Design for a high power-density Astron reactor

A liquid lithium blanket surrounding the plasma volume is described. The liquid lithium flows along magnetic flux tubes at a high speed. There is no vacuum wall between the blanket and the plasma. The E-layer of relativistic particles within which the plasma is confined serves as a vacuum wall protecting the plasma from the lithium vapor, which is continuously produced at the surface of the blanket, by ionizing the lithium atoms and ejecting the same along open magnetic lines. The heat load at the surface of the blanket generated by 14 MeV neutrons can be several hundred MW per square meter.Work performed under the auspices of the U.S. Atomic Energy Commission.Deceased September 24, 1972.     

氧化镧中放射性的去除——Ⅳ.P_(507)-HNO_3体系萃取法去除氧化镧中放射性的扩大试验

本文给出了在P_(507)-HNO_3体系中去除氧化镧中放射性的工艺流程及用混合澄清槽作为萃取设备,在上海跃龙化工厂完成的扩大试验结果。试验表明:α放射性、铁和钙的去污系数都大于1000,镧的回收率大于96％,产品中α放射性小于1计数/h,Fe_2O_3<5ppm,CaO<50ppm,达到了荧光级氧化镧的要求。该流程操作简便、设备简单、稳定性好,可以应用于工业生产。     

Construction of a control system for disturbance rejection using a dual observer

A well‐known control system which can reduce the adverse effects of disturbances is a disturbance observer. However, in many cases of mechanical systems, system disturbances which do not satisfy the matching condition may be imposed. Therefore, it may be difficult to reduce the adverse effects of the disturbances by the traditional disturbance observer. In this paper, a method of control system synthesis for disturbance rejection using a dual observer is proposed. This method is based on the zeroing induced by the disturbance localization problem. This problem may be solved by dividing the state space into observable subspace and unobservable subspace. As compared with an H_∞ controller based on perfect observation, the usefulness of the proposed control system for disturbance rejection is demonstrated by numerical simulations for a two‐mass spring system. © 2002 Scripta Technica, Electr Eng Jpn, 138(4): 50–60, 2002; DOI 10.1002/eej.1138     

上海市松江新城突进式发展的体制创新与探索

本文用理论和现实的案例分析详细阐述了“经营城市”的六项特征和“三赢”的理念 ,简要介绍了松江新城在财政不出一分钱的情况下为取得突进式发展所采取的制度创新和探索 ,并总结了两点如何树立规划权威性的经验。     

A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

复合地基中优化设计参数的方法

本文给出了复合地基应力比置换率设计的优化方法,讨论了复合地基中应力比的基本概念和影响因素,可供工程应用时参考。     

全方位为顾客服务

介绍了Dohmen公司的发展过程，目前的状况及公司的宗旨。     

油罐液位温度自动检测系统及其程序设计

本文介绍了燃油火力发电厂油罐液位及温度数据的计算机数据自动采集及处理系统的结构和基于WINDOWS的可视化程序设计方法，该系统结构简单，成本低，采用RS－485数据接口可视现2千米内的数据通讯，是中小企业实现自动化管理的最佳解决方案。     

Constructing Pseudo-Random Permutations with a Prescribed Structure

We show how to construct pseudo-random permutations that satisfy a certain cycle restriction, for example that the permutation be cyclic (consisting of one cycle containing all the elements) or an involution (a self-inverse permutation) with no fixed points. The construction can be based on any (unrestricted) pseudo-random permutation. The resulting permutations are defined succinctly and their evaluation at a given point is efficient. Furthermore, they enjoy a fast forward property, i.e. it is possible to iterate them at a very small cost. Received 10 August 2000 and revised 30 September 2000 Online publication 9 April 2001     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.