以应力分析为基础的汽包封头强度计算

本文介绍应力分析设计法的原理，通过有限元计算得到汽包封头的温度场、应力场，并以应力分析为基础对汽包封头强度作了校核。     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。     

滚子丝杠副的原理研究

本文对滚子丝杠副的运动原理及啮合原理进行分析 ,并推导了参数计算公式及由啮合原理求出了滚子的空间螺旋面方程     

故县水库的开发任务与调度运用

通过对故县水库水文特征分析,论述了水库开发任务和要求。并根据水库的洪水、径流、泥沙特性,拟定了水库防洪运用的控制条件和运用方式,以及水库的兴利运用水位和原则。对水库工程的投资和效益作出了分析和评价。     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

适配器强度有限元分析

使用有限元程序ＳＡＰ５对某新型导弹发射筒内的适配器的强度进行了计算。通过结果分析，找出了适配器危险应力点的分布规律，它对结构选型设计具有指导意义。     

Theoretical and experimental evaluation of the limit state of transit gas pipelines having corrosion defects

The limit carrying capacity of gas pipelines having corrosion defects were evaluated by means of an improved FEM analysis, together with the ANSI/ASME defect judgement and an experimental verification. When compared with our past presentation at the proceedings of the CAPE'93 Colloquium (dealing with reproduced defects), this paper evaluates the remaining lifetime of a pipeline having natural faults. The new improved analysis includes geometrical nonlinearities leading to a modification of limit state parameters and thus matching better with actuality. This presented work was initiated by the firm of Trans-Gas in Prague after having had a pipeline inspected proving some parts of it as being heavily corroded. The task in hand was to determine the remaining pipeline lifetime with the view to at least a two-year period.     

Dynamic elastic-plastic behaviour of whipping pipes: experiments and theoretical model

This paper is concerned with the problem of pipe whip, the dynamic response of a high pressure piping system subjected to an end force as the result of a pipe break which releases a jet of fluid from the broken section. Both experimental and theoretical results are presented concerning the dynamic elastic-plastic behaviour of cantilever pipes subjected to a transverse force pulse at the free end. Comparisons between experimental data and theoretical predictions are made for mild-steel pipes with outer diameter-to-thickness ratios of 19.5, 28 and 32. It is demonstrated that, for these geometries, the whipping pipes display three characteristically different responses, viz. elastic, plastic hardening behaviour for thick pipes, elastic, plastic hardening-softening behaviour for moderately thick pipes and elastic, plastic hardening-softening-collapse behaviour for thinner pipes. The experimental data taken from a series of high-speed films are compared with the predictions of the instantaneous shapes of the whipping pipes derived from both a rigid, perfectly-plastic, large deflection, dynamic beam model and a more comprehensive model which incorporates the effects of elasticity and plastic hardening and softening, the details of which are presented in the paper.     

高层结构几何非线性分析的QR法

本文利用ＱＲ法分析高层建筑结构几何非线性问题，建立了新的计算格式。该法不仅未知量的数目少，精度高，而且输入简单，计算速度快，可以用微机分析复杂问题。     

���ķ������ݲ�ֵ�����о�

岩心分析过程中的取心间隔并非完全相同，这就形成了非等间距的岩心分析数据。测井曲线的数据一般都是采样等间距的，为了使岩心数据与测井数据更好地进行匹配，对岩心分析数据进行插值处理，使分析数据形成等距的形式，然后对插值后的数据根据不同的测井曲线进行滤波，使得岩心分析数据与测井数据的分辨率相匹配，利用处理后的数据建立模型或数据分析才可得到较为准确的模型。克里金插值和分形插值均为非线性的数学插值方法，它们与一般的数学插值方法相比较，能更好地反映数据的内在分布规律。文中分别利用克里金插值和分形插值的理论对岩心数据的插值进行了深入的研究，根据两种插值方法的理论建立了相应的插值方法。经过对两种插值理论的实例对比分析，得到了两种非线性插值方法的优缺点，为进一步的深入研究奠定了一定基础。