Acceptive Immunity: The Role of Fucosylated Glycans in Human Host–Microbiome Interactions

The growth in the number of chronic non-communicable diseases in the second half of the past century and in the first two decades of the new century is largely due to the disruption of the relationship between the human body and its symbiotic microbiota, and not pathogens. The interaction of the human immune system with symbionts is not accompanied by inflammation, but is a physiological norm. This is achieved via microbiota control by the immune system through a complex balance of pro-inflammatory and suppressive responses, and only a disturbance of this balance can trigger pathophysiological mechanisms. This review discusses the establishment of homeostatic relationships during immune system development and intestinal bacterial colonization through the interaction of milk glycans, mucins, and secretory immunoglobulins. In particular, the role of fucose and fucosylated glycans in the mechanism of interactions between host epithelial and immune cells is discussed.     

Influence of helium ion radiation on the nano-grained Li2TiO3 ceramic for tritium breeding

Lithium titanium oxide (Li₂TiO₃) tritium breeder ceramic plates with nano- and coarse-grain size were fabricated. The preparation methods contained CTAB-modifying precursor, combining dry-pressing with isostatically cold-pressing, and calcinating at optimized sintering temperature in turn. Then their properties were characterized after radiation by 280 keV helium (He⁺) ion. Extensive characterization analyses were performed to reveal the changes in nano-grained and coarse-grained Li₂TiO₃ after radiation. They contained glancing angle X-ray diffraction (GIXRD), atomic force microscopy (AFM), electron spin resonance (ESR), and scanning electron microscopy (SEM). The results showed as follows, GIXRD peak position of the nano-grained Li₂TiO₃ was more stable than the coarse-grained Li₂TiO₃ after radiation. Nano-grained Li₂TiO₃ was less rough and swollen than the coarse-grained one after radiation. Nano-grained Li₂TiO₃ had more excellent structural stability and less defect concentration of Eʹ-center after radiation. As a result, nano-grained Li₂TiO₃ might have much better radiation tolerance than the coarse-grained one by comparing characterization results.     

A matryoshka-like CuS@void@Co3O4 double microcube-locked sulfur as cathode for high-performance lithium-sulfur batteries

Lithium-sulfur battery cathodes still remain a challenge on capacity decay due to the shuttle effect even though a series of strategies have been tried. Here we report a novel matryoshka-like CuS@void@Co₃O₄ architecture of double micro-cubes (μ-cubes) that locks sulfur between the CuS core and the Co₃O₄ shell. Plenty of existing spaces between the μ-cubes suffice a high loading of sulfur and volumetric accommodation. The robust, double closed cubes configuration greatly enhances the confinement of polysulfides. In parallel, the CuS core increases the electronic conductivity and contributes to additional capacity, while the Co₃O₄ shell ensures a better interface activity. A high Li⁺ ion diffusion coefficient is obtained during the sulfur and lithium sulfide transformation. The constructed battery displays an initial capacity up to 1480 mAh g⁻¹, and a Coulombic efficiency (CE) exceeding 99%. A capacity retention higher than 500 mAh g⁻¹ with a CE larger than 99.8% after cycling 400 times at 0.2 C are achieved. In addition, under a temperature of −5 °C, a high capacity of 700 mAh g⁻¹ at 0.2 C after 200 cycles is achieved, indicating a good low-temperature tolerance.     

赤红球菌组氨酸激酶的融合表达和功能分析

对赤红球菌的组氨酸激酶基因进行密码子优化,将优化后的组氨酸激酶基因（rhks）构建重组表达质粒pGEX-4T-2-rhks。将此质粒导入到大肠杆菌BL21（DE3）中进行异源表达。在25 ℃和1 mmol/L异丙基-β-D-硫代吡喃半乳糖苷诱导条件下,组氨酸激酶融合蛋白（GST-RHK）获得成功表达,并具有催化活性。经谷胱甘肽琼脂糖亲和层析纯化,获得电泳纯的GST-RHK,其中纯化倍数为3.1,得率为19.5%。该蛋白大小约为72.75 kDa,Km、Vmax和Kcat值分别为20.92 μmol/L、0.17 μmol/（L·min）和1.4 min－1。野生型赤红球菌、组氨酸激酶基因增强株sdrhkE和组氨酸激酶基因敲减株sdrhkD在分别含有苯酚、甲苯、氯苯、异辛烷4 种有机溶剂的培养基中培养,菌株sdrhkD的生长情况都优于野生型赤红球菌,菌株sdrhkE的生长情况都低于野生型赤红球菌。本研究为进一步揭示赤红球菌SD3中组氨酸激酶涉及的信号转导途径与赤红球菌有机溶剂耐受性的关联机制提供一定参考依据。     

Effects of developmental stage,cold acclimation and diet on the cold tolerance of three species of Cryptolestes (Coleoptera: Laemophloeidae)

Flat grain beetles (Coleoptera: Laemophloeidae) are common stored-product insect pests in Canada, infesting cereals in grain bins, equipment and end products in flour mills. We studied the cold tolerance of the three most common flat grain beetles: Cryptolestes ferrugineus, Cryptolestes turcicus and Cryptolestes pusillus, by measuring the survival at −10 °C and supercooling point (SCP) for different life stages (egg, young larva, old larva, pupa and adult) reared on flour mixed with brewer’s yeast. Probit analysis was used to estimate the lethal time for 50 and 95% mortality. This was done with non-acclimated individuals (only held at 30 °C) or cold-acclimated individuals (held at 18, 10 and 5 °C, for 1 week/temperature). In general, adults were the most cold-hardy stage for each of the species. Acclimated insects were anywhere from no increase in cold tolerance to 14-fold more cold-tolerant than the corresponding non-acclimated stage and species. Cryptolestes ferrugineus was most cold-tolerant species (58 d at −10 °C to reach 95% mortality for acclimated adult), C. turcicus was the next most cold-tolerant, (39 d) and C. pusillus was the least cold-tolerant (11 d). The cold tolerance of adults reared on three diets was measured both for acclimated and non-acclimated insects. The adults reared on grain diet (whole wheat kernels, cracked wheat kernels and wheat germ (90:5:5 mass ratio) were the most cold-tolerant, adults reared on white-wheat flour and brewer’s yeast diet (95:5 mass ratio) had the next highest cold tolerance followed by the adults reared on 100% white-wheat flour. Supercooling point (SCP) of insects ranged from −20.6 to −26.7 °C. In general, acclimated insects had slightly lower SCP than non-acclimated insects.     

Trehalose and proline failed to enhance cold tolerance of the cowpea weevil,Callosobruchus maculatus (F.) (Col.: Bruchidae)

The cowpea weevil, Callosobruchus maculatus (F.) (Col.: Bruchidae) is a cosmopolitan field-to-store pest ranked as the major post-harvest pest of cowpea in tropical regions. The cold tolerance of an insect species can vary as a result of abiotic features including food resources. In this study, C. maculatus larvae were fed with proline and trehalose (10, 20, and 40 mmol) treated cowpea seeds to determine the effects of these potential cryoprotectants on the supercooling (SCP) and cold hardiness of the upcoming adult beetles. The SCPs of the control, proline-fed and trehalose-fed adults non-significantly changed from −18.2 °C for the control to −17.2 °C for trehalose-fed adults. The cold hardiness (24 h at 0, -5.0, −7.5, −10.0, and −12.5 °C) of the adults was almost the same for control and treatments. Median lethal times (LT₅₀; lethal time for 50% mortality) were 6.3, 6.0, and 5.4 h, respectively. Moreover, feeding the larvae with proline and trehalose-treated seeds did not affect the proline and trehalose contents of the adult beetles. Our results showed that C. maculatus could not tolerate subzero temperatures well above their SCP, indicating that this species might be a chill-susceptible insect.     

Pd coated one-dimensional Ag nanostructures: Controllable architecture and their electrocatalytic performance for ethanol oxidation in alkaline media

One-dimensional (1D) metal-coated Pd structures are efficient catalysts for the ethanol electro-oxidation and promising strategy for minimizing the Pd-loading toward commercialization of direct ethanol fuel cells (DEFCs). Herein, the decorated and core-shell architectures of a novel Pd coating on Ag nanowires (PdAg-NWs) are controllable by a two-step polyol method based on the galvanic replacement reaction. The integration of uniform shell with a low Pd concentration and partial hollow structure onto 1D PdAg-NWs exhibits the highest efficiency for ethanol oxidation reaction (EOR) in alkaline solution. In comparison with Pd nanoparticles (PdNPs/C), the PdAgNWs/C performes 11 times superior EOR activity, and the onset potential shifts 80 mV negatively. The presence of Ag in PdAg-NWs enhances the absorption capacity of ethanol molecules and hydroxyl ions on the active sites, and improves the catalyst tolerance to CO-like intermediates, making them a potential anodic catalyst for DEFCs.     

基于PBFT区块链技术的电网企业仓储系统

提出了一种基于实用拜占庭容错(PBFT)算法的区块链技术,首先对传统的实用拜占庭容错算法原理进行了阐述,该传统算法包含前期、需求、预准备、准备、确认、答复6个阶段,但传统算法具有实时性差、缺乏惩罚机制、带宽高的缺点。针对出现的这些问题,又对传统算法进行了改进,具体涉及记账节点、共识过程以及视图切换过程。通过测试进一步证明了该改进算法的实用性,并将该算法应用于电网企业中,构建的虚拟仓库实现了联储联备,降低了库存资金的耗费,并且提高了电网企业库存管理的效率。     

Digital twin-based assembly data management and process traceability for complex products

Complex products such as satellites, missiles, and aircraft typically have demanding requirements for dynamic data management and process traceability. The assembly process for these complex products involves high complexity, strong dynamics, many uncertainties, and frequent rework and repair, especially in the model development stage. Achieving assembly data management and process traceability for complex products has always been a challenge. A recently proposed solution involves one-to-one mapping of the corresponding physical entity, also known as the digital twin method. This paper proposes a digital twin-based assembly data management and process traceability approach for complex products. First, the dynamic evolutionary process of complex product assembly data was analyzed from three dimensions: granularity, period and version. Then, a framework of digital twin-based assembly data management and process traceability for complex products was constructed. Some core techniques are: 1) workflow-based product assembly data organization and version management; 2) synchronous modeling of the product assembly process based on digital twin; and 3) hierarchical management and traceability of product assembly data based on digital twin. On this basis, an algorithm flowchart for generating a product assembly data package was created, which includes product assembly data management, assembly process traceability, and generation of a product assembly data package. Furthermore, the Digital Twin-based Assembly Process Management and Control System (DT-APMCS) was designed to verify the efficiency of the proposed approach. Some aerospace-related assembly enterprises are currently using DT-APMCS and achieving satisfactory results. Finally, a summary of our work is given, and the future research work is also discussed.