主频越来越高时。本文结合实际例子，给出了一个基于ｉ８６０处理器（４０ＭＨｚ）的主存设计方案，讨论了实际中需仔细考虑的因素。该设计可为其它高性能ＲＩＳＣ系统设计提供参考。     

小方坯连铸机的PLC自动控制

本文对弧型小方坯连铸机工艺与设备进行了分析，介绍了连铸生产的ＰＬＣ控制系统。及其软件设计。     

关于不确定的对称组合系统的稳定化控制器与观测器的设计

本文研究了不确定的对称组合系统的稳定化控制器与观测器的设计问题，给出一种设计稳定化控制器与观测器的方法，在这种设计方法中，使给定的带有不确定性的对称组合系统稳定的状态反馈增益矩阵和观测器增益矩阵可由低阶代数Ｒｉｃｃａｔｉ方程的解导出。     

造纸机集散控制系统

本文介绍了造纸机集散控制系统．讨论了其硬件的组成和软件结构．研究了ＤＤＳ过程级控制器的功能及对造纸机各分部速度的优化控制．系统投人运行后，取得较好的经济效益．     

引进型国产300MW汽轮机窜轴事故分析及防止对策

通过引进型国产300MW汽轮机在启动试运中出现的一次窜轴事故,根据计算机追忆打印的有关图表、数据分析了产生事故的原因,并提出了为防止类似事故重演应采取的措施和建议。经采取措施后该机组多次又在相同情况下启机,已安全运行。说明分析正确,措施得当,值得同类型机组借鉴。     

Hydrogen incorporation in Ni–P films prepared by electroless deposition

Electroless NiP films, with 12 to 16 wt % P, were deposited from a moderately acid solution. Thermogravimetric analysis indicates the presence of occluded hydrogen in the layers, which desorbs upon heating. The amount of incorporated hydrogen decreases when the pH of the solution or the nickel sulfate concentration is increased; by contrast it increases with hypophosphite concentration. Cyclic voltammetry, using an electrochemical quartz crystal microbalance, confirms the existence of parasitic reactions, namely the reduction of protons of the solvent during the cathodic process and oxidation of hydrogen during the dissolution of the layers. This behaviour is in qualitative agreement with the proposed reaction scheme.     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

高压高产井电子压力计直读试井应注意的几个问题

在高压高产井电子压力计直读试井中，推荐选用石英作为压力传感器的压力计，附加适量的加重杆，保证压力计顺利入井，并平稳工作；同时选用可靠的井口防喷系统。