坐标旋转法的收敛性,误差估计及扩展

本文通过推广正规序列的定义,得到一个不等式,由此证明了统一计算初等函数数值的坐标旋转法的收敛性,作了误差估计,并拓广了所计算的函数范围,成为快速计算所有初等函数的统一算法．     

MIMO系统中的分组全分集全码率空时编码

针对未编码的多输入多输出（MIMO，Multi—Input Multi—Output）系统，提出一种复杂度适中的分组全分集全码率（GFDFR，Group—wise Full Diversity Full Rate）空时编码方案。该方案通过在发送端进行天线分组，各组独立编码，减小全分集全码率（FDFR，Full Diversity Full Rate）编码块的大小从而降低系统编解码复杂度；在频率选择性信道中，进一步对子载波分组进行独立编码，获得频率分集（或多径分集），以适中的复杂度在不降低系统分集度的情况下保证了信息的全码率传输，是一种在MIMO信道中极具实用价值的空时编码方案。     

东营凹陷滚动勘探开发技术研究与应用

东营凹陷已进入勘探开发成熟期 ,滚动勘探开发是增储稳产的主要手段 ,精细油藏描述是其关键。总结滚动勘探开发的 4种方式 (老区扩边、发现新块、发现新层系和新区滚动勘探开发 ) ,对断块复杂程度提出按每平方千米内所有断层的累加长度划分的新方法 ,从构造描述、储集层描述和油藏描述方面介绍了滚动勘探开发的技术方法。以永 8断块为例 ,在层位标定、反射特征分析、构造描述流程、地震地质分析等方面进行深入分析 ,归纳精细油藏描述的具体方法 ,强调了三维地震数据体的相干分析、属性分析等技术的重要作用。应用这一滚动勘探开发技术 ,使东营凹陷每年新增滚动储量近2 0 0 0× 10 4 t。图 3参 10     

Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.     

茨21-133井CO2吞吐技术初步试验

茨榆坨油田茨13块原油属于普通稠油，1993年开始蒸汽吞吐采油，从第二轮开始效果明显变差，注汽返排率低，有效周期短，产量下降快，套管变形井增多。针对这些问题，在该区块茨21—133井进行CO2吞吐采油工艺现场试验，获得成功，增油效果明显。     

卡西欧FX-4800P计算器编程在滹沱河倒虹吸工程施工测量中的应用

结合建筑物的结构特点利用卡西欧FX-4800P计算器编程,配合全站仪进行现场测量放样,能将施工测量中计算、施测、资料整理及校核工作同时进行,有效提高了施工测量的精度及效率,且计算器体形轻巧,便于携带和使用.     

Synthesis and properties of novel amphiphilic sulfated ionomers by the ring‐opening reaction of an epoxidized styrene–butadiene–styrene triblock copolymer

A method for the synthesis of novel sulfated ionomer of styrene–butadiene–styrene triblock copolymer (SBS) was developed. SBS was first epoxidized by performic acid in the presence of a phase‐transfer catalyst; this was followed by a ring‐opening reaction with an aqueous solution of alkali salt of bisulfate. The optimum conditions for the ring‐opening reaction of the epoxidized SBS with an aqueous solution of KHSO₄ were studied. During the ring‐opening reaction, both phase‐transfer catalyst and ring‐opening catalyst were necessary to enhance the conversion of epoxy groups to ionic groups. The products were characterized with Fourier transform infrared spectrophotometry and transmission electron microscopy (TEM). After the potassium ions of the ionomer were substituted with lead ions, the lead sulfated ionomer exhibited dark spots under TEM. Some properties of the sulfated ionomer were studied. With increasing ionic groups or ionic potential of the cations, the water absorbency and emulsifying volume of the ionomer and the intrinsic viscosity of the ionomer solution increased, whereas the oil absorbency decreased. The sulfated ionomer possessed excellent emulsifying properties compared with the sulfonated SBS ionomer. The sodium sulfated ionomers in the presence of 10% zinc stearate showed better mechanical properties than the original SBS. When the ionomer was blended with crystalline polypropylene, a synergistic effect occurred with respect to the tensile strength. The ionomer behaved as a compatibilizer for blending equal amounts of SBS and oil‐resistant chlorohydrin rubber. In the presence of 3% ionomer, the blend exhibited much better mechanical properties and solvent resistance than the blend without the ionomer. SEM photographs indicated improved compatibility between the two components of the blend in the presence of the ionomer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

自焙炭块在大型高炉上应用十年概况

自焙炭块陶瓷砌体复合炉缸技术在大型高炉上的应用已有10年，总的来说是成功的，但由于自焙炭块自身的特性，应用中也暴露出了一些问题。通过对国内大型高炉应用自焙炭块陶瓷砌体复合炉缸技术的全面调查，分析了该技术的应用前景，提出了改进措施。